From 8e1e6f9b2939abd617b84c515a1018701a2cf082 Mon Sep 17 00:00:00 2001 From: Marcoen Hirschberg Date: Fri, 29 Sep 2006 10:54:01 +0000 Subject: add the I2C driver for the Gigabeat git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11090 a1c6a512-1295-4272-9138-f99709370657 --- firmware/SOURCES | 1 + firmware/target/arm/gigabeat/meg-fx/i2c-meg-fx.c | 121 +++++++++++++++++++++++ 2 files changed, 122 insertions(+) create mode 100644 firmware/target/arm/gigabeat/meg-fx/i2c-meg-fx.c diff --git a/firmware/SOURCES b/firmware/SOURCES index 423fe0e..ffc2387 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES @@ -302,6 +302,7 @@ target/arm/gigabeat/meg-fx/usb-meg-fx.c target/arm/gigabeat/meg-fx/lcd-meg-fx.c target/arm/gigabeat/meg-fx/sc606-meg-fx.c target/arm/gigabeat/meg-fx/adc-meg-fx.c +target/arm/gigabeat/meg-fx/i2c-meg-fx.c #endif #endif diff --git a/firmware/target/arm/gigabeat/meg-fx/i2c-meg-fx.c b/firmware/target/arm/gigabeat/meg-fx/i2c-meg-fx.c new file mode 100644 index 0000000..c0e9fb4 --- /dev/null +++ b/firmware/target/arm/gigabeat/meg-fx/i2c-meg-fx.c @@ -0,0 +1,121 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2006 by Linus Nielsen Feltzing + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" +#include "cpu.h" +#include +#include "kernel.h" +#include "system.h" +#include "hwcompat.h" +#include "logf.h" +#include "debug.h" +#include "string.h" +#include "generic_i2c.h" + +void i2c_sda_output(void) +{ + GPECON |= (1 << 30); +} + +void i2c_sda_input(void) +{ + GPECON &= ~(3 << 30); +} + +void i2c_sda_lo(void) +{ + GPEDAT &= ~(1 << 15); +} + +void i2c_sda_hi(void) +{ + GPEDAT |= (1 << 15); +} + +int i2c_sda(void) +{ + return GPEDAT & (1 << 15); +} + +void i2c_scl_output(void) +{ + GPECON |= (1 << 28); +} + +void i2c_scl_input(void) +{ + GPECON &= ~(3 << 28); +} + +void i2c_scl_lo(void) +{ + GPEDAT &= ~(1 << 14); +} + +int i2c_scl(void) +{ + return GPEDAT & (1 << 14); +} + +void i2c_scl_hi(void) +{ + i2c_scl_input(); + while(!i2c_scl()); + GPEDAT |= (1 << 14); + i2c_scl_output(); +} + +void i2c_delay(void) +{ + do { int _x; for(_x=0;_x<2000;_x++);} while (0); +} + +struct i2c_interface s3c2440_i2c = { + 0x34, /* Address */ + + /* Bit-banged interface definitions */ + i2c_scl_hi, /* Drive SCL high, might sleep on clk stretch */ + i2c_scl_lo, /* Drive SCL low */ + i2c_sda_hi, /* Drive SDA high */ + i2c_sda_lo, /* Drive SDA low */ + i2c_sda_input, /* Set SDA as input */ + i2c_sda_output, /* Set SDA as output */ + i2c_scl_input, /* Set SCL as input */ + i2c_scl_output, /* Set SCL as output */ + i2c_scl, /* Read SCL, returns 0 or nonzero */ + i2c_sda, /* Read SDA, returns 0 or nonzero */ + + i2c_delay, /* START SDA hold time (tHD:SDA) */ + i2c_delay, /* SDA hold time (tHD:DAT) */ + i2c_delay, /* SDA setup time (tSU:DAT) */ + i2c_delay, /* STOP setup time (tSU:STO) */ + i2c_delay, /* Rep. START setup time (tSU:STA) */ + i2c_delay, /* SCL high period (tHIGH) */ +}; + +void i2c_init(void) +{ + /* Set GPE15 (SDA) and GPE14 (SCL) to 1 */ + GPECON = (GPECON & ~(0xF<<28)) | 5<<28; + i2c_add_node(&s3c2440_i2c); +} + +void i2c_send(int bus_address, int reg_address, const unsigned char buf) +{ + i2c_write_data(bus_address, reg_address, &buf, 1); +} -- cgit v1.1