rockbox/firmware/usbstack/usb_serial.h, branch quake5

Add const to usb_serial_send() buffer.

2009-08-19T05:30:40+00:00

Flyspray: FS#10519
Author: Amaury Pouly



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22422 a1c6a512-1295-4272-9138-f99709370657

Allow class drivers to reuse the core data buffer for control transfers. This doesn't make much difference right now, but it should keep HID memory usage lower (once HID is ready) (FS#10146 by Tomer Shalev)

2009-04-18T20:40:50+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20735 a1c6a512-1295-4272-9138-f99709370657

reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers

2008-10-03T22:43:16+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18703 a1c6a512-1295-4272-9138-f99709370657

Updated our source code header to explicitly mention that we are GPL v2 or

2008-06-28T18:10:04+00:00

later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657

- change the usb class driver framework to allow for device classes with more than one interface or more than one endpoint pair

2008-04-26T19:02:16+00:00

- move the charging-only dummy driver out of usb_core



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17252 a1c6a512-1295-4272-9138-f99709370657

Add keywords and fix headers for files the usbstack files.

2008-04-18T17:05:15+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17156 a1c6a512-1295-4272-9138-f99709370657

reorganise the usb stack to provide a clean separation between core and class drivers

2008-03-06T21:25:09+00:00

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16541 a1c6a512-1295-4272-9138-f99709370657

implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu.

2008-03-02T20:45:33+00:00

It stops sending data after a while for unknown reasons.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16486 a1c6a512-1295-4272-9138-f99709370657

Major USB stack improvements. It now works at nearly the maximum speed for a full speed connection, and does seem stable.

2008-02-20T22:54:26+00:00

Still not enabled by default, #define USE_ROCKBOX_USB is still required to enable it.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16360 a1c6a512-1295-4272-9138-f99709370657

Add a working serial driver to usb stack. At the moment it simply echos back what it gets. You can test it on linux by

2007-11-30T00:13:00+00:00

0) change relevant defines in usb_core.c
1) modprobe usbserial vendor=0x0781 product=0x7421 debug=1
2) picocom /dev/ttyUSB0
3) look at your logf screen if you build with logf support and enabled LOGF_ENABLE define in usb_serial.c
I also modified usb_core so that storage and serial both can make use the the 'usb_core'-thread. More will come :)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15850 a1c6a512-1295-4272-9138-f99709370657