Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'

Time is auto-ranged dependent on value

Adds talk_time_intervals to allow time values to be spoken similar to
display format:  x Hours, x Minutes, x Seconds, x Milliseconds

Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile

RTL Languages ARE supported

Negative values ARE supported

Backlight on/off are now Always and Never to share formatter with LCD
Timeout

Added flag to allow ranged units to be locked to a minimum index

Added flag to allow leading zero to be supressed from the largest unit

merged talk_time_unit() and talk_time_intervals()

optimized time_split()

optimized format_time_auto()

Backlight time-out list same as original

Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd

Selective backlight allows the user to choose actions that will not
enable the backlight when pressed.

Advanced softlock allows user to choose actions that  will not be
blocked by screenlock on devices without a hold button.

Both only occur in FM and WPS Contexts.

Update:
Back from the dead
-Cleaned up code, removed unnecessary calls, re-arranged last filter action
  timeout conditional to work in case last_filtered_action_tick was never set
-Added entries to the manual
-Fixed back button on some menus not activating backlight
-Made menus more intuitive, no actions selected now changes menu item to off.
-Added talk fuctionality.
-Added option to disable selective backlight while on external power.
-Rewrote backlight and softlock handling code to fix issue with scrollwheels
-Menu changed to have toggle(yes/no) and settings
-Optimized selective actions lookup
-Added option to disable notification of 'buttons locked' while softlocked
-Removed uneeded code, consolidated action lookup to single function
-Fixed incorrect name on selective softlock menu
-Added option to disable touch on touchscreen devices
-Fixed backlight on original screenlock without selective screenlock active
-Added text selection in mask_select for when show_icons is off
-Fixed voice in mask_select to speak if voice is defined instead of spelling
-Added more lang defines (play skip seek)
-Added option to disable unknown keys turning on backlight
-Fixed Conditional argument In wrong place causing players without
	backlight to fail to build
-Fixed Disable Unknown blocking detection of context change
-Fixed canceling menu didn't update new settings
-Added Autolock on backlight off
-Removed backlight_on_force from backlight.c, Now sets ignore next to false
	and uses backlight_on
-Cleaned up autolock code added strings to lang file
-Fixed issue where rapid presses would bypass softlock
-Removed old softlock code, Cleaned selective actions code
-Changed menu to match existing RB menus
-Fixed Backlight_on_Hold blocked by backlight_ignore_next
-Fixed ignore_next for ipod
-Fixed bug allowing context with softlock to bypass selective backlight
-Changed mask_select to no longer prompt for changes to be saved
-Changed menu names
-Added ignore timeout to allow ipod scroll wheel to work properly and other
 players to still work properly, removed some previous code including
 ignore_event
-Increased ignore timeout to prevent sd card accesses from interrupting action
 code and turning on backlight
-Changed Unknown action to unmapped action in menu, changed handling code
-Removed unneeded logic and variables for handling unfiltered actions
-Reverted unmapped action code to previous functionality
-Added manual entries (thanks JohnB)
-Removed elusive unhandled unicode character from manual, changed formatting slightly

Actions:
Volume,Play,Seek,Skip

Extras:
Disable unmapped actions
Disable selective backlight on external power
Disable touch during softlock on touchscreen devices
Disable softlock notifications (power button still notifies)
Autolock on backlight off

Method:
Adds a function to ignore backlight on next call
 If selected action occurs backlight is forced on,
 Filter_first_keypress stays intact.

Selective softlock allows selected actions through, bypasses the normal
 softlock routine.

ToDo:
DONE

previous commit (#1) has attribution for folder_select.c which mask_select
is based from.

Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4

This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.

Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.

To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.

Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:

* Codecs not able to use an offset such as VGM or other atomic
formats

* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet

The change re-versions pretty much everything from tagcache to nvram.

Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>

Instead of 3 cfg lines per eq band there is now a single line
for each:
<config name>: <cutoff/center freq>, <q>, <gain>

In addition, the config value names make a bit more sense.

The old settings are still readable but config.cfg and any new
settings files will be written with the new config values. (The
old settings will be removed completly sometime after the next
stable release).

Also a slight rework of the advanced EQ menu UI

Change-Id: I9008658d36ded442a5f2f825916df42a3934cbef
Reviewed-on: http://gerrit.rockbox.org/394
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>

As well as using an index, which breaks when a file is added or
removed, use the crc32 of the filename. When the crc32 check passes the
index is used directly. When it fails, the slow path is taken checking
each file name in the playlist until the right crc is found. If that fails
the playlist is started from the beginning.

See http://www.rockbox.org/tracker/6411

Bump plugin API and nvram version numbers

Change-Id: I156f61a9f1ac428b4a682bc680379cb6b60b1b10
Reviewed-on: http://gerrit.rockbox.org/372
Tested-by: Jonathan Gordon <rockbox@jdgordon.info>
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22440 a1c6a512-1295-4272-9138-f99709370657

Allows almost every available setting. (change the options in settings > general settings > quickscreen items)
Not every setting will work perfectly, some might need aditional handling if the change doesnt take effect straight away (let us know which are problematic so they can be fixed)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18984 a1c6a512-1295-4272-9138-f99709370657

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18983 a1c6a512-1295-4272-9138-f99709370657

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18882 a1c6a512-1295-4272-9138-f99709370657

runtimes, resume info, etc will be reset again...


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18561 a1c6a512-1295-4272-9138-f99709370657