rockbox/firmware/export/adc.h, branch master

adc-target.h: cleanup

2012-01-08T00:39:29+00:00

move adc_close() prototype to adc.h
don't duplicate prototypes of adc.h
remove license header and guards for a single include of another file or for empty content

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31623 a1c6a512-1295-4272-9138-f99709370657

FS#10756 - Free unused init code

2010-03-03T23:20:32+00:00

Introduce a new .init section for initialisation code, so that it can be copied to an area which is later overwritten before calling. The stack/bss can then overwrite that code, effectively freeing the code size that the initialisation routines need. Gives a few kB ram usage back.
Only implemented for PP and as3525 so far. More targets could be added, as well as more functions.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25013 a1c6a512-1295-4272-9138-f99709370657

Updated our source code header to explicitly mention that we are GPL v2 or

2008-06-28T18:10:04+00:00

later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657

Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.

2008-03-17T23:47:38+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657

Moved SH1 ADC to target tree.

2007-04-15T23:35:56+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657

Target tree support for Iriver iFP.

2006-11-09T22:58:35+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11485 a1c6a512-1295-4272-9138-f99709370657

move the iriver h1x0/h3x0 targets to the target tree

2006-10-30T08:56:06+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657

Put a couple x5-specific function declarations in adc-target.h where they should be.

2006-10-27T08:12:18+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11358 a1c6a512-1295-4272-9138-f99709370657

Stop reading buttons if one is not down. Don't read remote keys if not plugged. Good for another few points of boost and 4fps full-screen unboosted. The button scan enabling seems stable and I've been using it without any difficulties but if the interrupts hiccup it could leave them unresponsive. Clearing the GPI0 interrupts before enabling them seems to prevent any difficulties. If there's problems there I'll just leave the remote reading bypass only and 50% of the benefits will still be realized.

2006-10-27T05:31:28+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11357 a1c6a512-1295-4272-9138-f99709370657

Move all iPod targets into the target tree. FS#5890

2006-10-05T10:58:51+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657