rockbox/firmware/export/tcc77x.h, branch master

Define CACHEALIGN_BITS for missing ARM CPUs for later use.

2010-11-19T07:17:20+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28619 a1c6a512-1295-4272-9138-f99709370657

TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC).

2009-08-12T19:26:04+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22284 a1c6a512-1295-4272-9138-f99709370657

Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h

2009-06-29T14:30:12+00:00

Note : SH has TIMER_FREQ defined to CPU_FREQ, so any code wanting it must include #config.h before #cpu.h

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21560 a1c6a512-1295-4272-9138-f99709370657

A few tweaks to get USB support compiling again on TCC targets (part of FS#9917 by Michaël Burtin).

2009-03-09T22:02:30+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20264 a1c6a512-1295-4272-9138-f99709370657

Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.

2008-09-06T17:50:59+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657

Make the TCC780x NAND driver also build for 77x targets. This is work-in-progress stuff and does not yet work fully on 77x, but it's a step in the right direction. Also replace some magic numbers with #defines.

2008-07-12T23:01:49+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18019 a1c6a512-1295-4272-9138-f99709370657

Updated our source code header to explicitly mention that we are GPL v2 or

2008-06-28T18:10:04+00:00

later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657

Convert the TCC77x ADC driver to use interrupts - based on the technique used in the SH ADC driver.

2008-05-03T07:49:39+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17311 a1c6a512-1295-4272-9138-f99709370657

Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.

2008-05-02T19:12:09+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657

Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.

2007-10-28T11:08:10+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657