rockbox/apps/recorder, branch wolf3d

Handle SYS_POWEROFF event in recorder and chessbox plugins

2018-12-23T23:01:54+00:00

Credit to Igor Poretsky

Change-Id: I151d3511b9cee269190d87df7fa7dd355aaafc9b

Auto-Ranging Time Formatting For Menus (hh:mm:ss:mss)

2018-12-22T18:27:21+00:00

Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'

Time is auto-ranged dependent on value

Adds talk_time_intervals to allow time values to be spoken similar to
display format:  x Hours, x Minutes, x Seconds, x Milliseconds

Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile

RTL Languages ARE supported

Negative values ARE supported

Backlight on/off are now Always and Never to share formatter with LCD
Timeout

Added flag to allow ranged units to be locked to a minimum index

Added flag to allow leading zero to be supressed from the largest unit

merged talk_time_unit() and talk_time_intervals()

optimized time_split()

optimized format_time_auto()

Backlight time-out list same as original

Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd

Fix possible truncation misc.c->output_dyn_value + use Kibytes

2018-12-10T04:54:55+00:00

output_dyn_value now requires the count for number of units

Binary scale now shows Kibibytes instead of kilobytes (g#1742)

Fixes output for negative values as well

Change-Id: I8aa896860e97d2453fa35069e2dfe1caac60109f

Decrease static code size recording.c

2018-12-09T00:05:13+00:00

Forgot static for recording_step_levels()

There is no need to re-calculate split_time or split_bytes each loop
you can't change them within recording screen --  these become constants

We don't need longs to store the conversion of minutes to seconds
or MB to bytes these are now shorts and the conversion takes place within
rec_timesplit_seconds() and rec_sizesplit_bytes() respectively

Change-Id: Ie1514085e92e00e67eb1942c0f4f8820714587e9

Fix truncation warning recording.c->recording_screen

2018-12-08T22:03:47+00:00

Limit buf2 to enough characters(16) to display signed int & label

consolidate gain/volume settings

Change-Id: I9ef6aa1e16ea2a17acc311a9b7e1c0556f58eff7

Agptek Rocker: Initial commit

2018-06-12T08:31:14+00:00

Change-Id: I26b51106c7b1c36a603fba6d521e917d79b5a95b

Undo hacks to meant to get around string formatting limitations

2017-11-21T10:01:14+00:00

The new vuprintf makes unnecessary workarounds due to formatting
limitations. I checked grep output for whatever appeared to fit
but it's possible I missed some instances because they weren't
so obvious.

Also, this means sound settings can dynamically work with any
number of decimals rather than the current assumption of one or
two. Add an ipow() function to help and take advantage of dynamic
field width and precision. Consolidate string formatting of sound
settings.

Change-Id: I46caf534859dfd1916cd440cd25e5206b192fcd8

Fix dangerous casts

2017-02-04T16:24:47+00:00

On Windows 64-bit, the size of long is 32-bit, thus any pointer to long cast is
not valid. In any case, one should use intptr_t and ptrdiff_t when casting
to integers. This commit attempts to fix all instances reported by GCC.
When relevant, I replaced code by the macros PTR_ADD, ALIGN_UP from system.h

Change-Id: I2273b0e8465d3c4689824717ed5afa5ed238a2dc

Implement speaker enable/disable on jack (un)plug

2017-02-04T16:22:08+00:00

The implementation is not very complicated but there are a few things worth
noting. There was a previous "speaker enable" setting but it was a boolean.
I decided to replace it with a choice setting that has 2 options (on, off)
if headphones cannot be detect on this target, or 3 options (on, off, auto)
if we can detect headphones. This will break the old setting on target that
cannot detect jack but it makes the code more uniform and avoid maintaining
two settings with more #ifdef. The third option (auto) uses the LANG_AUTO
text, which I think is clear enough (disable speaker on jack plug).
In order to avoid code duplication (both in apps and firmware), I decided to
keep the audiohw_enable_speaker function as-is: it takes a boolean and doesn't
care about the speaker policy. I introduced a new audio_enable_speaker that
takes directly the mode (which follows the setting encoding): 0=off, 1=on
and 2=auto. This way one calls audio_enable_speaker and it changes the speaker
once to reflect the request mode. The apps code then uses this function in the
places where it makes sense: on setting load, setting change and jack (un)plug
event.

Change-Id: I027873f698eb4bc365d7c02b515297806355d9e2

Fix FS#12981 JPEG decoding problem when entropy data starts with FF

2016-04-01T17:29:41+00:00

This changes JPEG fill and invalid byte handling to be like
mozjpeg, and bases entropy data start on SOS marker location.

Thanks to Stefan Waldmann and Dean Tersigni for reporting.

Change-Id: I3c79cc6ac8d714fdc75c12b57ba427d611c99519
Chaange-Id: Ibc7c17d38d5be63642bdaf6adfd6acc2a6cf4450