Introduce new config header 'config-sim.h' that takes care of undefining things that shouldn't be defined for sims so that the target configs no longer need to have #ifndef SIMULATOR sections and to bring some consistency for what is and is not included for sims.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23547 a1c6a512-1295-4272-9138-f99709370657

58 files changed, 87 insertions, 236 deletions

diff --git a/firmware/export/config-c100.h b/firmware/export/config-c100.h
index 5cc29e3..a332bf5 100644
--- a/firmware/export/config-c100.h
+++ b/firmware/export/config-c100.h
@@ -95,8 +95,6 @@
 /* define this if the unit should not shut down on low battery. */
 #define NO_LOW_BATTERY_SHUTDOWN
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TCC770 */
 #define CONFIG_CPU TCC770
 
@@ -128,4 +126,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-c200.h b/firmware/export/config-c200.h
index ab70396..45cfb8a 100644
--- a/firmware/export/config-c200.h
+++ b/firmware/export/config-c200.h
@@ -149,9 +149,6 @@
 #define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
 #define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5024 */
 #define CONFIG_CPU PP5022
 
@@ -204,8 +201,6 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
 /* Default recording levels */
 #define DEFAULT_REC_MIC_GAIN    23
 #define DEFAULT_REC_LEFT_GAIN   23
diff --git a/firmware/export/config-c200v2.h b/firmware/export/config-c200v2.h
index 2441fe0..65aebf2 100644
--- a/firmware/export/config-c200v2.h
+++ b/firmware/export/config-c200v2.h
@@ -137,9 +137,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5024 */
 #define CONFIG_CPU AS3525
 
@@ -189,8 +186,6 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
 /** Port-specific settings **/
 
 /* Main LCD backlight brightness range and defaults */
diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h
index b57881f..4fa5f94 100644
--- a/firmware/export/config-clip.h
+++ b/firmware/export/config-clip.h
@@ -140,9 +140,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have a AMS AS3525 SoC */
 #define CONFIG_CPU AS3525
 
@@ -189,8 +186,6 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
 /** Port-specific settings **/
 
 /* Main LCD backlight brightness range and defaults */
diff --git a/firmware/export/config-cowond2.h b/firmware/export/config-cowond2.h
index 45bf90b..88c7ce5 100644
--- a/firmware/export/config-cowond2.h
+++ b/firmware/export/config-cowond2.h
@@ -62,14 +62,10 @@
 /* define this if you have a flash memory storage */
 #define HAVE_FLASH_STORAGE
 
-#ifndef SIMULATOR
 #define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
 #define HAVE_MULTIDRIVE
 #define HAVE_HOTSWAP
 #define NUM_DRIVES 2
-#else
-#define CONFIG_STORAGE STORAGE_NAND
-#endif
 
 #define CONFIG_NAND NAND_TCC
 
@@ -150,7 +146,6 @@
 #define CURRENT_BACKLIGHT  30 /* TBD */ 
 #define CURRENT_RECORD     0  /* no recording yet */ 
 
-#ifndef SIMULATOR
 /* Define this if you have a TCC7801 */
 #define CONFIG_CPU TCC7801
 
@@ -174,5 +169,3 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-creativezv.h b/firmware/export/config-creativezv.h
index f396694..5454038 100644
--- a/firmware/export/config-creativezv.h
+++ b/firmware/export/config-creativezv.h
@@ -127,8 +127,6 @@
 /* Hardware controlled charging with monitoring */
 //#define CONFIG_CHARGING CHARGING_MONITOR
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TI TMS320DM320 */
 #define CONFIG_CPU DM320
 
@@ -144,9 +142,6 @@
 /* Define this if you have ATA power-off control */
 #define HAVE_ATA_POWER_OFF
 
-/* Virtual LED (icon) */
-#define CONFIG_LED LED_VIRTUAL
-
 /* Offset ( in the firmware file's header ) to the file CRC */
 #define FIRMWARE_OFFSET_FILE_CRC 0
 
@@ -167,4 +162,3 @@
 #define USB_PRODUCT_ID 0x4133
 #define USB_NUM_ENDPOINTS 7
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-creativezvm.h b/firmware/export/config-creativezvm.h
index 5eeaa7a..37d2eb4 100644
--- a/firmware/export/config-creativezvm.h
+++ b/firmware/export/config-creativezvm.h
@@ -128,8 +128,6 @@
 /* Hardware controlled charging with monitoring */
 //#define CONFIG_CHARGING CHARGING_MONITOR
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TI TMS320DM320 */
 #define CONFIG_CPU DM320
 
