summaryrefslogtreecommitdiff
path: root/apps/misc.c (follow)
Commit message (Collapse)AuthorAge
* FS#12353: For car adapter mode, make delay before resuming configurableSolomon Peachy2019-02-03
| | | | | | | Original patch by Stanislav Chizhik Udpated by Igor Poretsky & myself Change-Id: I472d4852ac25885658245f077723e4c98b9ad9b8
* FS#10311 -- Add beep when navigating to beginning or end of list.Solomon Peachy2019-01-31
| | | | | | | Originally by Stephane Doyon. Updated by Alex Wallis, Igor Poretsky, and myself. Change-Id: I996f18043bd3377d5aeaf65f4290250ea2a6832b
* Add HAVE_LINEOUT_DETECTION and associated logicSolomon Peachy2019-01-04
| | | | | | | | | This allows targets to automatically switch audio settings when the line out is plugged/unplugged. Only hooked up on the xDuoo X3, but there are other potential users. Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
* Fix Auto Ranged Time Fix Red for DatabaseWilliam Wilgus2018-12-22
| | | | Change-Id: I8f4edc4ca84792f977ea673d2435e15f7e2da14e
* Fix Auto Ranged Time Fix Red for CheckwpsWilliam Wilgus2018-12-22
| | | | Change-Id: I36e37c7557d6eee07978046e549509ee628aba2e
* Auto-Ranging Time Formatting For Menus (hh:mm:ss:mss)William Wilgus2018-12-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unifies time formatting in settings_list.c allows time format to display as HH:MM:SS.MSS or any consecutive combination thereof (hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss) works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING' Time is auto-ranged dependent on value Adds talk_time_intervals to allow time values to be spoken similar to display format: x Hours, x Minutes, x Seconds, x Milliseconds Table lookups merged or removed from recording, clip meter and lcd timeout -String_Choice replaced with TABLE_SETTING or INT_SETTING for these functions as well, cleaned-up cfg_vals that get saved to cfgfile RTL Languages ARE supported Negative values ARE supported Backlight on/off are now Always and Never to share formatter with LCD Timeout Added flag to allow ranged units to be locked to a minimum index Added flag to allow leading zero to be supressed from the largest unit merged talk_time_unit() and talk_time_intervals() optimized time_split() optimized format_time_auto() Backlight time-out list same as original Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
* Voice: Don't omit "shutting down" speech warning when battery dies.Solomon Peachy2018-12-15
| | | | | | (Taken from Igor Poretsky's tree) Change-Id: I0fee8346e857eeaea5059360c0f35bd6a2e98b97
* Fix possible truncation misc.c->output_dyn_value + use KibytesWilliam Wilgus2018-12-09
| | | | | | | | | | output_dyn_value now requires the count for number of units Binary scale now shows Kibibytes instead of kilobytes (g#1742) Fixes output for negative values as well Change-Id: I8aa896860e97d2453fa35069e2dfe1caac60109f
* Add a 32 byte read buffer to read_line.Michael Sevakis2017-12-12
| | | | | | | | Do as with fdprintf and avoid filesystem calls for every single byte. If it overreads, just put the excess back with lseek, which does no I/O itself. Change-Id: Ifd5d21b5dca7183346e44d365d3f7d45e8cc6438
* aced667 forgot about those pesky __PCTOOL__ things.Michael Sevakis2017-11-21
| | | | | | It was so close to aced666. Change-Id: I2b952a0704bb2d006db5e3ea4a929db3118cf390
* Undo hacks to meant to get around string formatting limitationsMichael Sevakis2017-11-21
| | | | | | | | | | | | | | | The new vuprintf makes unnecessary workarounds due to formatting limitations. I checked grep output for whatever appeared to fit but it's possible I missed some instances because they weren't so obvious. Also, this means sound settings can dynamically work with any number of decimals rather than the current assumption of one or two. Add an ipow() function to help and take advantage of dynamic field width and precision. Consolidate string formatting of sound settings. Change-Id: I46caf534859dfd1916cd440cd25e5206b192fcd8
* Fix dangerous castsAmaury Pouly2017-02-04
| | | | | | | | | On Windows 64-bit, the size of long is 32-bit, thus any pointer to long cast is not valid. In any case, one should use intptr_t and ptrdiff_t when casting to integers. This commit attempts to fix all instances reported by GCC. When relevant, I replaced code by the macros PTR_ADD, ALIGN_UP from system.h Change-Id: I2273b0e8465d3c4689824717ed5afa5ed238a2dc
* Implement speaker enable/disable on jack (un)plugAmaury Pouly2017-02-04
