rockbox/firmware/sound.c, branch master

Add DAC's oversampling filter roll-off selection to sound settings.

2013-05-24T07:18:16+00:00

Change-Id: I1258ba50dd9308f49d97965562f3a423c9bfb785

Do some cleanup, adjustment and a couple fixes to recent sound changes.

2013-04-23T00:38:17+00:00

* SOUND_x enum can be generated by audiohw_settings.h along with settings
entries and sound_val2phys.

* VOLUME_MIN and VOLUME_MAX are no longer necessary within sound.c. If
you need them, they are for target-defined purposes.

* Fix up SDL volume implementation in sdl.c. Move sim volume calculation
code to pcm-sdl.c.

* Min trigger tresholds were based upon VOLUME_MIN for some reason.
These setting have nothing to do with playback volume. Since it is no
longer present, set these at -89dB which is the minimum peak meter
sensitivity setting.

* Fix an oversight in wm8758.c. I forgot to add the dB->register
conversion to audiohw_set_volume.

Change-Id: Ie1df33f1793eee75e6793f16bc7bddd16edb7f75

Forget about fixedpoint.c in any HWCODEC bin.

2013-04-15T20:11:28+00:00

It bloats to much just for one simple use. Just use a simple function
for shifting sound setting decimal places.

Change-Id: I1a7d37cce6ada3c6e6600dc0d301f354ffeff231

Fix some more errors and warnings from 0c7b787.

2013-04-15T17:24:29+00:00

Change-Id: Ib67d0ab344e36964cadbcc982dc2afe35733770b

Straighten out the mad twisted state of sound.c and related areas.

2013-04-15T16:02:05+00:00

This is going right in since it's long overdue. If anything is goofed,
drop me a line or just tweak it yourself if you know what's wrong. :-)

Make HW/SW codec interface more uniform when emulating HW functionality
on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to-
DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX"
APIs are all in sound.c with none in DSP code any longer.

Reduce number of settings definitions needed by each codec by providing
defaults for common ones like balance, channels and SW tone controls.

Remove need for separate SIM code and tables and add virtual codec header
for hosted targets.

Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b

Fix f5a5b94 errors. Employ SW volume for select targets on SIM.

2013-04-11T23:00:23+00:00

Onda VX747 sim was missing a limits #define; #include limits.h in
pcm_sw_volume.h.

Simply use the software volume control for the SIM volume control
rather than the SDL volume control when the target would have it
natively.

Change-Id: I8e924a2ff1b410f602452d2ea9b691efb82c931e

Implement universal in-PCM-driver software volume control.

2013-04-11T20:55:16+00:00

Implements double-buffered volume, balance and prescaling control in
the main PCM driver when HAVE_SW_VOLUME_CONTROL is defined ensuring
that all PCM is volume controlled and level changes are low in latency.

Supports -73 to +6 dB using a 15-bit factor so that no large-integer
math is needed.

Low-level hardware drivers do not have to implement it themselves but
parameters can be changed (currently defined in pcm-internal.h) to work
best with a particular SoC or to provide different volume ranges.

Volume and prescale calls should be made in the codec driver. It should
appear as a normal hardware interface. PCM volume calls expect .1 dB
units.

Change-Id: Idf6316a64ef4fb8abcede10707e1e6c6d01d57db
Reviewed-on: http://gerrit.rockbox.org/423
Reviewed-by: Michael Sevakis 
Tested-by: Michael Sevakis

Make rbcodec/dsp includes more specific.

2012-04-29T21:31:30+00:00

Change-Id: Idb6af40df26f5b8499a40e8b98602261ef227044

Initial commit of the Samsung YP-R0 port.

2011-12-24T11:56:46+00:00

This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.

The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).

Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.

This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.

Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.

Flyspray: FS#12348
Author: Lorenzo Miori, myself

Merry christmas to ypr0 owners! :)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657

Sandisk Sansa Connect port (FS #12363)

2011-11-16T14:08:01+00:00

Included are drivers for buttons, backlight, lcd, audio and storage.



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657