@@ -173,4 +171,3 @@
 #define BUTTON_DEBUG
 */
 
-#endif
diff --git a/firmware/export/config-creativezvm60gb.h b/firmware/export/config-creativezvm60gb.h
index 41e0be3..e34515c 100644
--- a/firmware/export/config-creativezvm60gb.h
+++ b/firmware/export/config-creativezvm60gb.h
@@ -127,8 +127,6 @@
 /* Hardware controlled charging with monitoring */
 //#define CONFIG_CHARGING CHARGING_MONITOR
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TI TMS320DM320 */
 #define CONFIG_CPU DM320
 
@@ -165,4 +163,3 @@
 #define USB_PRODUCT_ID 0x4133
 #define USB_NUM_ENDPOINTS 7
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-e200.h b/firmware/export/config-e200.h
index 18de2f6..dd65e6a 100644
--- a/firmware/export/config-e200.h
+++ b/firmware/export/config-e200.h
@@ -143,9 +143,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5024 */
 #define CONFIG_CPU PP5024
 
@@ -198,9 +195,6 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
-
 /** Port-specific settings **/
 
 /* Main LCD backlight brightness range and defaults */
diff --git a/firmware/export/config-e200v2.h b/firmware/export/config-e200v2.h
index 4dc3e43..b4985ec 100644
--- a/firmware/export/config-e200v2.h
+++ b/firmware/export/config-e200v2.h
@@ -145,9 +145,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have an AMS AS3525*/
 #define CONFIG_CPU AS3525
 
@@ -206,8 +203,6 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
 /* Default recording levels */
 #define DEFAULT_REC_MIC_GAIN    23
 #define DEFAULT_REC_LEFT_GAIN   23
diff --git a/firmware/export/config-fmrecorder.h b/firmware/export/config-fmrecorder.h
index acc1c74..97dc52e 100644
--- a/firmware/export/config-fmrecorder.h
+++ b/firmware/export/config-fmrecorder.h
@@ -98,8 +98,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a SH7034 */
 #define CONFIG_CPU SH7034
 
@@ -134,8 +132,6 @@
 #define BOOTFILE "ajbrec." BOOTFILE_EXT
 #define BOOTDIR "/"
 
-#endif /* SIMULATOR */
-
 #define HAVE_LCD_CONTRAST
 
 #define MIN_CONTRAST_SETTING        5
diff --git a/firmware/export/config-fuze.h b/firmware/export/config-fuze.h
index 2a438ec..e9b54e1 100644
--- a/firmware/export/config-fuze.h
+++ b/firmware/export/config-fuze.h
@@ -150,9 +150,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have an AMS AS3525*/
 #define CONFIG_CPU AS3525
 
@@ -204,5 +201,3 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
diff --git a/firmware/export/config-gigabeat-s.h b/firmware/export/config-gigabeat-s.h
index 36f874b..344c572 100644
--- a/firmware/export/config-gigabeat-s.h
+++ b/firmware/export/config-gigabeat-s.h
@@ -128,11 +128,6 @@
 #define HAVE_HEADPHONE_DETECTION
 #endif /* BOOTLOADER */
 
-#ifndef SIMULATOR
-
-/* The LCD on a Gigabeat is 240x320 - it is portrait */
-#define HAVE_PORTRAIT_LCD
-
 #define CONFIG_CPU IMX31L
 
 /* Define this if you want to use imx31l's i2c interface */
@@ -221,4 +216,3 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-#endif
diff --git a/firmware/export/config-gigabeat.h b/firmware/export/config-gigabeat.h
index c427220..a20a5d8 100644
--- a/firmware/export/config-gigabeat.h
+++ b/firmware/export/config-gigabeat.h
@@ -59,9 +59,7 @@
 
 #define HAVE_TOUCHPAD_SENSITIVITY_SETTING
 
-#ifndef SIMULATOR
 #define HAVE_HARDWARE_BEEP
-#endif
 
 #endif /* BOOTLOADER */
 
@@ -140,11 +138,6 @@
  * when running */
 #define HAVE_BATTERY_SWITCH
 
-#ifndef SIMULATOR
-
-/* The LCD on a Gigabeat is 240x320 - it is portrait */
-#define HAVE_PORTRAIT_LCD
-
 #define HAVE_LCD_FLIP
 
