rockbox/apps/menus, branch wolf3d

YH-820: prohibit to change time/date on some hardware versions

2019-02-07T22:06:54+00:00

This patch will autodetect these players, where setting the time/date
would leave the player in an unusable state.

Change-Id: I0579610ce7c10152ace27bb9c06cf6cb2aab8052

FS#12353: For car adapter mode, make delay before resuming configurable

2019-02-03T22:36:57+00:00

Original patch by Stanislav Chizhik
Udpated by Igor Poretsky & myself

Change-Id: I472d4852ac25885658245f077723e4c98b9ad9b8

Fix possible truncation misc.c->output_dyn_value + use Kibytes

2018-12-10T04:54:55+00:00

output_dyn_value now requires the count for number of units

Binary scale now shows Kibibytes instead of kilobytes (g#1742)

Fixes output for negative values as well

Change-Id: I8aa896860e97d2453fa35069e2dfe1caac60109f

Fix menu warnings

2018-10-17T22:06:31+00:00

change offending bool return to int

warning: cast between incompatible function types from
'_Bool (*)(void)' to 'int (*)(void)' [-Wcast-function-type]

forgot to remove -- typedef int (*menu_function)(void);

Change-Id: Ie4c8d3ddb0fb7843c4ec584203350d658d6bee3e

Revert "As3525 v1/v2 Add power savings menu"

2018-07-28T15:35:07+00:00

This reverts commit 6f0320a9535bc1aa81d83fa879ac14d5ee603658.

Change-Id: I7425d422a4a0af7a49e9194cfe0bb55d431bc401

Add cleaned-up xDuoo X3 support

2018-07-28T14:56:31+00:00

Cleaned up, rebased, and forward-ported from the xvortex fork.

(original credit to vsoftster@gmail.com)

Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy

As3525 v1/v2 Add power savings menu

2018-07-27T21:56:32+00:00

Allow user to select cpu undervolt

There have been quite a few issues across the SANSA AMS line related
to CPU undervolting while most players show greatly increased runtime
some crash.
Rather than constanly upping the voltage we now have a
setting with a safe value for all players and the option for lower voltages

I plan to add a few other options here later such as disk
timings and maybe some other clocks/experimental settings

Added: Disk Low speed option for AS3525v2 devices cuts
	frequency to 12 MHz from 24 MHz
Added: Disk Low speed option for AS3525v1 devices cuts
        frequency to 15.5 MHz from 31 MHz

Added: I2c Low Speed AS3525 devices, should be bigger improvement for v1 devices

Fixed: Debug menu for AS3525v2 No SDSLOT frequency,
	Showed IDE freq though it is unused

Added: DBOP and SSP underclocking affects display on v1/v2 respectively

Fixed: debug menu now has SSP frequency, and SSP_CPSR

Update: made settings menu more generic

Update: cleaned up code

Added: Clip v1 & Fuze v1 didn't have HAVE_ADJUSTABLE_CPU_VOLTAGE.
	not sure why but,  waiting on testing to confirm

Added: C200v2 and E200v2 devices and HAVE_ADJUSTABLE_CPU_VOLTAGE.

Fixed: v1 devices don't like display timing set lower (dbop)
       v1 devices don't have a divider set for ssp (causes divide by 0)

Fixed: ClipZip display lags with Max SSP divider changed from 0xFE to 0x32

Fixed: v1 devices didn't work properly with highspeed sd cards
	Added code from http://gerrit.rockbox.org/r/#/c/1704/
	Added powersave and IDE interface enable/disable

Added: V2 devices now have powersave enabled on sd interface

Update: cleaned up code, lang defines, added manual entries

Update ssp clock mechanism added calculated ssp divider to clipzip

Update turn display clock off when clip+ turns off display

Fixed: clipzip wrong register for SSP clock

Change-Id: I04137682243be92f0f8d8bf1cfa54fbb1965559b
TODO: add other players?

Agptek Rocker: Implement RTC support

2018-06-12T08:31:15+00:00

Add define in config file to enable RTC support in rockbox,
Fix time_menu.c to include radio.h only when tuner is present
Implement time setting function on linux (was empty stub)

Not tested.

Change-Id: I40e6c4a6c1b66ada9cf4e698e502e221d0fc44df

Do playback restarts the proper way

2017-11-24T13:55:49+00:00

It isn't necessary to explicitly stop and restart playback to
force it to update something that must cause rebuffering.

Change-Id: I6ff5394fcafc7374af67ef9fbf9022bb4a79b773

Implement speaker enable/disable on jack (un)plug

2017-02-04T16:22:08+00:00

The implementation is not very complicated but there are a few things worth
noting. There was a previous "speaker enable" setting but it was a boolean.
I decided to replace it with a choice setting that has 2 options (on, off)
if headphones cannot be detect on this target, or 3 options (on, off, auto)
if we can detect headphones. This will break the old setting on target that
cannot detect jack but it makes the code more uniform and avoid maintaining
two settings with more #ifdef. The third option (auto) uses the LANG_AUTO
text, which I think is clear enough (disable speaker on jack plug).
In order to avoid code duplication (both in apps and firmware), I decided to
keep the audiohw_enable_speaker function as-is: it takes a boolean and doesn't
care about the speaker policy. I introduced a new audio_enable_speaker that
takes directly the mode (which follows the setting encoding): 0=off, 1=on
and 2=auto. This way one calls audio_enable_speaker and it changes the speaker
once to reflect the request mode. The apps code then uses this function in the
places where it makes sense: on setting load, setting change and jack (un)plug
event.

Change-Id: I027873f698eb4bc365d7c02b515297806355d9e2