rockbox/firmware/target/arm/s5l8700, branch master My Rockbox tree Move intrinsic RTC implmentation differences to driver files 2017-01-27T04:07:49+00:00 Michael Sevakis jethead71@rockbox.org 2017-01-26T00:32:15+00:00 58b849c451ac1281c14bfc535ab7f411a0b736e0 Some drivers set tm_wday just fine and do not need it coerced to be correct. Others set tm_yday, so don't overwrite what the driver sets; just zero it inside if it can't fill the field. Move calls to set_day_of_week() to the sorts of drivers that presumably required the hammer (FS#11814) in get_time() where the weekday isn't locked to the date. Change-Id: Idd0ded6bfc9d9f48fcc1a6074068164c42fcf24a 
Some drivers set tm_wday just fine and do not need it coerced to
be correct. Others set tm_yday, so don't overwrite what the driver
sets; just zero it inside if it can't fill the field. Move calls
to set_day_of_week() to the sorts of drivers that presumably
required the hammer (FS#11814) in get_time() where the weekday
isn't locked to the date.

Change-Id: Idd0ded6bfc9d9f48fcc1a6074068164c42fcf24a
iPod Nano 2G: use the new USB DesignWare driver 2016-08-02T02:57:50+00:00 Cástor Muñoz cmvidal@gmail.com 2016-07-31T01:48:11+00:00 ef572fec523c3064cbec8df3ef7610a2a9b5df54 Change-Id: I8d1561bf4e239b55617a8d5075457a668e0c312c 
Change-Id: I8d1561bf4e239b55617a8d5075457a668e0c312c
iPod Nano2G: clear external interrupts at startup 2016-06-09T22:34:23+00:00 Cástor Muñoz cmvidal@gmail.com 2016-06-09T22:34:22+00:00 489044d1ca9314c79a50768565f4c36a6c4cfc06 Fixes some ROLO issues after commit 9a4cd2e. Note that other ROLO issues still persist. Change-Id: I8e0c60519902013694c5a473dcb9fc62a6ff079c 
Fixes some ROLO issues after commit 9a4cd2e. Note that other ROLO
issues still persist.

Change-Id: I8e0c60519902013694c5a473dcb9fc62a6ff079c
iPod Classic: fix typos / cosmetic 2016-05-28T13:48:02+00:00 Cástor Muñoz cmvidal@gmail.com 2016-05-26T07:59:44+00:00 28920ec5cc994dff19bec100a57de4557f72a7f5 Change-Id: Ic6552dea4b300032875097ef0b885a4ae059f4bc 
Change-Id: Ic6552dea4b300032875097ef0b885a4ae059f4bc
iPod Classic: use PMU interrupts to detect USB and FW 2016-05-26T07:06:30+00:00 Cástor Muñoz cmvidal@gmail.com 2016-05-25T21:43:26+00:00 daee722455d6459d0a7a5a3fcc1555d22144ad41 Change-Id: I9be733e1a943ddeb99335d362f81f74879eeb94b 
Change-Id: I9be733e1a943ddeb99335d362f81f74879eeb94b
iPod Nano2G: add IPOD_ACCESSORY_PROTOCOL 2016-05-14T17:39:09+00:00 Cástor Muñoz cmvidal@gmail.com 2016-05-14T12:24:49+00:00 9a4cd2eaee7d389f2fa6e0d79f0f6ea526f7ef85 Change-Id: I78a19972624504bc802d96b9b8e9cec132164c2c 
Change-Id: I78a19972624504bc802d96b9b8e9cec132164c2c
iPod Nano2G: add HAVE_SERIAL 2016-05-13T21:23:35+00:00 Cástor Muñoz cmvidal@gmail.com 2016-05-12T01:16:27+00:00 d405026ca8bc4c63d8fcd5d63cef02341182774b Change-Id: I46dca69c6708d3e6189f66e70badf0a594bac00b 
Change-Id: I46dca69c6708d3e6189f66e70badf0a594bac00b
Add UART suuport for s5l8700 and s5l8701 2016-05-13T21:23:01+00:00 Cástor Muñoz cmvidal@gmail.com 2016-05-12T00:14:48+00:00 5017523a6b1ea9d230d8b8cf801ad3adbe7f43f5 Add UART support for s5l8700/1 using the UC870X UART controller, actually the functionallity is disabled and must be enabled for each individual target. Tested on iPod Nano 2G (s5l8701), not tested on s5l8700. Change-Id: Ic0f216bb871502d355a70e4b658e536a2c0976a9 
Add UART support for s5l8700/1 using the UC870X UART controller,
actually the functionallity is disabled and must be enabled for
each individual target. Tested on iPod Nano 2G (s5l8701), not
tested on s5l8700.

Change-Id: Ic0f216bb871502d355a70e4b658e536a2c0976a9
iPod Nano 2G and Classic: Fix power and charging detection. 2016-02-14T14:42:54+00:00 Michael Sparmann theseven@gmx.net 2014-07-19T16:32:55+00:00 bc56811a0e1df3e7902b85cf2250d970e0a929d5 This should allow FireWire charging to work on these devices. It also adds charging state detection on the iPod Classic. (cherry picked from commit fa86fec4fb089b47f5c2c3b1f2f3dbc97551895b) On Classic (and probably Nano 2G), it seems that the 100/500mA limit applies only to USB chargers, when FW is connected it supplies all the power (even if USB is also connected) and USB current limit does not affect to FW charging, therefore the limit is only set when USB is connected. Change-Id: I7c6bab1b6a0f295367999c45faeda6085c3fb091 Signed-off-by: Cástor Muñoz <cmvidal@gmail.com> 
This should allow FireWire charging to work on these devices.
It also adds charging state detection on the iPod Classic.

(cherry picked from commit fa86fec4fb089b47f5c2c3b1f2f3dbc97551895b)

On Classic (and probably Nano 2G), it seems that the 100/500mA limit
applies only to USB chargers, when FW is connected it supplies all the
power (even if USB is also connected) and USB current limit does not
affect to FW charging, therefore the limit is only set when USB is
connected.

Change-Id: I7c6bab1b6a0f295367999c45faeda6085c3fb091
Signed-off-by: Cástor Muñoz <cmvidal@gmail.com>
Get rid of stupid _backlight_* function names 2015-01-12T10:09:27+00:00 Marcin Bukat marcin.bukat@gmail.com 2015-01-08T23:22:40+00:00 89ba7e818c0d96b779b02bc7b31c0c6a19294a46 _remote_backlight_* and _buttonlight_* are cleaned as well Change-Id: I73653752831bbe170c26ba95d3bc04c2e3a5cf30 
_remote_backlight_* and _buttonlight_* are cleaned as well

Change-Id: I73653752831bbe170c26ba95d3bc04c2e3a5cf30