 /* Define this if your LCD can set contrast */
@@ -190,4 +183,3 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-#endif
diff --git a/firmware/export/config-h10.h b/firmware/export/config-h10.h
index 5ac12af..6ad7a8d 100644
--- a/firmware/export/config-h10.h
+++ b/firmware/export/config-h10.h
@@ -127,8 +127,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -185,4 +183,3 @@
 
 #define ICODE_ATTR_TREMOR_NOT_MDCT
 
-#endif
diff --git a/firmware/export/config-h100.h b/firmware/export/config-h100.h
index f06aaf8..520079b 100644
--- a/firmware/export/config-h100.h
+++ b/firmware/export/config-h100.h
@@ -133,8 +133,6 @@
 #define CURRENT_RECORD    105  /* additional current while recording */
 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 
-#ifndef SIMULATOR
-
 /* Define this if you have a Motorola SCF5249 */
 #define CONFIG_CPU MCF5249
 
@@ -183,8 +181,6 @@
 /* Define this if the EEPROM chip is used */
 #define HAVE_EEPROM_SETTINGS
 
-#endif /* !SIMULATOR */
-
 /* Define bitmask of input sources - recordable bitmask can be defined
    explicitly if different */
 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
diff --git a/firmware/export/config-h300.h b/firmware/export/config-h300.h
index 9fad6cc..09fce49 100644
--- a/firmware/export/config-h300.h
+++ b/firmware/export/config-h300.h
@@ -139,8 +139,6 @@
  * if USB/MAIN power is discernable and hardware doesn't compel charging */
 #define HAVE_USB_CHARGING_ENABLE
 
-#ifndef SIMULATOR
-
 /* Define this if you have a Motorola SCF5249 */
 #define CONFIG_CPU MCF5249
 
@@ -181,8 +179,6 @@
 /* Define this if there is an EEPROM chip */
 #define HAVE_EEPROM
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-hdd1630.h b/firmware/export/config-hdd1630.h
index 1d7bff3..f44f7d1 100644
--- a/firmware/export/config-hdd1630.h
+++ b/firmware/export/config-hdd1630.h
@@ -141,8 +141,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5022
 
@@ -199,4 +197,3 @@
 
 #define ICODE_ATTR_TREMOR_NOT_MDCT
 
-#endif
diff --git a/firmware/export/config-iaudio7.h b/firmware/export/config-iaudio7.h
index 68393f1..44a6f84 100644
--- a/firmware/export/config-iaudio7.h
+++ b/firmware/export/config-iaudio7.h
@@ -133,8 +133,6 @@
 
 #define CONFIG_CHARGING CHARGING_SIMPLE
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TCC770 */
 #define CONFIG_CPU TCC770
 
@@ -162,4 +160,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-iaudiom3.h b/firmware/export/config-iaudiom3.h
index b3d7fb8..99c4605 100644
--- a/firmware/export/config-iaudiom3.h
+++ b/firmware/export/config-iaudiom3.h
@@ -117,8 +117,6 @@
 /* define current usage levels */
 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 #define HAVE_LCD_CONTRAST
 
@@ -140,8 +138,8 @@
 /* Define this if you have ATA power-off control */
 #define HAVE_ATA_POWER_OFF
 
-/* Virtual LED (icon) */
-#define CONFIG_LED LED_VIRTUAL /* FIXME: implement hardware LED handling */
+/* FIXME: implement hardware LED handling */
+/* #define CONFIG_LED LED_REAL */
 
 /* Offset ( in the firmware file's header ) to the file CRC */
 #define FIRMWARE_OFFSET_FILE_CRC 0
@@ -160,8 +158,6 @@
 #define FLASH_ENTRYPOINT       0x00001000
 #define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-iaudiom5.h b/firmware/export/config-iaudiom5.h
index b10ac9a..00e07a9 100644
--- a/firmware/export/config-iaudiom5.h
+++ b/firmware/export/config-iaudiom5.h
@@ -136,8 +136,6 @@
 /* define current usage levels */
 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 #define HAVE_LCD_CONTRAST
 
@@ -176,8 +174,6 @@
 #define FLASH_ENTRYPOINT       0x00001000
 #define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /** Port-specific settings **/
 
