rockbox/apps/features.txt, branch working

Get rid of USE_ROCKBOX_USB

2015-01-08T15:07:12+00:00

Except for unfinished or experimental ports, it isthe case that
USE_ROCKBOX_USB and HAVE_USBSTACK are both defined or both undefined.
Furthermore, it is a leftover of some early developments on the USB stack and
doesn't make sense anymore.

Change-Id: Ic87a865b6bb4c7c9a8d45d1f0bb0f2fb536b8cad
Reviewed-on: http://gerrit.rockbox.org/1091
Reviewed-by: Amaury Pouly

Fuze+: add a configurable deadzone area for touchpad buttons

2014-09-08T09:21:54+00:00

To stop erroneous button presses, allow users to add a deadzone between
the button via the Settings > General > System menu > Touch Dead Zone.

The configuration was chosen this way: the touchpad has the same DPI
in both direction so the setting applies the same on both the X and Y
axis. The setting ranges from 0 to 100 and is internally multiplied by 2
giving a maximum deadzone of 2*100 = 200 around each button, which
account for 400 total (once around each button), effectively reducing
each virtual button from 1000x600 to 600x200 when using the maximum value.

Change-Id: I8683c63d2950200eb32d1dda0a00bbd92d83d5be
Reviewed-on: http://gerrit.rockbox.org/677
Reviewed-by: Benjamin Brown 
Tested: Benjamin Brown 
Reviewed-by: Amaury Pouly

apps: factor depth3d capability in features.txt

2013-09-25T12:31:39+00:00

Currently the 3 possible sources for this setting are: imx233, wm8750, wm8978

Change-Id: I4f2b23dbe203f2b357a264b77f801c7b4c28bdee

Enable setting of global output samplerate on certain targets.

2013-07-06T02:22:04+00:00

Replaces the NATIVE_FREQUENCY constant with a configurable frequency.

The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".

"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.

If the hardware doesn't support 48000Hz, no setting will be available.

On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.

The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).

If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.

Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL

2012-05-09T12:32:38+00:00

Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius

Finally commit FS#5111 - piezo clicker for ipods!

2011-11-16T10:25:43+00:00

Origional implementation by Robert Keevil with contributions from Frederik Vestre,  Stoyan Stratev, Craig Elliott, Michael Sparmann,  Thomas Schott, Rosso Maltese, and syncs from a bunch of other people!

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30995 a1c6a512-1295-4272-9138-f99709370657

Add "USB Hide Internal Drive" option for multidrive devices with software usb.

2011-09-09T16:15:35+00:00

This option allows accessing the card slot from "dumb" USB hosts like some car
audio systems that do not handle multi-LUN devices.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30489 a1c6a512-1295-4272-9138-f99709370657

Make the histogram code usable for playback as well. Move the recording histogram code to peakmeter, rename it to remove the recording reference, and rename anything referring to it as well. Change the drawing code so there are more options to position them. This may change your histogram settings, so check after upgrading.

2011-06-05T12:36:27+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29969 a1c6a512-1295-4272-9138-f99709370657

Add 'lowmem' feature to the manual, defined if MEM <= 2

2010-08-25T14:10:25+00:00

Use it to remove mentions of Doom/mpegplayer/midiplay because these
plugins aren't built on such models

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27881 a1c6a512-1295-4272-9138-f99709370657

Manual - Recording source settings description: replace target options with the correct features (needs one more in features.txt). Correct(s) wrong list of options in some manuals (e.g. Gigabeat S) at the same time.

2010-07-25T00:27:07+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27544 a1c6a512-1295-4272-9138-f99709370657