rockbox/firmware/export/config/sansae200.h, branch master

Get rid of USE_ROCKBOX_USB

2015-01-08T15:07:12+00:00

Except for unfinished or experimental ports, it isthe case that
USE_ROCKBOX_USB and HAVE_USBSTACK are both defined or both undefined.
Furthermore, it is a leftover of some early developments on the USB stack and
doesn't make sense anymore.

Change-Id: Ic87a865b6bb4c7c9a8d45d1f0bb0f2fb536b8cad
Reviewed-on: http://gerrit.rockbox.org/1091
Reviewed-by: Amaury Pouly

Implement lcd_get_dpi() for all bitmap targets.

2014-03-03T14:14:15+00:00

DPI values are autogenerated from the resolution and collected display size
values. These values are inserted as comments as well.

Change-Id: Id03aedf9af18348f773dfce002805e480f6751e8

Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL

2012-05-09T12:32:38+00:00

Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius

TARGET_TREE is not needed anymore

2012-01-07T17:14:40+00:00

spotted by jhMikeS

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31597 a1c6a512-1295-4272-9138-f99709370657

Rework powermgmt to enable code re-use on appliation and sims.

2012-01-03T23:44:38+00:00

* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.

* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,

* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657

Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.

2011-11-11T19:40:32+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30967 a1c6a512-1295-4272-9138-f99709370657

e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.

2011-01-16T01:40:15+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29062 a1c6a512-1295-4272-9138-f99709370657

AB_REPEAT_ENABLE was never defined to 2

2010-07-18T18:13:53+00:00

There's only 2 possibilities: defined or undefined

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27483 a1c6a512-1295-4272-9138-f99709370657

e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.

2010-06-26T10:07:17+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27139 a1c6a512-1295-4272-9138-f99709370657

FS#11081 - Hotkey patch. Many targets supported, but some keymaps need work before they can be switched on

2010-04-01T03:14:44+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25414 a1c6a512-1295-4272-9138-f99709370657