rockbox/firmware/target/arm/imx233/boot.lds, branch master

imx233: remove redundant lines in linker script

2017-01-24T14:34:20+00:00

Change-Id: Ief8ab0c33abdd3b36cd94b0578e2c5cad22bf2a6

imx233: fix app.lds to properly support INIT_ATTR

2014-02-17T18:02:21+00:00

Original fix by Marcin: it had a problem because crt0 on imx233 is more
complicated than many targets: since we use virtual memory, we first disable
the MMU, then move the entire image (including init and itext stuff), then
setup a temporary stack to setup the MMU. Only when the MMU is enabled, can
we move the init and itext stuff to its right location and finally boot.
This requires some trickery because:
- the initial move copies everything, including init and itext
- the stack overlaps with init and itext to reclaim space
- the temporary stack cannot be the same as the main stack to avoid trashing
  the init and itext code, also it needs to be a physical address

Change-Id: Ibaf331c7d90b61f99225d93c9e621eb0f3f8f2dc

imx233: remove useless alignments in linker scripts

2012-05-19T23:35:24+00:00

Change-Id: I7fc5445f405e1a3e8830ddec2f7652e66a03a633

Do some things to make -ffunction-sections work better.

2011-12-17T01:43:32+00:00

* Add wildcards to various sections placements a la *(".text") => "*(.text*)"
* Remove hacky bits from those linker scripts (no problem encountered testing)
* Change section for asm functions from . to ..
  so that -ffunction-sections works for those asm file too.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31337 a1c6a512-1295-4272-9138-f99709370657

imx233/fuze+: rework crt0 and linker script to be able to load at any address and self-copy at the right one

2011-09-23T20:40:52+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30587 a1c6a512-1295-4272-9138-f99709370657

imx233/fuze+: rework linker script to load the bootloader at ram start + 1Mb to leave a load for the firmware

2011-09-13T23:38:08+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30521 a1c6a512-1295-4272-9138-f99709370657

imx233:fuze+: major memory and usb rework

2011-09-05T11:29:32+00:00

- now identity map dram uncached and have a cached and buffered virtual alias
- rework dma to handle virtual to physical pointers conversion
- fix lcd frame pointer
- implement usb detection properly
- implement bootloader usb properly
- allow the bootloader to disable MMC windowing (useful for recovery)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30432 a1c6a512-1295-4272-9138-f99709370657

imx233/fuze+: move page table to dram

2011-07-23T13:48:01+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30201 a1c6a512-1295-4272-9138-f99709370657

imx233/fuze+: prepare target to enable MMU

2011-07-23T11:45:18+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30199 a1c6a512-1295-4272-9138-f99709370657

imx233/fuze+: make config.h more correct, remove logo from bootloader, update linker file and crt0 to produce a single blob into dram

2011-07-02T02:12:10+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30111 a1c6a512-1295-4272-9138-f99709370657