rockbox/apps/beep.c, branch duke3d

Enable setting of global output samplerate on certain targets.

2013-07-06T02:22:04+00:00

Replaces the NATIVE_FREQUENCY constant with a configurable frequency.

The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".

"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.

If the hardware doesn't support 48000Hz, no setting will be available.

On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.

The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).

If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.

Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

Make rbcodec/dsp includes more specific.

2012-04-29T21:31:30+00:00

Change-Id: Idb6af40df26f5b8499a40e8b98602261ef227044

Tweak paramters of mp3_play_data and callback.

2012-03-04T19:50:47+00:00

Use generic void * and size_t and make mp3_play_data and its callback
agree on types. Use mp3_play_callback_t instead of prototyping
right in the function call (so it's not so messy to look at). Change
doesn't appear to require plugin API version increment.

Change-Id: Idcab2740ee316a2beb6e0a87b8f4934d9d6b3dd8

Revise the PCM callback system after adding multichannel audio.

2012-03-03T06:23:38+00:00

Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording  uses "void **addr".
"const" is put in place throughout where appropriate.

Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.

Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

beep/mixer code: Code police a bit.

2012-02-19T05:38:58+00:00

/firmware is in the #include path with makes #include "asm/beep.c" sufficient.

Add a comment to generic beep code and make another express intent better.

Change-Id: I587cd704478b894785927bdfe2e647e28614df62

Split CPU-optimized beep code into the firmware/asm tree.

2012-02-18T09:50:33+00:00

For now due to current lack of an apps/asm, place the ASM/generic code in the
firmware/asm directory.

Additionally, make generic beep code more generic.

Change-Id: I4a69b6ffcbb97d9e6dfde2209c5a118de19e5638

Do some adjustments to alleviate IRAM congestion on some targets from r30097. Include removing pointless IRAM declarations in pcmbuf.c because that callback code runs at a fairly relaxed pace. M5 is still the biggest problem.

2011-06-29T09:39:13+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30100 a1c6a512-1295-4272-9138-f99709370657

Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.

2011-06-29T06:37:04+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30097 a1c6a512-1295-4272-9138-f99709370657