 /* Main LCD contrast range and defaults */
diff --git a/firmware/export/config-iaudiox5.h b/firmware/export/config-iaudiox5.h
index 0cf3932..a6b48b9 100644
--- a/firmware/export/config-iaudiox5.h
+++ b/firmware/export/config-iaudiox5.h
@@ -139,8 +139,6 @@
 /* define current usage levels */
 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 #define HAVE_LCD_CONTRAST
 
@@ -182,8 +180,6 @@
 #define FLASH_ENTRYPOINT       0x00001000
 #define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-ifp7xx.h b/firmware/export/config-ifp7xx.h
index 901f78f..48a53f8 100644
--- a/firmware/export/config-ifp7xx.h
+++ b/firmware/export/config-ifp7xx.h
@@ -76,8 +76,6 @@
 /* define this if the unit should not shut down on low battery. */
 #define NO_LOW_BATTERY_SHUTDOWN
 
-#ifndef SIMULATOR
-
 /* Define this if you have a Philips PNX0101 */
 #define CONFIG_CPU PNX0101
 
@@ -127,4 +125,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif
diff --git a/firmware/export/config-ipod1g2g.h b/firmware/export/config-ipod1g2g.h
index 549af02..835b75b 100644
--- a/firmware/export/config-ipod1g2g.h
+++ b/firmware/export/config-ipod1g2g.h
@@ -120,8 +120,6 @@
 /* FIXME: Don't shutdown on low battery until we have proper suspend. */
 #define NO_LOW_BATTERY_SHUTDOWN
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5002 */
 #define CONFIG_CPU PP5002
 
@@ -168,4 +166,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-ipod3g.h b/firmware/export/config-ipod3g.h
index 197f80f..7cab884 100644
--- a/firmware/export/config-ipod3g.h
+++ b/firmware/export/config-ipod3g.h
@@ -124,8 +124,6 @@
 /* Hardware controlled charging? FIXME */
 #define CONFIG_CHARGING CHARGING_SIMPLE
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5002 */
 #define CONFIG_CPU PP5002
 
@@ -172,4 +170,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-ipod4g.h b/firmware/export/config-ipod4g.h
index 232e0aa..6195e0c 100644
--- a/firmware/export/config-ipod4g.h
+++ b/firmware/export/config-ipod4g.h
@@ -141,8 +141,6 @@
 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 #endif
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -185,9 +183,6 @@
 #define USB_PRODUCT_ID 0x1203
 #define HAVE_USB_HID_MOUSE
 
-/* Virtual LED (icon) */
-#define CONFIG_LED LED_VIRTUAL
-
 /* Define this if you have adjustable CPU frequency */
 #define HAVE_ADJUSTABLE_CPU_FREQ
 
@@ -205,4 +200,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif
diff --git a/firmware/export/config-ipodcolor.h b/firmware/export/config-ipodcolor.h
index 3254c0a..7c7897b 100644
--- a/firmware/export/config-ipodcolor.h
+++ b/firmware/export/config-ipodcolor.h
@@ -118,8 +118,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -177,4 +175,3 @@
 #define IPOD_ACCESSORY_PROTOCOL
 #define HAVE_SERIAL
 
-#endif
diff --git a/firmware/export/config-ipodmini.h b/firmware/export/config-ipodmini.h
index 9cf377f..be3ab2b 100644
--- a/firmware/export/config-ipodmini.h
+++ b/firmware/export/config-ipodmini.h
@@ -137,8 +137,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -192,4 +190,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif
diff --git a/firmware/export/config-ipodmini2g.h b/firmware/export/config-ipodmini2g.h
index dcd3113..53476b1 100644
--- a/firmware/export/config-ipodmini2g.h
+++ b/firmware/export/config-ipodmini2g.h
@@ -144,8 +144,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5022 */
 #define CONFIG_CPU PP5022
 
@@ -202,4 +200,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif
diff --git a/firmware/export/config-ipodnano.h b/firmware/export/config-ipodnano.h
index 005d2ff..f1a4d6a 100644
--- a/firmware/export/config-ipodnano.h
+++ b/firmware/export/config-ipodnano.h
@@ -131,8 +131,6 @@
 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 #endif
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5022 */
 #define CONFIG_CPU PP5022
 