| | | | | | | | | | | | | | | | | | | | | The implementation is not very complicated but there are a few things worth noting. There was a previous "speaker enable" setting but it was a boolean. I decided to replace it with a choice setting that has 2 options (on, off) if headphones cannot be detect on this target, or 3 options (on, off, auto) if we can detect headphones. This will break the old setting on target that cannot detect jack but it makes the code more uniform and avoid maintaining two settings with more #ifdef. The third option (auto) uses the LANG_AUTO text, which I think is clear enough (disable speaker on jack plug). In order to avoid code duplication (both in apps and firmware), I decided to keep the audiohw_enable_speaker function as-is: it takes a boolean and doesn't care about the speaker policy. I introduced a new audio_enable_speaker that takes directly the mode (which follows the setting encoding): 0=off, 1=on and 2=auto. This way one calls audio_enable_speaker and it changes the speaker once to reflect the request mode. The apps code then uses this function in the places where it makes sense: on setting load, setting change and jack (un)plug event. Change-Id: I027873f698eb4bc365d7c02b515297806355d9e2
* Save bookmark and settings on shutdown at low battery level on players ↵Mihail Zenkov2016-04-04
| | | | | | without HD Change-Id: I9b9bbf0568de9a82107b0be3b42c3fdba0a0a27d
* Fix reset runtimeMihail Zenkov2016-04-04
| | | | Change-Id: Ic1ba0c7c7883aae43100c67235dbc2db83056fe7
* Rewrite filesystem code (WIP)Michael Sevakis2014-08-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch redoes the filesystem code from the FAT driver up to the clipboard code in onplay.c. Not every aspect of this is finished therefore it is still "WIP". I don't wish to do too much at once (haha!). What is left to do is get dircache back in the sim and find an implementation for the dircache indicies in the tagcache and playlist code or do something else that has the same benefit. Leaving these out for now does not make anything unusable. All the basics are done. Phone app code should probably get vetted (and app path handling just plain rewritten as environment expansions); the SDL app and Android run well. Main things addressed: 1) Thread safety: There is none right now in the trunk code. Most of what currently works is luck when multiple threads are involved or multiple descriptors to the same file are open. 2) POSIX compliance: Many of the functions behave nothing like their counterparts on a host system. This leads to inconsistent code or very different behavior from native to hosted. One huge offender was rename(). Going point by point would fill a book. 3) Actual running RAM usage: Many targets will use less RAM and less stack space (some more RAM because I upped the number of cache buffers for large memory). There's very little memory lying fallow in rarely-used areas (see 'Key core changes' below). Also, all targets may open the same number of directory streams whereas before those with less than 8MB RAM were limited to 8, not 12 implying those targets will save slightly less. 4) Performance: The test_disk plugin shows markedly improved performance, particularly in the area of (uncached) directory scanning, due partly to more optimal directory reading and to a better sector cache algorithm. Uncached times tend to be better while there is a bit of a slowdown in dircache due to it being a bit heavier of an implementation. It's not noticeable by a human as far as I can say. Key core changes: 1) Files and directories share core code and data structures. 2) The filesystem code knows which descriptors refer to same file. This ensures that changes from one stream are appropriately reflected in every open descriptor for that file (fileobj_mgr.c). 3) File and directory cache buffers are borrowed from the main sector cache. This means that when they are not in use by a file, they are not wasted, but used for the cache. Most of the time, only a few of them are needed. It also means that adding more file and directory handles is less expensive. All one must do in ensure a large enough cache to borrow from. 4) Relative path components are supported and the namespace is unified. It does not support full relative paths to an implied current directory; what is does support is use of "." and "..". Adding the former would not be very difficult. The namespace is unified in the sense that volumes may be specified several times along with relative parts, e.g.: "/<0>/foo/../../<1>/bar" :<=> "/<1>/bar". 