Selective backlight allows the user to choose actions that will not enable the backlight when pressed. Advanced softlock allows user to choose actions that will not be blocked by screenlock on devices without a hold button. Both only occur in FM and WPS Contexts. Update: Back from the dead -Cleaned up code, removed unnecessary calls, re-arranged last filter action timeout conditional to work in case last_filtered_action_tick was never set -Added entries to the manual -Fixed back button on some menus not activating backlight -Made menus more intuitive, no actions selected now changes menu item to off. -Added talk fuctionality. -Added option to disable selective backlight while on external power. -Rewrote backlight and softlock handling code to fix issue with scrollwheels -Menu changed to have toggle(yes/no) and settings -Optimized selective actions lookup -Added option to disable notification of 'buttons locked' while softlocked -Removed uneeded code, consolidated action lookup to single function -Fixed incorrect name on selective softlock menu -Added option to disable touch on touchscreen devices -Fixed backlight on original screenlock without selective screenlock active -Added text selection in mask_select for when show_icons is off -Fixed voice in mask_select to speak if voice is defined instead of spelling -Added more lang defines (play skip seek) -Added option to disable unknown keys turning on backlight -Fixed Conditional argument In wrong place causing players without backlight to fail to build -Fixed Disable Unknown blocking detection of context change -Fixed canceling menu didn't update new settings -Added Autolock on backlight off -Removed backlight_on_force from backlight.c, Now sets ignore next to false and uses backlight_on -Cleaned up autolock code added strings to lang file -Fixed issue where rapid presses would bypass softlock -Removed old softlock code, Cleaned selective actions code -Changed menu to match existing RB menus -Fixed Backlight_on_Hold blocked by backlight_ignore_next -Fixed ignore_next for ipod -Fixed bug allowing context with softlock to bypass selective backlight -Changed mask_select to no longer prompt for changes to be saved -Changed menu names -Added ignore timeout to allow ipod scroll wheel to work properly and other players to still work properly, removed some previous code including ignore_event -Increased ignore timeout to prevent sd card accesses from interrupting action code and turning on backlight -Changed Unknown action to unmapped action in menu, changed handling code -Removed unneeded logic and variables for handling unfiltered actions -Reverted unmapped action code to previous functionality -Added manual entries (thanks JohnB) -Removed elusive unhandled unicode character from manual, changed formatting slightly Actions: Volume,Play,Seek,Skip Extras: Disable unmapped actions Disable selective backlight on external power Disable touch during softlock on touchscreen devices Disable softlock notifications (power button still notifies) Autolock on backlight off Method: Adds a function to ignore backlight on next call If selected action occurs backlight is forced on, Filter_first_keypress stays intact. Selective softlock allows selected actions through, bypasses the normal softlock routine. ToDo: DONE previous commit (#1) has attribution for folder_select.c which mask_select is based from. Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4
seems more logical to me, and is more consistent, since "SAMSUNG_YH92X_PAD" is already used in the tex files. Change-Id: Ie9a9d850ea86155a7dcf86c88a22a420a10a3837
Change-Id: I65da2064951972368a2880d271280e5b5ae878fe
Reorganization - Separated iBasso devices from PLATFORM_ANDROID. These are now standlone hosted targets. Most device specific code is in the firmware/target/hosted/ibasso directory. - No dependency on Android SDK, only the Android NDK is needed. 32 bit Android NDK and Android API Level 16. - Separate implementation for each device where feasible. Code cleanup - Rewrite of existing code, from simple reformat to complete reimplementation. - New backlight interface, seperating backlight from touchscreen. - Rewrite of device button handler, removing unneeded code and fixing memory leaks. - New Debug messages interface logging to Android adb logcat (DEBUGF, panicf, logf). - Rewrite of lcd device handler, removing unneeded code and fixing memory leaks. - Rewrite of audiohw device handler/pcm interface, removing unneeded code and fixing memory leaks, enabling 44.1/48kHz pthreaded playback. - Rewrite of power and powermng, proper shutdown, using batterylog results (see http://gerrit.rockbox.org/r/#/c/1047/). - Rewrite of configure (Android NDK) and device specific config. - Rewrite of the Android NDK specific Makefile. Misc - All plugins/games/demos activated. - Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa. Includes - http://gerrit.rockbox.org/r/#/c/993/ - http://gerrit.rockbox.org/r/#/c/1010/ - http://gerrit.rockbox.org/r/#/c/1035/ Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight interface and new option for hold switch, touchscreen, physical button interaction. Rockbox needs the iBasso DX50/DX90 loader for startup, see http://gerrit.rockbox.org/r/#/c/1099/ The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If /mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit gracefully and the loader will restart Rockbox on USB disconnect. Tested on iBasso DX50. Compiled (not tested) for iBasso DX90. Compiled (not tested) for PLATFORM_ANDROID. Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port. The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port. Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did was to separate the code for DX50 (&DX90) from the android target. On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it. What else I changed from Ilias sources besides the separation from the target "android": * removed a dirty hack to keep backlight off * changed value battery meter to voltage battery meter * made all plugins compile (named target as "standalone") and added keymaps * i added the graphics for the manual but did not do anything else for the manual yet * minor optimizations known bugs: * timers are slowed donw when playback is active (tinyalsa related?) * some minor bugs Things to do: * The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights. Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go. * All the wiki and manual to build: needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed ./tools/configure select iBasso DX50 or iBasso DX90 make -j apk the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed) the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed) The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary. Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his bitbucket page, using the CWM-OF and his installation script package. Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0 Reviewed-on: http://gerrit.rockbox.org/941 Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw> Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Although both players basically have the same keys, the differences in the layout is rather big, so I think both deserve their own keymaps. (On the yh820 the FFWD/PLAY/REW buttons are located above the direction keys, on the yh920 at the side of the player. Furthermore the yh920/925 has a REC switch, whereas yh820 has a push button.) Change-Id: I0e62a1b101c387646c0bdb07ea142d9d2430ca15 Reviewed-on: http://gerrit.rockbox.org/814 Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
This function is a fully-fletched, high-level pixel-based line printer, that combines functionality of several firmware and list functions. It can draw spacing, icons and text in a single call, in any order and each multiple times. It can also apply line decorations at the same time. It features printf-like semantics by accepting a format string that contain format tags as well as inline text. It's accessible directly, but also through the multi-screen api for plugins. Change-Id: I70f5a77bbf4b0252521f2e47ead377b9d6d29b54
Change-Id: Ie36e48742c0ed9aa3fd6f49aa034a11d2492327c
The port uses the imx233 soc, it's a STMP3650 based Samsung player Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4 Reviewed-on: http://gerrit.rockbox.org/490 Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>