rockbox/firmware/target/arm/imx31/boot.lds, branch master

Do some things to make -ffunction-sections work better.

2011-12-17T01:43:32+00:00

* Add wildcards to various sections placements a la *(".text") => "*(.text*)"
* Remove hacky bits from those linker scripts (no problem encountered testing)
* Change section for asm functions from . to ..
  so that -ffunction-sections works for those asm file too.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31337 a1c6a512-1295-4272-9138-f99709370657

Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places.

2011-01-08T20:42:51+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29008 a1c6a512-1295-4272-9138-f99709370657

Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.

2010-05-08T07:45:34+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25895 a1c6a512-1295-4272-9138-f99709370657

Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.

2009-03-12T06:31:40+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20299 a1c6a512-1295-4272-9138-f99709370657

Gigabeat S: Move the LCD framebuffer address so that DRAM can be mapped flat between physical and virtual addresses. NO BOOTLOADER UPDATE SHOULD BE NEEDED. The firmware image now handles low-level system setup as well.

2009-02-07T10:09:13+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19935 a1c6a512-1295-4272-9138-f99709370657

Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with initialized sections. 2) Clean all caches in main before doing anything else because vector copying counts as self-modifying code. Up to v.00000012.

2008-05-05T13:30:29+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17381 a1c6a512-1295-4272-9138-f99709370657

Make sure the linker considers crt0.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).

2008-04-29T06:19:32+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657

Also declare .qharray for the bootloader on imx31. Usb is also supported there...

2008-04-20T18:54:19+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17195 a1c6a512-1295-4272-9138-f99709370657

Fix bootloader red.

2008-04-18T17:04:04+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17155 a1c6a512-1295-4272-9138-f99709370657

UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver.

2008-04-18T16:42:50+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657