5) Stack usage is down due to sharing of data, static allocation and less duplication of strings on the stack. This requires more serialization than I would like but since the number of threads is limited to a low number, the tradoff in favor of the stack seems reasonable. 6) Separates and heirarchicalizes (sic) the SIM and APP filesystem code. SIM path and volume handling is just like the target. Some aspects of the APP file code get more straightforward (e.g. no path hashing is needed). Dircache: Deserves its own section. Dircache is new but pays homage to the old. The old one was not compatible and so it, since it got redone, does all the stuff it always should have done such as: 1) It may be update and used at any time during the build process. No longer has one to wait for it to finish building to do basic file management (create, remove, rename, etc.). 2) It does not need to be either fully scanned or completely disabled; it can be incomplete (i.e. overfilled, missing paths), still be of benefit and be correct. 3) Handles mounting and dismounting of individual volumes which means a full rebuild is not needed just because you pop a new SD card in the slot. Now, because it reuses its freed entry data, may rebuild only that volume. 4) Much more fundamental to the file code. When it is built, it is the keeper of the master file list whether enabled or not ("disabled" is just a state of the cache). Its must always to ready to be started and bind all streams opened prior to being enabled. 5) Maintains any short filenames in OEM format which means that it does not need to be rebuilt when changing the default codepage. Miscellaneous Compatibility: 1) Update any other code that would otherwise not work such as the hotswap mounting code in various card drivers. 2) File management: Clipboard needed updating because of the behavioral changes. Still needs a little more work on some finer points. 3) Remove now-obsolete functionality such as the mutex's "no preempt" flag (which was only for the prior FAT driver). 4) struct dirinfo uses time_t rather than raw FAT directory entry time fields. I plan to follow up on genericizing everything there (i.e. no FAT attributes). 5) unicode.c needed some redoing so that the file code does not try try to load codepages during a scan, which is actually a problem with the current code. The default codepage, if any is required, is now kept in RAM separarately (bufalloced) from codepages specified to iso_decode() (which must not be bufalloced because the conversion may be done by playback threads). Brings with it some additional reusable core code: 1) Revised file functions: Reusable code that does things such as safe path concatenation and parsing without buffer limitations or data duplication. Variants that copy or alter the input path may be based off these. To do: 1) Put dircache functionality back in the sim. Treating it internally as a different kind of file system seems the best approach at this time. 2) Restore use of dircache indexes in the playlist and database or something effectively the same. Since the cache doesn't have to be complete in order to be used, not getting a hit on the cache doesn't unambiguously say if the path exists or not. Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8 Reviewed-on: http://gerrit.rockbox.org/566 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested: Michael Sevakis <jethead71@rockbox.org>
* open_utf8: Actually use the result of read/write.Thomas Martitz2014-06-29
| | | | | | This silences warnings on some compilers but is anyway a good idea. Change-Id: Ib566ab59a5d1cb433da466f3ce0c32ff150eb52e
* Implement time-based resume and playback start.Michael Sevakis2014-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This complements offset-based resume and playback start funcionality. The implementation is global on both HWCODEC and SWCODEC. Basically, if either the specified elapsed or offset are non-zero, it indicates a mid-track resume. To resume by time only, set elapsed to nonzero and offset to zero. To resume by offset only, set offset to nonzero and elapsed to zero. Which one the codec uses and which has priority is up to the codec; however, using an elapsed time covers more cases: * Codecs not able to use an offset such as VGM or other atomic formats * Starting playback at a nonzero elapsed time from a source that contains no offset, such as a cuesheet The change re-versions pretty much everything from tagcache to nvram. Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38 Reviewed-on: http://gerrit.rockbox.org/516 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested: Michael Sevakis <jethead71@rockbox.org>
