rockbox/firmware/SOURCES, branch puzzles My Rockbox tree iPod Classic: NOR support for bootloader 2016-08-18T22:15:59+00:00 Cástor Muñoz cmvidal@gmail.com 2016-02-04T23:49:33+00:00 7083110f8154f6ca47845fc747bad5062515658c - NOR driver (based on emCORE) - read/write IM3 images - read 'flsh' files Change-Id: Ie0654e0d298affc0f47ed64b823767118bd1aa3f 
- NOR driver (based on emCORE)
- read/write IM3 images
- read 'flsh' files

Change-Id: Ie0654e0d298affc0f47ed64b823767118bd1aa3f
iPod Classic: hardware AES and SHA1 for bootloader 2016-08-18T22:15:44+00:00 Cástor Muñoz cmvidal@gmail.com 2016-02-04T23:50:53+00:00 bf89c757ddee815ebdd42bba91413daa96d50b75 Based on emCORE. Low level functions that do not depend on Rockbox kernel, intended to be used by the bootloader, dualboot-installer, RB drivers or other .dfu tools. Change-Id: I3c616ded42260c6626bda23b7e580791981df61d 
Based on emCORE.

Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.

Change-Id: I3c616ded42260c6626bda23b7e580791981df61d
iPod Classic: SPI driver for bootloader 2016-08-18T22:15:36+00:00 Cástor Muñoz cmvidal@gmail.com 2016-02-04T23:48:03+00:00 57a44854e30e5a6b082b3816c0ca0ff83240474f Based on emCORE. Low level functions that do not depend on Rockbox kernel, intended to be used by the bootloader, dualboot-installer, RB drivers or other .dfu tools. Change-Id: Iad369627b55bf1778eab437424072f1a653e4db6 
Based on emCORE.

Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.

Change-Id: Iad369627b55bf1778eab437424072f1a653e4db6
iPod Nano 2G: use the new USB DesignWare driver 2016-08-02T02:57:50+00:00 Cástor Muñoz cmvidal@gmail.com 2016-07-31T01:48:11+00:00 ef572fec523c3064cbec8df3ef7610a2a9b5df54 Change-Id: I8d1561bf4e239b55617a8d5075457a668e0c312c 
Change-Id: I8d1561bf4e239b55617a8d5075457a668e0c312c
iPod Classic: use the new USB DesignWare driver 2016-08-02T02:57:50+00:00 Cástor Muñoz cmvidal@gmail.com 2016-07-31T01:40:32+00:00 3c5aa754de9c9e572232b469398a981dccfff127 Change-Id: I36aabb5cb9cfe2d8c4f8fbcea944efec58ef9671 
Change-Id: I36aabb5cb9cfe2d8c4f8fbcea944efec58ef9671
Introduce new USB driver for Synopsys DesignWare USB OTG core. 2016-08-02T02:57:49+00:00 Cástor Muñoz cmvidal@gmail.com 2016-07-31T01:00:43+00:00 5e305d35c94199241f71a994cf6a691aec49688c Based on g#844 and g#949, it is intended as a replacement for the current s3c6400x USB driver. The DesignWare USB OTG core is integrated into many SoC's, however HW core version and capabilities (mainly DMA mode, Tx FIFO mode, FIFO size and number of available IN/OUT endpoins) may differ: CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT -------- ------------- ------ --- --------- ------- ------- as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4 sansaclipv2 sansaclipzip sansafuzev2 s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5 s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7 ipodnano3g s5l8720 ipodnano4g ? ? ? ? ? Functionality supported by this driver: - Device mode, compatible with USB 1.1/2.0 hosts. - Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs. - No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode. - Concurrent transfers: control, bulk (usb_storage, usb_serial) and interrupt (usb_hid). Actually this driver is not used by any CPU, it will be enabled for each individual CPU/target in next patches. Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f 
Based on g#844 and g#949, it is intended as a replacement for the
current s3c6400x USB driver.

