Selective backlight allows the user to choose actions that will not enable the backlight when pressed. Advanced softlock allows user to choose actions that will not be blocked by screenlock on devices without a hold button. Both only occur in FM and WPS Contexts. Update: Back from the dead -Cleaned up code, removed unnecessary calls, re-arranged last filter action timeout conditional to work in case last_filtered_action_tick was never set -Added entries to the manual -Fixed back button on some menus not activating backlight -Made menus more intuitive, no actions selected now changes menu item to off. -Added talk fuctionality. -Added option to disable selective backlight while on external power. -Rewrote backlight and softlock handling code to fix issue with scrollwheels -Menu changed to have toggle(yes/no) and settings -Optimized selective actions lookup -Added option to disable notification of 'buttons locked' while softlocked -Removed uneeded code, consolidated action lookup to single function -Fixed incorrect name on selective softlock menu -Added option to disable touch on touchscreen devices -Fixed backlight on original screenlock without selective screenlock active -Added text selection in mask_select for when show_icons is off -Fixed voice in mask_select to speak if voice is defined instead of spelling -Added more lang defines (play skip seek) -Added option to disable unknown keys turning on backlight -Fixed Conditional argument In wrong place causing players without backlight to fail to build -Fixed Disable Unknown blocking detection of context change -Fixed canceling menu didn't update new settings -Added Autolock on backlight off -Removed backlight_on_force from backlight.c, Now sets ignore next to false and uses backlight_on -Cleaned up autolock code added strings to lang file -Fixed issue where rapid presses would bypass softlock -Removed old softlock code, Cleaned selective actions code -Changed menu to match existing RB menus -Fixed Backlight_on_Hold blocked by backlight_ignore_next -Fixed ignore_next for ipod -Fixed bug allowing context with softlock to bypass selective backlight -Changed mask_select to no longer prompt for changes to be saved -Changed menu names -Added ignore timeout to allow ipod scroll wheel to work properly and other players to still work properly, removed some previous code including ignore_event -Increased ignore timeout to prevent sd card accesses from interrupting action code and turning on backlight -Changed Unknown action to unmapped action in menu, changed handling code -Removed unneeded logic and variables for handling unfiltered actions -Reverted unmapped action code to previous functionality -Added manual entries (thanks JohnB) -Removed elusive unhandled unicode character from manual, changed formatting slightly Actions: Volume,Play,Seek,Skip Extras: Disable unmapped actions Disable selective backlight on external power Disable touch during softlock on touchscreen devices Disable softlock notifications (power button still notifies) Autolock on backlight off Method: Adds a function to ignore backlight on next call If selected action occurs backlight is forced on, Filter_first_keypress stays intact. Selective softlock allows selected actions through, bypasses the normal softlock routine. ToDo: DONE previous commit (#1) has attribution for folder_select.c which mask_select is based from. Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4
The main "innovation" in this patch are two "virtual buttons" for the record switch on YH92x targets. When the switch state changes, a single BUTTON_REC_SW_ON or .._OFF button event will be generated. Thus keymap code can react on switching, but not on the actual state of the switch. Wherever sensible, the following user scheme is applied: - use PLAY as confirm button - use REW button or Long REW to exit - use REC (YH820) or FFWD (YH92X) as modifier key for button combos Change-Id: Ic8d1db9cc6869daed8dda98990dfdf7f6fd5d5a1
Change-Id: I3d73027a9c8a8f885ffbc5cb28dd210ecf2f4285
Depends on http://gerrit.rockbox.org/r/#/c/1043/. This patch adds a new setting in Settings -> General -> System: USB Mode. Usable in Quickscreen and Shortcuts. Possible settings are: - Mass Storage: The default, on USB connect export the internal and external drives as usual. Rockbox will exit gracefully in this case, since the internal drive (/mnt/sdcard) is exported as mass storage device and Android prevents Rockbox from continued execution. - Charge Only: USB charge only, do not export the internal and external drives. This will not close Rockbox. - ADB: Enable the Android Debug Bridge. This will not close Rockbox. Charge only and ADB are actually the same, since it is not yet established if charge only is doable without adb and major hooks into Android. German translation provided. This may be genric for Android based devices but is only enabled for iBasso Devices. Other maintainers may choose do adopt this. Change-Id: I616247c29946c6595ebcf8f0c14b2410c9f0498b
Depends on http://gerrit.rockbox.org/r/#/c/1043/. This patch adds a new setting in Settings -> General -> System: Freq Scaling Governor Usable in Quickscreen and Shortcuts. Possible settings are: - Conservative: Slow frequency switching. - Ondemand or Interactive: Fast frequency switching. - Powersave: Allways lowest frequency. - Performance: Allways highest frequency. German translation provided. This may be genric for Android kernel based devices but is only enabled for iBasso Devices. Other maintainers may choose do adopt this. Change-Id: I10296f5be9586ad3a409105db0cd03682a30e9c1
perceptual bass enhancement - a bbe-ish group delay corrction with Biophonic EQ boost. - precut auditory fatigue reduction -reduce signal in frequency that may trigger temporary threshold shift haas surround -frequency between f(x1) and f(x2) is always bypassed. -can apply to side only. Change-Id: Icb6355ce9b1c99bf2c58c9385c3c411c0ae209d3
To stop erroneous button presses, allow users to add a deadzone between the button via the Settings > General > System menu > Touch Dead Zone. The configuration was chosen this way: the touchpad has the same DPI in both direction so the setting applies the same on both the X and Y axis. The setting ranges from 0 to 100 and is internally multiplied by 2 giving a maximum deadzone of 2*100 = 200 around each button, which account for 400 total (once around each button), effectively reducing each virtual button from 1000x600 to 600x200 when using the maximum value. Change-Id: I8683c63d2950200eb32d1dda0a00bbd92d83d5be Reviewed-on: http://gerrit.rockbox.org/677 Reviewed-by: Benjamin Brown <foolshperson@gmail.com> Tested: Benjamin Brown <foolshperson@gmail.com> Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This patch adds a configurable line separator between list items, very similar to lists in Android. Additionally, below the list item there is a thicker line. It can be disabled in the settings. Its color can be configured as well. Remote and monochrome displays are explicitly unsupported. If there is desire this can be changed but it doesn't seem useful to me. Change-Id: I005313b0d8f5ecd15864bf20e66ea4e3390d8b7d
This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
In most of the translations strings with SYSFONT in title is translated. This leads to displaying problem in (at least) graphical equalizer due to the lack of non-latin character support in the built-in font. Change-Id: I0d27a5358e4eb539d4247c84975d8501d7668836 Reviewed-on: http://gerrit.rockbox.org/727 Reviewed-by: Thomas Martitz <kugel@rockbox.org>