* Fix PlayerThomas Martitz2014-01-15
| | | | Change-Id: Ie489f91f78a9bdbded9b4ce09c74602dbca3934b
* Fix checkwps.Thomas Martitz2014-01-15
| | | | Change-Id: Ic10df965d55939b4d5ff5105f83a08a097877910
* skins: Update SBS when changing activities.Thomas Martitz2014-01-15
| | | | | | | | | | When changing activities (those that are indicated via %cs skin tag), the sbs needs to be updated, so that the UI viewport can be applied before that activity draws its UI. Fixes FS#12804. I hope this commit doesn't have bad side effects. Change-Id: If45654e356749f5f27991430dbd1da6f23e6f802
* Implement volume limiter featurePurlingNayuki2014-01-13
| | | | | | | | | | | | | | Add a "volume limit" parameter to the configuration file. The maximum value of volume setting in sound menu will be limited to the same as volume limit. Also each time when setvol() is excuted, Rockbox will check if the global_settings.volume value larger than global_settings.volume_limit. If larger, take the value of volume_limit instead. The volume_limit argument shares the same maximum and minimum values with volume argument, while taking the maximum volume as its default value. Change-Id: I8ca9bc6ea6e617b48fc346aae5f2a0a1d259ae36 Reviewed-on: http://gerrit.rockbox.org/697 Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
* Updated IAP commands.Ralf Ertzinger2013-11-10
| | | | | | | | | | | | | | | | | | Originally written and uploaded by Lalufu (Ralf Ertzinger) in Feb 2012. They have been condensed into a single patch and some further additions by Andy Potter. Currently includes Authentication V2 support from iPod to Accessory, RF/BlueTooth transmitter support, selecting a playlist and selecting a track from the current playlist. Does not support uploading Album Art or podcasts. Has been tested on the following iPods, 4th Gen Grayscale, 4th Gen Color/Photo, Mini 2nd Gen, Nano 1st Gen and Video 5.5Gen. Change-Id: Ie8fc098361844132f0228ecbe3c48da948726f5e Co-Authored by: Andy Potter <liveboxandy@gmail.com> Reviewed-on: http://gerrit.rockbox.org/533 Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
* Get rid of some superfluous single-purpose functions in playback.Michael Sevakis2013-07-13
| | | | | | | | | | | * Remove explicit tracking of elapsed time of previous track. * Remove function to obtain auto skip flag. * Most playback events now carry the extra information instead and pass 'struct track_event *' for data. * Tweak scrobbler to use PLAYBACK_EVENT_TRACK_FINISH, which makes it cleaner and removes the struct mp3entry. Change-Id: I500d2abb4056a32646496efc3617406e36811ec5
* Fix whitespace in files for following commit.Michael Sevakis2013-07-12
| | | | Change-Id: I4adb8a152e9b99fcd26d95da7334d7d0cbe2a036
* New GUI browser to select one (or more) folders.Thomas Martitz2012-07-30
| | | | | | | | | | | | | | The browser lets the user pick one or more directories in a convinient GUI browser. The initial directory list is read from a string (separated by colons) and the resulting list is written back to the same string (again separated by colons). Note: The work was initially done by Jonathan Gordon, however I changed it substantially so I claim autorship. This selector is going to be used for autoresume and database scan folders. Change-Id: Id1d3186dad783411eb5c6056ce93f5b6123c7aa0
* Fix fast_readline to handle windows line endings (\r\n)Jonathan Gordon2012-07-05
| | | | Change-Id: I3561eff9bc4e244a84ef4afee26a40432d1073dd
* Make DSP's replaygain independent of global_settings.Michael Sevakis2012-04-30
| | | | | | | | | | Moves replaygain definitions to lib/rbcodec/dsp/dsp_misc.h. Intermediate functions in misc.c handle any adjustment and calling the rbcodec APIs. Change-Id: I9f03561bca9aedd13760cf19c4e19aa3c68e7024 Reviewed-on: http://gerrit.rockbox.org/140 Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
* Tweak paramters of mp3_play_data and callback.Michael Sevakis2012-03-04
| | | | | | | | | Use generic void * and size_t and make mp3_play_data and its callback agree on types. Use mp3_play_callback_t instead of prototyping right in the function call (so it's not so messy to look at). Change doesn't appear to require plugin API version increment. Change-Id: Idcab2740ee316a2beb6e0a87b8f4934d9d6b3dd8
* Correct actionable offense for misappropriation of action context.Michael Sevakis2012-03-03
