rockbox/firmware/export/pp5002.h, branch working

Revise the PCM callback system after adding multichannel audio.

2012-03-03T06:23:38+00:00

Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording  uses "void **addr".
"const" is put in place throughout where appropriate.

Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.

Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

Move CACHEALIGN_BITS to cpu headers

2010-04-13T15:50:08+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25633 a1c6a512-1295-4272-9138-f99709370657

Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.

2009-10-19T21:38:52+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23277 a1c6a512-1295-4272-9138-f99709370657

Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h

2009-06-29T14:30:12+00:00

Note : SH has TIMER_FREQ defined to CPU_FREQ, so any code wanting it must include #config.h before #cpu.h

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21560 a1c6a512-1295-4272-9138-f99709370657

Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.

2008-12-12T11:01:07+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19400 a1c6a512-1295-4272-9138-f99709370657

Updated our source code header to explicitly mention that we are GPL v2 or

2008-06-28T18:10:04+00:00

later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657

Rename CPU/COP_INT_CLR to CPU/COP_INT_DIS since it's really a 'write one to disable' register and hasn't anything to do with acknowledging interrupts-- that's handled at the module level.

2008-06-03T05:08:24+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17683 a1c6a512-1295-4272-9138-f99709370657

Fix the PP5002 interrupt controller register definitions. The PP5002 interrupt controller matches the first half of the PP502x interrupt controller (the actual interrupt bits are different though).

2008-04-03T21:48:41+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16956 a1c6a512-1295-4272-9138-f99709370657

Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.

2007-11-27T01:20:26+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15827 a1c6a512-1295-4272-9138-f99709370657

Show exact CPU version on PP5002 targets.

2007-11-03T08:09:07+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15427 a1c6a512-1295-4272-9138-f99709370657