rockbox/firmware/pcm_mixer.c, branch master

Enable setting of global output samplerate on certain targets.

2013-07-06T02:22:04+00:00

Replaces the NATIVE_FREQUENCY constant with a configurable frequency.

The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".

"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.

If the hardware doesn't support 48000Hz, no setting will be available.

On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.

The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).

If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.

Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

Add a true waveform display to the oscilloscope plugin.

2012-12-05T01:03:58+00:00

* Adds some additional niftyness like a floating popup display that
is implemented in an OSD library for use by other plugins.

* Speed changes are now gradual for both views and follow a curve
derived from some fiddling around to get a nice feel.

* Refined a few behavioral things overall.

It needs a bit of help from a direct PCM channel callback so it may
capture PCM for waveform display. Also need a few other core routines
to help out for the OSD.

Messes with some keymaps. Some targets need keymaps to access the
different views. Some devices can't support the additional view
because it requires a large buffer ( > 1 s) for samples.

If the plugin buffer is small, they can still use the popup display
since the plugin is also much smaller in that case.

Slow speed waveform needs some refining so it draws gradually like
a real oscilloscope but I'll stick with what it is, for the moment.

Change-Id: Ieb5b7922a2238264e9b19a58cb437739194eb036
Reviewed-on: http://gerrit.rockbox.org/245
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

Clean up peak calculating code.

2012-05-03T00:53:07+00:00

Mixer needn't keep peak data around that will never be used. Just
pass pcm_peaks structure to it instead of allocating for every
channel. Plugin API becomes incompatible.

vu_meter digital mode was still using global peak calculation;
switch it to playback channel like the rest.

Remove some accumulated soil peaks inside pcm.c and make it more
generic.

Change-Id: Ib4d268d80b6a9d09915eea1c91eab483c1a2c009

Use buflib for the allocation of voice PCM resources.

2012-05-02T21:22:28+00:00

Buffers are not allocated and thread is not created until the first
call where voice is required.

Adds a different callback (sync_callback) to buflib so that other
sorts of synchonization are possible, such as briefly locking-out the
PCM callback for a buffer move. It's sort of a messy addition but it
is needed so voice decoding won't have to be stopped when its buffer
is moved.

Change-Id: I4d4d8c35eed5dd15fb7ee7df9323af3d036e92b3

Make rbcodec/dsp includes more specific.

2012-04-29T21:31:30+00:00

Change-Id: Idb6af40df26f5b8499a40e8b98602261ef227044

Coldfire: Optimize emac context save/restore in mixer ISR.

2012-03-11T23:16:12+00:00

Save only once if emac is used in ISR and restore only once per ISR
call if already saved.

Change-Id: I0e40db5d4aab2a8552480f76873f59ff6ccd9977
Reviewed-on: http://gerrit.rockbox.org/176
Tested-by: Michael Sevakis 
Reviewed-by: Michael Sevakis

Revise the PCM callback system after adding multichannel audio.

2012-03-03T06:23:38+00:00

Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording  uses "void **addr".
"const" is put in place throughout where appropriate.

Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.

Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

beep/mixer code: Code police a bit.

2012-02-19T05:38:58+00:00

/firmware is in the #include path with makes #include "asm/beep.c" sufficient.

Add a comment to generic beep code and make another express intent better.

Change-Id: I587cd704478b894785927bdfe2e647e28614df62

PCM mixer: Simplify mixer_channel_play_data.

2012-02-17T08:54:45+00:00

Streamline it to do fewer PCM lock calls in the case of having a prepared
buffer.

Change-Id: I7fca2b95cc5da314ae257522bb6f1ad7aec6634a

Move pcm_mixer helper routines to firmware/asm.

2012-01-22T17:46:45+00:00