The kernel on this device reports nonexistent key presses, in particular it reports right presses when pressing the left button... Since when it happens, the right press comes after the left one, the new code simply ignores any right press when the left button in pressed. Change-Id: Ib6ced02682d9cecf4c7f6c58834907a667419cd7
Change-Id: I8e7ccbcf8a856bc3e08145a795695fb675794495
Change-Id: Iaec43120ef213d9a3c77201bdf50ebbedd1c5b76
Writing 0 instead of '0' to /sys/class/codec/wm8740_mute enables sound on DX90. Change-Id: Ie8e3980cac6b9298ef2c94f2faac023811d47b32
This patch enables "Settings -> Sound Settings -> DAC's filter roll-off" for the iBasso DX50. Confirmed working on iBasso DX50, firmware 1.6. Change-Id: I901615541d8fa4f6550c5156cf8c6069f5bdf9d0
Depends on http://gerrit.rockbox.org/r/#/c/1043/. This patch adds a new setting in Settings -> General -> System: USB Mode. Usable in Quickscreen and Shortcuts. Possible settings are: - Mass Storage: The default, on USB connect export the internal and external drives as usual. Rockbox will exit gracefully in this case, since the internal drive (/mnt/sdcard) is exported as mass storage device and Android prevents Rockbox from continued execution. - Charge Only: USB charge only, do not export the internal and external drives. This will not close Rockbox. - ADB: Enable the Android Debug Bridge. This will not close Rockbox. Charge only and ADB are actually the same, since it is not yet established if charge only is doable without adb and major hooks into Android. German translation provided. This may be genric for Android based devices but is only enabled for iBasso Devices. Other maintainers may choose do adopt this. Change-Id: I616247c29946c6595ebcf8f0c14b2410c9f0498b
Depends on http://gerrit.rockbox.org/r/#/c/1043/. This patch adds a new setting in Settings -> General -> System: Freq Scaling Governor Usable in Quickscreen and Shortcuts. Possible settings are: - Conservative: Slow frequency switching. - Ondemand or Interactive: Fast frequency switching. - Powersave: Allways lowest frequency. - Performance: Allways highest frequency. German translation provided. This may be genric for Android kernel based devices but is only enabled for iBasso Devices. Other maintainers may choose do adopt this. Change-Id: I10296f5be9586ad3a409105db0cd03682a30e9c1
Reorganization - Separated iBasso devices from PLATFORM_ANDROID. These are now standlone hosted targets. Most device specific code is in the firmware/target/hosted/ibasso directory. - No dependency on Android SDK, only the Android NDK is needed. 32 bit Android NDK and Android API Level 16. - Separate implementation for each device where feasible. Code cleanup - Rewrite of existing code, from simple reformat to complete reimplementation. - New backlight interface, seperating backlight from touchscreen. - Rewrite of device button handler, removing unneeded code and fixing memory leaks. - New Debug messages interface logging to Android adb logcat (DEBUGF, panicf, logf). - Rewrite of lcd device handler, removing unneeded code and fixing memory leaks. - Rewrite of audiohw device handler/pcm interface, removing unneeded code and fixing memory leaks, enabling 44.1/48kHz pthreaded playback. - Rewrite of power and powermng, proper shutdown, using batterylog results (see http://gerrit.rockbox.org/r/#/c/1047/). - Rewrite of configure (Android NDK) and device specific config. - Rewrite of the Android NDK specific Makefile. Misc - All plugins/games/demos activated. - Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa. Includes - http://gerrit.rockbox.org/r/#/c/993/ - http://gerrit.rockbox.org/r/#/c/1010/ - http://gerrit.rockbox.org/r/#/c/1035/ Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight interface and new option for hold switch, touchscreen, physical button interaction. Rockbox needs the iBasso DX50/DX90 loader for startup, see http://gerrit.rockbox.org/r/#/c/1099/ The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If /mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit gracefully and the loader will restart Rockbox on USB disconnect. Tested on iBasso DX50. Compiled (not tested) for iBasso DX90. Compiled (not tested) for PLATFORM_ANDROID. Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
For a usage example see http://gerrit.rockbox.org/r/#/c/1074/ Change-Id: I1d61e0eba6552a9b5d6e15a2e3169435b2f7079d
System -> Debug (Keep Out) -> View CPU stats Will now show the current cpufreq scaling governor, minimum, current and maximum cpufreq scaling frequency for each CPU. This may be genric for Android kernel based devices but is only enabled for iBasso Devices. Other maintainers may choose do adopt this. Change-Id: I53e212f8707bf2abaa557e297293fb559ac37058