| | | | | | | Just use a bool to indicate raw button instead of action code. No bother with plugin version yet again so soon. Change-Id: I4aa075c0c1fb5308c9d49bebb30ac76f671b2335
* Change keyclick_click so that it may accept raw buttons or actions.Michael Sevakis2012-03-03
| | | | | | | | Adds a new context, CONTEXT_RAWBUTTON, that I hope is out of the way of everything. Unfortunately have to increment min plugin API version for the second time today to accomodate additional parameter. Change-Id: Iaa46b926e57cf377fd4906f2d42bb98e87215033
* checkwps: Fix buildall.sh and some RaaA/ypr0 versions.Thomas Martitz2012-02-10
| | | | Change-Id: I5889743e94ed568c8f7dcc50de0b03b8421969f7
* fix compiler error, missed action.hJonathan Gordon2012-01-15
| | | | Change-Id: Idc6d59835d1fd20cb4828543547b6d8b6f74053b
* keyclick: Add a callback so screens can cancel a click. Add a generic list ↵Jonathan Gordon2012-01-12
| | | | | | callback to stop clicks when we are at the end of the list Change-Id: Iabb44a861dd7506cd883c1bdb0241303fa646746
* apps: lcd-remote.h is not needed if HAVE_REMOTE_LCD is not definedRafaël Carré2012-01-07
| | | | | | Fix a comment git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31608 a1c6a512-1295-4272-9138-f99709370657
* Rework powermgmt to enable code re-use on appliation and sims.Thomas Martitz2012-01-03
| | | | | | | | | | | | | | | | | | | | | * Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application) to break powermgmt.c's assumption about the ability to read battery voltage. There's now additionally percentage (android) and remaining time measure (maemo). No measure at all also works (sdl app). If voltage can't be measured, then battery_level() is king and it'll be used for power_history and runtime estimation. * Implement target's API in the simulator, i.e. _battery_voltage(), so it doesn't need to implement it's own powermgmt.c and other stubs. Now the sim behaves much more like a native target, although it still changes the simulated battery voltage quickly, * Other changes include include renaming battery_adc_voltage() to _battery_voltage(), for consistency with the new target functions and making some of the apps code aware that voltage and runtime estimation is not always available. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
* Convert hard-coded unicode byte order mark values to constants.Nick Peskett2011-12-20
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31374 a1c6a512-1295-4272-9138-f99709370657
* Change the "keyclick repeat" setting behaviour so when it is off only the ↵Jonathan Gordon2011-11-16
| | | | | | | | *first* repeat will click. Otherwise single presses and all wheel movements will cause a click. with "keyclick repeat" enabled *all* repeats will cause clicks git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30997 a1c6a512-1295-4272-9138-f99709370657
* Finally commit FS#5111 - piezo clicker for ipods!Jonathan Gordon2011-11-16
| | | | | | Origional implementation by Robert Keevil with contributions from Frederik Vestre, Stoyan Stratev, Craig Elliott, Michael Sparmann, Thomas Schott, Rosso Maltese, and syncs from a bunch of other people! git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30995 a1c6a512-1295-4272-9138-f99709370657
* Fix typos in usb_screen.c and use lcd_remote_bmp() for showing the rockbox ↵Thomas Martitz2011-11-13
| | | | | | logo on remotes as well. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30972 a1c6a512-1295-4272-9138-f99709370657
* Add the ability to create a prefilled struct bitmap along with generated images.Thomas Martitz2011-11-13
| | | | | | | | This allows to directly draw generated and builtin images using lcd_bmp(bm_xxx); Also fixes builtin list icons on non-mono targets, as they didn't have the format field set. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30971 a1c6a512-1295-4272-9138-f99709370657
* Changed the FOR_NB_SCREENS macro to always be a for loop that declares its ↵Björn Stenberg2011-10-15
| | | | | | own loop variable. This removes the need to declare this variable in the outer scope. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30756 a1c6a512-1295-4272-9138-f99709370657
* fix the last of the errorJonathan Gordon2011-09-06
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30464 a1c6a512-1295-4272-9138-f99709370657
* Add the new file and fix the compile errorJonathan Gordon2011-09-06
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30462 a1c6a512-1295-4272-9138-f99709370657
