Plan:
-----

A simple racing game like Pole Position or Enduro.

Status:
-------
 - Currently generates a random road and scrolls through it
 - Random road generation (curves and hills)
 - Supports loading of maps from a file ("/output.xrm")
 - Sample map at http://a.pomf.se/ynhlwq.xrm

Todo:
-----
 - Convert to fixed-point math in all places (only one place left!)
 - Improve/fix track looping
 - Improve random road generation to start and end at the same height
 - Finish sprite code
 - Make sprites
 - Game-ify!

What's new:
-----------
 - NEW: uses greylib on low-depth targets!
 - Loadable maps implemented, UNTESTED!
 - Sprites in progress (see render() in graphics.c)

Change-Id: Ia2ff60b3c43d9f2e3a4f63e0ad90d2cb571c605e

- square sine tick and tock sounds (more annoying, more useful;-)
- optical indication of tics on display
- unification of mode of operation for SWCODEC and HWCODEC (tested on simulator)
  Both playback and display drawing happen in main loop, always.
- operating in two modes now:
-- 1. classic dumb metronome
--- active when openened as application without file to open
--- the usual functionality with tapping and bpm change
--- controls indicated on display
-- 2. track mode with programmable series of parts
--- active when started as viewer for a .tempo file
--- differing meters (4/4, 3/4, 6/8, etc.)
--- patterns (tick/tock/silence on each beat)
--- smooth tempo changes in those tracks

This version had lots of testing regarding metronome accuracy,
resulting in the realization that PLL A and PLL B differ
on the Clip+, causing drift. There is still drift when the timer
intervall is too small, so I settled on 2 ms as compromise.

This is the final version, after adding documentation and extensive
help from Sebastian Leonhardt testing it on slower hardware (YH820),
where it works up to 650 actual bpm with display indication.

Latest change: Documentation nitpicks.

Change-Id: I764c8252526db188352385c5462f9453d882beb9

Depends on http://gerrit.rockbox.org/r/#/c/1043/.

This patch adds a new setting in Settings -> General -> System: USB Mode.

Usable in Quickscreen and Shortcuts.

Possible settings are:
- Mass Storage: The default, on USB connect export the internal and external
drives as usual. Rockbox will exit gracefully in this case, since the internal
drive (/mnt/sdcard) is exported as mass storage device and Android prevents
Rockbox from continued execution.
- Charge Only: USB charge only, do not export the internal and external drives.
This will not close Rockbox.
- ADB: Enable the Android Debug Bridge. This will not close Rockbox.

Charge only and ADB are actually the same, since it is not yet established if
charge only is doable without adb and major hooks into Android.

German translation provided.

This may be genric for Android based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.

Change-Id: I616247c29946c6595ebcf8f0c14b2410c9f0498b

Depends on http://gerrit.rockbox.org/r/#/c/1043/.

This patch adds a new setting in Settings -> General
-> System: Freq Scaling Governor

Usable in Quickscreen and Shortcuts.

Possible settings are:
- Conservative: Slow frequency switching.
- Ondemand or Interactive: Fast frequency switching.
- Powersave: Allways lowest frequency.
- Performance: Allways highest frequency.

German translation provided.

This may be genric for Android kernel based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.

Change-Id: I10296f5be9586ad3a409105db0cd03682a30e9c1

Reorganization

- Separated iBasso devices from PLATFORM_ANDROID. These are now standlone
  hosted targets. Most device specific code is in the
  firmware/target/hosted/ibasso directory.
- No dependency on Android SDK, only the Android NDK is needed.
  32 bit Android NDK and Android API Level 16.
- Separate implementation for each device where feasible.

Code cleanup

- Rewrite of existing code, from simple reformat to complete reimplementation.
- New backlight interface, seperating backlight from touchscreen.
- Rewrite of device button handler, removing unneeded code and fixing memory
  leaks.
- New Debug messages interface logging to Android adb logcat (DEBUGF, panicf,
  logf).
- Rewrite of lcd device handler, removing unneeded code and fixing memory leaks.
- Rewrite of audiohw device handler/pcm interface, removing unneeded code and
  fixing memory leaks, enabling 44.1/48kHz pthreaded playback.
- Rewrite of power and powermng, proper shutdown, using batterylog results
  (see http://gerrit.rockbox.org/r/#/c/1047/).
- Rewrite of configure (Android NDK) and device specific config.
- Rewrite of the Android NDK specific Makefile.

Misc

- All plugins/games/demos activated.
- Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa.

Includes

- http://gerrit.rockbox.org/r/#/c/993/
- http://gerrit.rockbox.org/r/#/c/1010/
- http://gerrit.rockbox.org/r/#/c/1035/

Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight
interface and new option for hold switch, touchscreen, physical button
interaction.

Rockbox needs the iBasso DX50/DX90 loader for startup, see
http://gerrit.rockbox.org/r/#/c/1099/

The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If
/mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit
gracefully and the loader will restart Rockbox on USB disconnect.

Tested on iBasso DX50.
Compiled (not tested) for iBasso DX90.
Compiled (not tested) for PLATFORM_ANDROID.

Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7

System -> Debug (Keep Out) -> View CPU stats

Will now show the current cpufreq scaling governor, minimum, current and
maximum cpufreq scaling frequency for each CPU.

This may be genric for Android kernel based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.

Change-Id: I53e212f8707bf2abaa557e297293fb559ac37058

perceptual bass enhancement
- a bbe-ish group delay corrction with Biophonic EQ boost.
- precut

auditory fatigue reduction
-reduce signal in frequency that may trigger temporary threshold shift

haas surround
-frequency between f(x1) and f(x2) is always bypassed.
-can apply to side only.

Change-Id: Icb6355ce9b1c99bf2c58c9385c3c411c0ae209d3

Change-Id: Ie01251af2cd843979b5fdefcfa541ba377d13bd7

_remote_backlight_* and _buttonlight_* are cleaned as well

Change-Id: I73653752831bbe170c26ba95d3bc04c2e3a5cf30

Change-Id: I30219d626316776eb73b4205d63376fa3dbc6361