rockbox/firmware/target/arm/lcd-ssd1815.c, branch master

lcd drivers: Convert lcd_[remote_]framebuffer to a pointer

2012-02-28T00:44:59+00:00

Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)

Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06

Sansa AMS: centralize clock settings in clock-target.h

2008-12-04T20:04:31+00:00

Reorder system_init() to initialize peripherals not only in bootloader
Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657

Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk)

2008-11-30T16:36:32+00:00

Fix lcd drivers which stopped working after changing the PLL.
Move set_cpu_frequency() to a place where it is actually used.
Remove enable_irq() call already done by the bootloader

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657

make the m200v2 lcd work again with higher cpu frequency

2008-11-02T01:10:29+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18974 a1c6a512-1295-4272-9138-f99709370657

add sansa m200v2 support to mkamsboot.

2008-10-19T19:51:42+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18840 a1c6a512-1295-4272-9138-f99709370657

Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.

2008-10-19T14:11:01+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657