rockbox/firmware/target/arm/usb-pp.c, branch master

Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup.

2007-08-01T22:44:02+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657

build with -Wundef to make sure we have spelled the defines right in #if lines

2007-02-17T21:54:17+00:00

and have the proper includes included etc


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12360 a1c6a512-1295-4272-9138-f99709370657

Move dr_controller_setup() to usb_init_device() and add a call to dr_controller_stop() if we detect USB disconnection. This seems to improve reliability when connecting to Mac OS X - Rockbox previously killed its USB stack since the introduction of the new USB detection code.

2007-02-17T01:32:39+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12342 a1c6a512-1295-4272-9138-f99709370657

No functional changes, just reorganising code:

2007-02-16T22:13:21+00:00

1) Move ARC OTG USB (used in PP502x) driver code into it's own file, drivers/arcotg_udc.c. Hopefully in  the future we will be able to adapt more of the Linux driver and add it to this file.
2) Rename mx31.h to arcotg_udc.h to reflect the file the code came from. It's also a more accurate name for the USB controller.
3) Get rid of one more inl()/outl() in usb-pp.c and use the relevant #define instead.
4) Add dr_controller_stop(). Not used yet.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12340 a1c6a512-1295-4272-9138-f99709370657

Fix USB detection on ipods and other portalplayer targets - Rockbox now correctly distinguishes between a USB connection to a computer and a connection to a USB AC charger. Based on the experimental USB code in FS #6494 by Barry Wardell. Closes FS #4724.

2007-02-04T21:46:01+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12198 a1c6a512-1295-4272-9138-f99709370657

Combine USB code for all PortalPlayer targets since they most likely all use the same USB hardware. Add register defines for the USB hardware addresses, based off the Freescale i.MX31 datasheet. Use usb_init() from the iPod code, but modified to use the new register defines rather than oul/inl on the hardware addresses.

2006-12-20T15:28:32+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11823 a1c6a512-1295-4272-9138-f99709370657