rockbox/firmware/export, branch wolf3d My Rockbox tree Fix red and remove duplicated function declaration 2019-02-07T23:04:20+00:00 Sebastian Leonhardt sebastian.leonhardt@web.de 2019-02-07T22:31:38+00:00 26e0c64e34f05d3869a7e5e26d7dd388888fa72e Change-Id: I5fed7fdad077eedfc1e36fbd9e1669f11b90288d 
Change-Id: I5fed7fdad077eedfc1e36fbd9e1669f11b90288d
Add YH820 current usage for runtime estimation 2019-02-07T22:07:19+00:00 Sebastian Leonhardt sebastian.leonhardt@web.de 2016-05-02T21:46:37+00:00 e662ae4e9e6feb754a909691847e76544282f319 Change-Id: If50d7e6db3077853dfba438d9765cdb3513f2910 
Change-Id: If50d7e6db3077853dfba438d9765cdb3513f2910
Fix lcd not waking up when backlight is always off 2019-02-07T21:10:52+00:00 Sebastian Leonhardt sebastian.leonhardt@web.de 2016-06-28T00:05:25+00:00 287685932e53849192020092bce7d7a21d9e2a71 This patch is relevant for targets with a transflective display. If the backlight was set to "always off" (e.g. to use the lcd in a pure passive way), and the sleep timer ran off, the LCD would stay disabled and didn't wake up when a button is pressed. Change-Id: I0a157c7f421d9fc4c7d8ba903f2cf93f6cef51d0 
This patch is relevant for targets with a transflective display.
If the backlight was set to "always off" (e.g. to use the lcd
in a pure passive way), and the sleep timer ran off, the LCD
would stay disabled and didn't wake up when a button is pressed.

Change-Id: I0a157c7f421d9fc4c7d8ba903f2cf93f6cef51d0
YH820: implement LCD sleep 2019-02-07T19:04:19+00:00 Sebastian Leonhardt sebastian.leonhardt@web.de 2016-06-25T13:25:30+00:00 03e63da3165fa2ea02286a4497d2e9cf0bdc6ea6 use sleep setting to keep transflective LCD active without backlight Change-Id: Iccd97e956d5e4a2a22abc90d15e9123782126ecb 
use sleep setting to keep transflective LCD active without backlight

Change-Id: Iccd97e956d5e4a2a22abc90d15e9123782126ecb
Add HAVE_LINEOUT_DETECTION and associated logic 2019-01-04T22:52:42+00:00 Solomon Peachy pizza@shaftnet.org 2019-01-04T01:46:54+00:00 d24edc605b9b52d3610efbb9cf691c437ea00746 This allows targets to automatically switch audio settings when the line out is plugged/unplugged. Only hooked up on the xDuoo X3, but there are other potential users. Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59 
This allows targets to automatically switch audio settings when the
line out is plugged/unplugged.

Only hooked up on the xDuoo X3, but there are other potential users.

Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
Add Xuelin iHIFI 770/770C/800 support 2019-01-02T13:10:01+00:00 Solomon Peachy pizza@shaftnet.org 2018-06-29T20:09:28+00:00 d4942cc74c82c465ea395637c77ed06565b8b497 Taken from the xvortex fork (Roman Stolyarov) Ported, rebased, and cleaned up by myself. Change-Id: I7b2bca2d29502f2e4544e42f3d122786dd4b7978 
Taken from the xvortex fork (Roman Stolyarov)
Ported, rebased, and cleaned up by myself.

Change-Id: I7b2bca2d29502f2e4544e42f3d122786dd4b7978
Fix Xduoo X3 bootloader build, and silence all warnings. 2019-01-02T04:01:50+00:00 Solomon Peachy pizza@shaftnet.org 2018-12-29T15:37:47+00:00 7e7ca0c85847e0b7eff094710cc5167df4e852da Also enable USB bootloader mode Change-Id: I73224c2e694b9941993c89a114b48d2a907e0dfb 
Also enable USB bootloader mode

Change-Id: I73224c2e694b9941993c89a114b48d2a907e0dfb
FS#7814 - Enable RTC Alarms on H300, X5, and M5 2018-12-25T13:51:33+00:00 Solomon Peachy pizza@shaftnet.org 2018-12-24T02:57:44+00:00 9b3f22ac3af7f89f8b70aa2580435fbb9a5cf052 Original patch by Alexander Spyridakis Modified by Steve Bavin and Igor Poretsky Keymap fixes by Marianne Arnold Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499 
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold

Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
Auto-Ranging Time Formatting For Menus (hh:mm:ss:mss) 2018-12-22T18:27:21+00:00 William Wilgus me.theuser@yahoo.com 2018-12-18T04:27:55+00:00 a06d9c85f7475d650cc451fb0f537623c0206f5a Unifies time formatting in settings_list.c allows time format to display as HH:MM:SS.MSS or any consecutive combination thereof (hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss) works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING' Time is auto-ranged dependent on value Adds talk_time_intervals to allow time values to be spoken similar to display format: x Hours, x Minutes, x Seconds, x Milliseconds Table lookups merged or removed from recording, clip meter and lcd timeout -String_Choice replaced with TABLE_SETTING or INT_SETTING for these functions as well, cleaned-up cfg_vals that get saved to cfgfile RTL Languages ARE supported Negative values ARE supported Backlight on/off are now Always and Never to share formatter with LCD Timeout Added flag to allow ranged units to be locked to a minimum index Added flag to allow leading zero to be supressed from the largest unit merged talk_time_unit() and talk_time_intervals() optimized time_split() optimized format_time_auto() Backlight time-out list same as original Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd 
Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'

Time is auto-ranged dependent on value

Adds talk_time_intervals to allow time values to be spoken similar to
display format:  x Hours, x Minutes, x Seconds, x Milliseconds

Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile

RTL Languages ARE supported

Negative values ARE supported

Backlight on/off are now Always and Never to share formatter with LCD
Timeout

Added flag to allow ranged units to be locked to a minimum index

Added flag to allow leading zero to be supressed from the largest unit

merged talk_time_unit() and talk_time_intervals()

optimized time_split()

optimized format_time_auto()

Backlight time-out list same as original

Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
More keymap refinements 2018-12-06T14:15:26+00:00 Marcin Bukat marcin.bukat@gmail.com 2018-12-06T14:15:26+00:00 4e8ef17a8b756c8894ec4d8b2481794f7f69c361 Change-Id: If3ae6ece7848b143088d5f9ec8c00ed593d59ed2 
Change-Id: If3ae6ece7848b143088d5f9ec8c00ed593d59ed2