rockbox/firmware/export/config-c200v2.h, branch master

Rename targets to be consistent in all places. (FS #10819). Take 2.

2009-12-07T12:19:08+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23883 a1c6a512-1295-4272-9138-f99709370657

Introduce new config header 'config-sim.h' that takes care of undefining things that shouldn't be defined for sims so that the target configs no longer need to have #ifndef SIMULATOR sections and to bring some consistency for what is and is not included for sims.

2009-11-07T10:48:05+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23547 a1c6a512-1295-4272-9138-f99709370657

Sansa AMS recording support (Microphone and FM)

2009-11-01T22:51:31+00:00

Still disabled on all targets:
- Fuze and e200v2 see spurious interrupts with no source defined
- Clip/m200v4 deadlock instantly when starting recording (perhaps due to low memory size)

Having the code in SVN will make working on this feature easier

Also add keymaps for Fuze, and correct Frequency section of recording
options : the 22.05kHz limitation of e200v1 and c200v1 doesn't apply to
Sansa AMS (different I2S hardware, unrelated to as3514)

Flyspray: FS#10371
Authors: Fred Bauer and myself

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23476 a1c6a512-1295-4272-9138-f99709370657

move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )

2009-09-06T17:12:09+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22644 a1c6a512-1295-4272-9138-f99709370657

adapt c200v2 and view defines to the new drive/volume handling scheme

2009-07-18T13:18:48+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21955 a1c6a512-1295-4272-9138-f99709370657

Samsa: fix red for clip/m200v4/c200v2 (typo)

2009-07-06T14:24:22+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21691 a1c6a512-1295-4272-9138-f99709370657

Samsa AMS: start of an USB driver (nothing working atm)

2009-07-06T13:54:51+00:00

Work based on AMD 5536 linux driver and AMD Geode CS5536 datasheet
Rockbox still doesn't reboot on USB insert

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21689 a1c6a512-1295-4272-9138-f99709370657

Sansa c200v2 : support more hardware

2009-06-18T15:05:59+00:00

Don't read the buttons from GPIOC but from DBOP_DIN (all directional buttons + select)
Still missing hold, rec, volume up and volume down
Read microsd
Tuner is a si4700 but seems to suffer from the same problem than e200v2
Sound works

TODO: missing buttons, lcd yuv, test lcd performance (the c200v1 lcd performance has decreased since r21321 : needs to be investigated)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21330 a1c6a512-1295-4272-9138-f99709370657

Sansa c200v2 : lcd & backlight support, using the c200v1 lcd driver

2009-06-17T19:55:27+00:00

The LCD driver is unified and lcd_send_command now takes 2 arguments : the command and its argument.
    If there is no argument, it's set to 0 and a NOP command is issued
    If there is more than one argument (set X/Y address), the 2nd argument is sent as a 2nd command, and a NOP command is issued after it.
    Benefit : c200v2 transfers the command and the argument in one 16 bits transfer
    Performance should not be affected since commands without argument are only used in lcd_init() and lcd_enable()

lcd_send_data() now transfers whole lines (or columns) instead of single pixels
yuv is disabled for c200v2 for now

Some buttons can be read, including left button (bit 6 of DBOP_DIN), but for some reason they have no effect in rockbox: to be investigated

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21321 a1c6a512-1295-4272-9138-f99709370657

Sansa AMS: move OF size declaration in model specific config

2009-05-21T11:46:52+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21008 a1c6a512-1295-4272-9138-f99709370657