rockbox/firmware/export/config/android.h, branch working

storage: Add STORAGE_HOSTFS

2014-02-23T19:23:51+00:00

CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).

SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).

Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292

Use RGB565 define instead of plain 565.

2012-06-19T23:13:51+00:00

Pixelformats should always use the defines, not the raw values.

Change-Id: Id60a73385bb6cc4e8f8d1f8b292489d066f1e13f

Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL

2012-05-09T12:32:38+00:00

Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius

TARGET_TREE is not needed anymore

2012-01-07T17:14:40+00:00

spotted by jhMikeS

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31597 a1c6a512-1295-4272-9138-f99709370657

Rework powermgmt to enable code re-use on appliation and sims.

2012-01-03T23:44:38+00:00

* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.

* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,

* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657

Android: implement headphone detection thus enabling pause on unplug (FS#12097).

2011-06-04T19:17:47+00:00

Listen to headphone plug events. There are currently two glitches with this:
- Android takes a while until it reports the unplug event, so there will be
  some delay until playback gets paused. This is an Android limitation.
- Rockbox debounces headphone state changes for one second. Therefore playback
  will shortly be routed to the speaker on unplug until Rockbox does the actual
  pause.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29956 a1c6a512-1295-4272-9138-f99709370657

Listen to and follow external Android volume changes. (Based on FS#11914 by Maurus Cuelenaere)

2011-03-14T12:25:48+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29586 a1c6a512-1295-4272-9138-f99709370657

Enable volume keys in Android.

2011-03-10T22:53:58+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29559 a1c6a512-1295-4272-9138-f99709370657

RaaA: Add RTC support

2011-03-08T20:54:42+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29544 a1c6a512-1295-4272-9138-f99709370657

Enable hotkey on all the touchscreen targets

2011-03-02T10:45:41+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29497 a1c6a512-1295-4272-9138-f99709370657