rockbox/firmware/export/pcf50606.h, branch master

D2: Use a common function for reading ADC values from the PMU

2009-10-08T15:47:43+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23007 a1c6a512-1295-4272-9138-f99709370657

Re-work D2 power off behaviour.

2009-07-26T19:41:24+00:00

* Inhibit PCF timeout during shutdown and while charging
* Power off the player using the same mechanism as the OF (GPIO)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22056 a1c6a512-1295-4272-9138-f99709370657

Updated our source code header to explicitly mention that we are GPL v2 or

2008-06-28T18:10:04+00:00

later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657

Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.

2008-04-04T20:24:08+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16966 a1c6a512-1295-4272-9138-f99709370657

Some more M5 adjustments.

2007-03-05T01:31:26+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12616 a1c6a512-1295-4272-9138-f99709370657

FS#4770 - Add USB charging for the H300 series

2007-02-01T10:47:22+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12169 a1c6a512-1295-4272-9138-f99709370657

Moved pcf50606 stuff to target directory.

2006-10-25T23:24:07+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11348 a1c6a512-1295-4272-9138-f99709370657

eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom

2006-08-15T22:54:06+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10597 a1c6a512-1295-4272-9138-f99709370657

H300: Optimised PCF50606 driver, significantly reduces CPU power drain from the button tick (with both main & remote buttons: 50%->13% at 11MHz, 12%->6% at 45MHz): * Delay is adapted to the current CPU clock, aiming at constant 400kHz i2c clock. * Reduced number of port accesses (accessing GPIO is very slow, especially with the atomic boolean instructions) by implementing an open-collector-like behaviour. * Time-critical functions implemented in assembler.

2006-04-16T23:16:32+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9693 a1c6a512-1295-4272-9138-f99709370657

Not only H300 has a PCF50606

2006-02-21T21:33:27+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8768 a1c6a512-1295-4272-9138-f99709370657