* Lists can now be completly draw using the skin engine!Jonathan Gordon2011-09-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | due to lack of user feedback the actual tags may change, hopefully not though. The way it works is the skin specifies a rectangle and a viewport label. For each item in the list that is being displayed all viewports with the specified label are drawn. However, instead of the viewport x/y position being offset from the top left corner like normal they are offset from the rectangle position in the list (so think of them as child-viewports of the rectangle which moves). Normally the rectangle will move down the screen to show a normal list, this can be changed to move across the screen in a grid pattern. The UI viewport is used to bound the items (i.e %Vi() ) Scrolling is completly disabled in all items except the currently selected item. This works well in combination with the %cs tag to show differently styled lists based on the current screen :) New tags: %LT - Get the current items text %LI - Get the current items icon number %Lc - Use as a conditional to determine if the current item is the selected item %LB - BAR TAG to show the scroll bar, params/options like other bar types. It still needs a bit of work though. Use as a conditional to find out if the bar is actually needed %Lb(viewport, width, height [,tile]) - specify the viewport label to draw for each item and the size of each item. if the last param is 'tile' it will form a grid instead of a list example.sbs: %?cs<%Lb(a,100,20)|> %V(0,0,10,-,1)%Vf(aabbcc) %?LB<%LB(0,0,10,185, invert)> %Vi(-,10,0,-,-35,1) %Vl(a,5,5,160,12,1) %s%?Lc<%Vg(00ffaa, ff0000, 000000)%Vs(gradient)%>%>%>%ac>zzzzzzz %LT zzzzz%s%?Lc<%ar%<%<%<> %V(0,185,-,-,1) %s%LT git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30461 a1c6a512-1295-4272-9138-f99709370657
* Fix panic after usb extraction if lastfm logging is enabled.Thomas Martitz2011-08-17
| | | | | | | | | Previously the scrobbler was shutdown, probably to force a log flush, and the cache was re-allocated afterwards. Now don't shut down or re-allocate, but instead rely on the ata idle callback which is called called on usb insertion to do the log flush. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30325 a1c6a512-1295-4272-9138-f99709370657
* GSoC/Buflib: Replace all direct accesses to audiobuf with buffer API functions.Thomas Martitz2011-08-14
| | | | | | | | | | | | | | | | | | | | | | | Namely, introduce buffer_get_buffer() and buffer_release_buffer(). buffer_get_buffer() aquires all available and grabs a lock, attempting to call buffer_alloc() or buffer_get_buffer() while this lock is locked will cause a panicf() (doesn't actually happen, but is for debugging purpose). buffer_release_buffer() unlocks that lock and can additionally increment the audiobuf buffer to make an allocation. Pass 0 to only unlock if buffer was used temporarily only. buffer_available() is a replacement function to query audiobuflen, i.e. what's left in the buffer. Buffer init is moved up in the init chain and handles ipodvideo64mb internally. Further changes happened to mp3data.c and talk.c as to not call the above API functions, but get the buffer from callers. The caller is the audio system which has the buffer lock while mp3data.c and talk mess with the buffer. mpeg.c now implements some buffer related functions of playback.h, especially audio_get_buffer(), allowing to reduce #ifdef hell a tiny bit. audiobuf and audiobufend are local to buffer.c now. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30308 a1c6a512-1295-4272-9138-f99709370657
* Remove a couple of duplicate #includesBertrik Sikken2011-08-14
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30301 a1c6a512-1295-4272-9138-f99709370657
* Remove hosted_get_volume(), as event data is available in button_get_data().Thomas Martitz2011-08-14
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30300 a1c6a512-1295-4272-9138-f99709370657
* imx233/fuze+: huge reworkAmaury Pouly2011-07-23
| | | | | | | | | | | | | | | - enable MMU -rework lcd frame buffer - add rtc/adc/power stubs (or not) - fix a few MMC related defines (hopefully) - implement cache handling for DMA - more SD work - add keymap (based on clip) - add virtual buttons - update linker scripts - big step toward apps actually compiling git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30200 a1c6a512-1295-4272-9138-f99709370657
generated by cgit v1.1 at 2026-04-27 05:50:11 +0000