rockbox/firmware/target/arm, branch working My Rockbox tree rename crypto funcs 2016-11-06T23:54:39+00:00 Franklin Wei frankhwei536@gmail.com 2016-11-06T23:54:39+00:00 f0cc822e313a17e4f4f9547aa39f554821c1a247 Change-Id: I554641ab318ab7b6952ea6cbe3ac04f39431deae 
Change-Id: I554641ab318ab7b6952ea6cbe3ac04f39431deae
usb-designware: implement blocking receive 2016-11-06T23:34:49+00:00 Cástor Muñoz cmvidal@gmail.com 2016-07-31T02:24:37+00:00 c180bf225a11d8e554b56130629b5d611fcab554 Change-Id: I5d1d79949fe9da2fd97d0711e1d1a19b7a966cea 
Change-Id: I5d1d79949fe9da2fd97d0711e1d1a19b7a966cea
Merge branch 'master' into working 2016-11-06T23:26:48+00:00 Franklin Wei frankhwei536@gmail.com 2016-11-06T23:26:48+00:00 284b250c3b7feeef0bf5b45879922b6d4d51803d Change-Id: Iad54233a3575c0117f88ce7a1e89bfa639760f63 
Change-Id: Iad54233a3575c0117f88ce7a1e89bfa639760f63
HDD16X0/HDD63X0: Enable power status of charging from USB. 2016-10-02T21:30:30+00:00 Szymon Dziok b0hoon@o2.pl 2016-10-02T21:30:30+00:00 a0b79ce7fa92a02ae525cbdccbb747e4ace6a789 Change-Id: I7b1e5e87921ae0770f7783680c3dbcdbf6f257f3 
Change-Id: I7b1e5e87921ae0770f7783680c3dbcdbf6f257f3
HDD6330: Implement ATA power on/off. 2016-09-25T21:11:21+00:00 Szymon Dziok b0hoon@o2.pl 2016-09-25T21:11:21+00:00 e3deec949df7ddad13b24103b2a70d9ceaa73ecc This should fix some errors, panics in some individual cases. Change-Id: I27ce41f0563378e03371724f8b044404c6e69b76 
This should fix some errors, panics in some individual cases.

Change-Id: I27ce41f0563378e03371724f8b044404c6e69b76
fix red on stmp<3780 2016-09-22T20:13:12+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-09-22T20:13:12+00:00 6e553e315d31ca6f5daab9349bab02aa51e53ea3 Change-Id: I74f0450e8f42032265b980b95f17b0b05d9dffa5 
Change-Id: I74f0450e8f42032265b980b95f17b0b05d9dffa5
imx233: add power-up source to the debug menu 2016-09-22T20:03:31+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-09-22T20:02:31+00:00 420eb66cab6f4664b37dcb985ebad34ce2f475fc Change-Id: Ib67385354b1d6529d41198bfdcb1ecd092e9b98b 
Change-Id: Ib67385354b1d6529d41198bfdcb1ecd092e9b98b
imx233: make microphone bias, bias pin and resistor configurable 2016-09-20T23:36:51+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-09-20T23:02:14+00:00 5e2600eb3ae4563ac9d856ca7a63af1322679ea3 This clearly fixes recording on targets where the bias pin was wrong. It may also improve recording on targets where the bias voltage was wrong. I was unable to find those parameters on the ZEN Mozaic, which fallback to default values. Change-Id: Ifb5f823c9cbd01f0d9a80fa5d49d93972c8b7cfe 
This clearly fixes recording on targets where the bias pin was wrong. It may
also improve recording on targets where the bias voltage was wrong. I was unable
to find those parameters on the ZEN Mozaic, which fallback to default values.

Change-Id: Ifb5f823c9cbd01f0d9a80fa5d49d93972c8b7cfe
imx233: fix recording gain 2016-09-20T23:29:14+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-09-20T23:00:22+00:00 9dc4b00df1a997e8b9223c040c27392d1d2151e3 For some reason, there was a mismatch between the setting (decibel) and the audiohw code (centicel). This resulted in a gain divided by 10. This may explain why some people experienced low volume with the mic on the fuze+. Change-Id: I138ac18dd93c36f43a7dfce735efc826405c598c 
For some reason, there was a mismatch between the setting (decibel) and the
audiohw code (centicel). This resulted in a gain divided by 10. This may
explain why some people experienced low volume with the mic on the fuze+.

Change-Id: I138ac18dd93c36f43a7dfce735efc826405c598c
imx233: add alarm value to debug menu 2016-08-22T22:37:33+00:00 Amaury Pouly amaury.pouly@gmail.com 2016-08-22T22:37:33+00:00 82b09144e9f3b0bd8e9f9a76a18f08f22e9eea8c Hopefully this can help debugging alarm problems. Change-Id: Id8c5603a6372744dfc62890443a37de2dd92a7c0 
Hopefully this can help debugging alarm problems.

Change-Id: Id8c5603a6372744dfc62890443a37de2dd92a7c0