The DesignWare USB OTG core is integrated into many SoC's, however
HW core version and capabilities (mainly DMA mode, Tx FIFO mode,
FIFO size and number of available IN/OUT endpoins) may differ:

CPU       targets        HW ver  DMA  NPTX FIFO  FIFO sz  #IN/OUT
--------  -------------  ------  ---  ---------  -------  -------
as3525v2  sansaclipplus  2.60a   Yes  Dedicated  0x535    4/4
          sansaclipv2
          sansaclipzip
          sansafuzev2
s5l8701   ipodnano2g     2.20a   Yes  Shared     0x500    4/5
s5l8702   ipod6g         2.60a   Yes  Dedicated  0x820    7/7
          ipodnano3g
s5l8720   ipodnano4g     ?       ?    ?          ?        ?

Functionality supported by this driver:
- Device mode, compatible with USB 1.1/2.0 hosts.
- Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs.
- No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode.
- Concurrent transfers: control, bulk (usb_storage, usb_serial) and
  interrupt (usb_hid).

Actually this driver is not used by any CPU, it will be enabled for
each individual CPU/target in next patches.

Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f
zenxfi3: rewrite mpr121 driver 2016-06-01T21:09:27+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-05-30T15:24:38+00:00 d42a4a4eb4bc20fda41543b8b831c1970723346f The new driver uses an asynchronous architecture for touch status reading. Change-Id: Ic75a8b91bc47ee16c3af873afde178cd70186376 
The new driver uses an asynchronous architecture for touch status reading.

Change-Id: Ic75a8b91bc47ee16c3af873afde178cd70186376
fuze+: rewrite touchpad driver 2016-06-01T21:08:17+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-05-02T21:01:22+00:00 b2afd931e2d83ce346811a68a34ee56c48be6d35 The old driver was bad in many respect, it had some race conditions, it was using a thread to serialize transfers because of the legacy i2c interface. It also had huge latency (typically 50ms but delays up to 300ms can happen), thus some presses were missed. The new driver takes advantage of the new i2c driver to do everything asynchronously. It also does not need a thread anymore because queueing ensures proper serialization. It provides much better and reliable latency (typically ~2ms). Also fix the debug screen which was horribly broken. The new screen also displays the deadzones. Change-Id: I69b7f99b75053e6b1d3d56beb4453c004fd2076e 
The old driver was bad in many respect, it had some race conditions, it was
using a thread to serialize transfers because of the legacy i2c interface.
It also had huge latency (typically 50ms but delays up to 300ms can happen),
thus some presses were missed.
The new driver takes advantage of the new i2c driver to do everything
asynchronously. It also does not need a thread anymore because queueing
ensures proper serialization. It provides much better and reliable latency
(typically ~2ms).
Also fix the debug screen which was horribly broken. The new screen also
displays the deadzones.

Change-Id: I69b7f99b75053e6b1d3d56beb4453c004fd2076e
iPod Classic: piezo support for bootloader 2016-05-25T08:59:44+00:00 Cástor Muñoz cmvidal@gmail.com 2016-02-05T00:12:02+00:00 e863f9a0ce8d968b085252c3b093b17ca07b65dd Low level functions that do not depend on Rockbox kernel, intended to be used by the bootloader, dualboot-installer, RB drivers or other .dfu tools. Change-Id: If80214d26e505265ace19d9704f1e1300f98b2f4 
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.

Change-Id: If80214d26e505265ace19d9704f1e1300f98b2f4
iPod Nano2G: add HAVE_SERIAL 2016-05-13T21:23:35+00:00 Cástor Muñoz cmvidal@gmail.com 2016-05-12T01:16:27+00:00 d405026ca8bc4c63d8fcd5d63cef02341182774b Change-Id: I46dca69c6708d3e6189f66e70badf0a594bac00b 
Change-Id: I46dca69c6708d3e6189f66e70badf0a594bac00b