rockbox/apps/keymaps/keymap-mr500.c, branch master

FS#10785: Add new context CONTEXT_MORSE_INPUT for keymaps which is used during morse input mode in virtual keyboard.

2010-01-16T13:54:10+00:00

This will enable to use morse input on targets that doesn't have enough key for both the keyboard and morse input in one context.
Enable morse input on archosondio as an example.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24250 a1c6a512-1295-4272-9138-f99709370657

Fix further tabs

2010-01-03T10:50:34+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24156 a1c6a512-1295-4272-9138-f99709370657

FS#10338: Add "use morse input " entry to settings menu

2009-11-08T13:14:50+00:00

* Remember last used text input mode (keyboard or morse input) in settings.
* Add setting "Use Morse Code Input" under Settings -> General Settings -> System.

Now it is possible for some of targets without button combo for changing input mode to use morse input by changing the setting. it's not possible for them to change input mode during in the keyboard screen of course.
There are still targets without morse input mode.

Flyspray: FS#10338
Author: myself, David Johnston

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23567 a1c6a512-1295-4272-9138-f99709370657

Quickscreen: 4th item

2009-08-29T14:42:03+00:00

This adds a 4th top item to the quickscreen. It's as configurable as the existing three items.
This patch goes along with optimisations for small screens for better displaying of all four items. 14px font is very usable on a 64px height display for example.
Left and Top items go through the items in the opposite direction, so that you can mirror a setting and toggle through it in both directions.
Default item is party mode, as it's target independant.

Flyspray: FS#9706

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22532 a1c6a512-1295-4272-9138-f99709370657

M:Robe 500: Make yes/no screen work better and add appropriate strings for some screens. Rockboy: Improve m:robe 500 default keymap.

2009-08-08T07:21:37+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22201 a1c6a512-1295-4272-9138-f99709370657

M:Robe 500: Commit some minor changes and some keymap changes (short press power takes you out of the WPS)

2009-05-15T13:43:30+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20942 a1c6a512-1295-4272-9138-f99709370657

fix red... who went and changed the remote defines?! :p

2009-05-15T05:23:59+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20936 a1c6a512-1295-4272-9138-f99709370657

get the quickscreen working on the mr500. hold "mode" on the remote to get to it, then you can use the 4 directions on the remote, or the touchscreen to change the values. "mode" will exit, as will pressing in the top or middle of the main screen

2009-05-15T05:08:28+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20935 a1c6a512-1295-4272-9138-f99709370657

M:Robe 500 - Fix some of the Keymaps, touchscreen improvements to decrease inacurate reads, add support for dynamic frequency (was running at 87.5 MHz, now it runs at 175 MHz when boosted), disable clock to unneded modules (decreased power by 20 mA), LCD turnoff now works without graphic glitches, battery ADC read now returns scaled voltage, define backlight fading

2009-05-02T23:25:55+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20846 a1c6a512-1295-4272-9138-f99709370657

More M:Robe 500 work: PCM stopping and pausing roughly works, added some keymaps for the WPS screen, and peakmeter now works properly.

2009-03-24T16:40:31+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20511 a1c6a512-1295-4272-9138-f99709370657