@@ -187,4 +185,3 @@
 #define IPOD_ACCESSORY_PROTOCOL
 #define HAVE_SERIAL
 
-#endif
diff --git a/firmware/export/config-ipodnano2g.h b/firmware/export/config-ipodnano2g.h
index 59ab28c..bcc98e0 100644
--- a/firmware/export/config-ipodnano2g.h
+++ b/firmware/export/config-ipodnano2g.h
@@ -105,9 +105,7 @@
 /* Define the type of audio codec */
 #define HAVE_WM8975
 
-#ifndef SIMULATOR
 #define HAVE_PCM_DMA_ADDRESS
-#endif
 
 /* Define this for LCD backlight available */
 #define HAVE_BACKLIGHT
@@ -134,8 +132,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 //#define HAVE_LCD_CONTRAST
 
@@ -184,8 +180,6 @@
 #define FLASH_MAGIC            0xfbfbfbf1
 #endif
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-ipodvideo.h b/firmware/export/config-ipodvideo.h
index f760a56..9762e71 100644
--- a/firmware/export/config-ipodvideo.h
+++ b/firmware/export/config-ipodvideo.h
@@ -152,8 +152,6 @@
 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 #endif
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5022 */
 #define CONFIG_CPU PP5022
 
@@ -196,9 +194,6 @@
 #define USB_PRODUCT_ID 0x1209
 #define HAVE_USB_HID_MOUSE
 
-/* Virtual LED (icon) */
-#define CONFIG_LED LED_VIRTUAL
-
 /* Define this if you have adjustable CPU frequency */
 #define HAVE_ADJUSTABLE_CPU_FREQ
 
@@ -222,4 +217,3 @@
 #define IPOD_ACCESSORY_PROTOCOL
 #define HAVE_SERIAL
 
-#endif
diff --git a/firmware/export/config-logikdax.h b/firmware/export/config-logikdax.h
index 8cfbbd8..8fbd064 100644
--- a/firmware/export/config-logikdax.h
+++ b/firmware/export/config-logikdax.h
@@ -103,8 +103,6 @@
 /* define this if the unit should not shut down on low battery. */
 #define NO_LOW_BATTERY_SHUTDOWN
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TCC773L */
 #define CONFIG_CPU TCC773L
 
@@ -147,4 +145,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-lyre_proto1.h b/firmware/export/config-lyre_proto1.h
index d157f5b..250b8e2 100644
--- a/firmware/export/config-lyre_proto1.h
+++ b/firmware/export/config-lyre_proto1.h
@@ -84,8 +84,6 @@
 #define BATTERY_CAPACITY_INC 100         /* capacity increment */
 #define BATTERY_TYPES_COUNT  1          /* only one type */
 
-#ifndef SIMULATOR
-
 #define CONFIG_CPU AT91SAM9260
 
 /* Define this to the CPU frequency */
@@ -103,4 +101,3 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-#endif
diff --git a/firmware/export/config-m200.h b/firmware/export/config-m200.h
index 3ec721c..59f5ad7 100644
--- a/firmware/export/config-m200.h
+++ b/firmware/export/config-m200.h
@@ -98,8 +98,6 @@
 /* define this if the unit should not shut down on low battery. */
 #define NO_LOW_BATTERY_SHUTDOWN
 
-#ifndef SIMULATOR
-
 /* Define this if you have a TCC770 */
 #define CONFIG_CPU TCC770
 
@@ -133,4 +131,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-m200v4.h b/firmware/export/config-m200v4.h
index b734f3e..13dcec9 100644
--- a/firmware/export/config-m200v4.h
+++ b/firmware/export/config-m200v4.h
@@ -111,8 +111,6 @@
 /* define this if the unit should not shut down on low battery. */
 #define NO_LOW_BATTERY_SHUTDOWN
 
-#ifndef SIMULATOR
-
 /* Define this if you have an AMS AS3525 */
 #define CONFIG_CPU AS3525
 
@@ -162,4 +160,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-meizu-m3.h b/firmware/export/config-meizu-m3.h
index 7da1759..12f2cfd 100644
--- a/firmware/export/config-meizu-m3.h
+++ b/firmware/export/config-meizu-m3.h
@@ -119,8 +119,6 @@
 /* Hardware controlled charging, software can monitor plug and charge state */
 #define CONFIG_CHARGING CHARGING_MONITOR
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 //#define HAVE_LCD_CONTRAST
 
