rockbox/firmware/target/arm/usb-target.h, branch master

usb-target.h: remove

2011-12-31T18:44:55+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31498 a1c6a512-1295-4272-9138-f99709370657

USBOTG_ARC's USB_DRIVER_CLOSE: move to config.h

2011-12-31T18:44:27+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31494 a1c6a512-1295-4272-9138-f99709370657

firewire/usb_remove/insert_int: move to system-target.h

2011-12-31T18:44:12+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31491 a1c6a512-1295-4272-9138-f99709370657

usb_plugged() is PP only

2011-12-31T18:43:59+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31489 a1c6a512-1295-4272-9138-f99709370657

move usb_pin_init() declaration to PP's system-target.h

2011-12-31T18:43:53+00:00

remove duplicate usb_detect() declaration
Remove all content from empty usb-target.h files

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31488 a1c6a512-1295-4272-9138-f99709370657

usb_init_device(): move prototype to usb.h

2011-12-31T18:43:41+00:00

Get rid of some usb-target.h files

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31487 a1c6a512-1295-4272-9138-f99709370657

Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).

2011-01-15T08:19:30+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29053 a1c6a512-1295-4272-9138-f99709370657

Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.

2009-01-22T22:05:04+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19819 a1c6a512-1295-4272-9138-f99709370657

USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.

2009-01-19T13:41:25+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19797 a1c6a512-1295-4272-9138-f99709370657

Updated our source code header to explicitly mention that we are GPL v2 or

2008-06-28T18:10:04+00:00

later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657