@@ -162,8 +160,6 @@
 #define FLASH_ENTRYPOINT       0x00001000
 #define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-meizu-m6sl.h b/firmware/export/config-meizu-m6sl.h
index 033dc61..ffa8903 100644
--- a/firmware/export/config-meizu-m6sl.h
+++ b/firmware/export/config-meizu-m6sl.h
@@ -119,8 +119,6 @@
 /* Hardware controlled charging? FIXME */
 #define CONFIG_CHARGING CHARGING_SIMPLE
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 //#define HAVE_LCD_CONTRAST
 
@@ -162,8 +160,6 @@
 #define FLASH_ENTRYPOINT       0x00001000
 #define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-meizu-m6sp.h b/firmware/export/config-meizu-m6sp.h
index 02f1f86..0fc7264 100644
--- a/firmware/export/config-meizu-m6sp.h
+++ b/firmware/export/config-meizu-m6sp.h
@@ -122,8 +122,6 @@
 /* Hardware controlled charging? FIXME */
 #define CONFIG_CHARGING CHARGING_SIMPLE
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 //#define HAVE_LCD_CONTRAST
 
@@ -165,8 +163,6 @@
 #define FLASH_ENTRYPOINT       0x00001000
 #define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config-mini2440.h b/firmware/export/config-mini2440.h
index f08d487..739489b 100644
--- a/firmware/export/config-mini2440.h
+++ b/firmware/export/config-mini2440.h
@@ -120,10 +120,6 @@
 /* The number of bytes reserved for loadable plugins */
 #define PLUGIN_BUFFER_SIZE 0x100000
 
-
-/***************************************************************************/
-#ifndef SIMULATOR
-
 #define CONFIG_CPU S3C2440
 
 /* Define this to the CPU frequency */
@@ -158,5 +154,3 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-#endif
-/***************************************************************************/
diff --git a/firmware/export/config-mrobe100.h b/firmware/export/config-mrobe100.h
index c348770..5a27900 100644
--- a/firmware/export/config-mrobe100.h
+++ b/firmware/export/config-mrobe100.h
@@ -123,8 +123,6 @@
 
 #define BATTERY_CAPACITY_DEFAULT 720 /* default battery capacity */
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -199,4 +197,3 @@
 
 #define ICODE_ATTR_TREMOR_NOT_MDCT
 
-#endif
diff --git a/firmware/export/config-mrobe500.h b/firmware/export/config-mrobe500.h
index 9d04aac..7b73fe7 100644
--- a/firmware/export/config-mrobe500.h
+++ b/firmware/export/config-mrobe500.h
@@ -199,8 +199,6 @@
 /* Define this if you have a Texas Instruments TSC2100 touch screen */
 #define HAVE_TSC2100
 
-#if !defined(SIMULATOR)
-
 /* M66591 register base */
 #define M66591_BASE 0x60000000
 
@@ -252,4 +250,3 @@
 
 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 
-#endif
diff --git a/firmware/export/config-ondavx747.h b/firmware/export/config-ondavx747.h
index dee1866..c4fc39b 100644
--- a/firmware/export/config-ondavx747.h
+++ b/firmware/export/config-ondavx747.h
@@ -140,9 +140,7 @@
 #define HAVE_SW_TONE_CONTROLS
 
 /* has no volume control, so we use the software ones */
-#ifndef SIMULATOR
 #define HAVE_SW_VOLUME_CONTROL
-#endif
 
 /* software controlled volume ranges from -73 -> 0 dB, other than that
    is controlled by hardware */
@@ -169,8 +167,6 @@
 
 #define CFG_EXTAL 12000000    /* EXT clock: 12 Mhz */
 
-#ifndef SIMULATOR
-
 #define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
 #define NUM_DRIVES 2
 
@@ -217,4 +213,3 @@
 #define USB_VENDOR_ID     0x07C4
 #define USB_PRODUCT_ID    0xA4A5
 
-#endif
diff --git a/firmware/export/config-ondavx767.h b/firmware/export/config-ondavx767.h
index cc0ce10..661d3e9 100644
--- a/firmware/export/config-ondavx767.h
+++ b/firmware/export/config-ondavx767.h
@@ -133,8 +133,6 @@
 /* Hardware controlled charging with monitoring */
 //#define CONFIG_CHARGING CHARGING_MONITOR
 
-#ifndef SIMULATOR
-
 /* Define this if you have a Ingenic JZ4740 */
 #define CONFIG_CPU JZ4732
 
@@ -167,4 +165,3 @@
 #define USB_VENDOR_ID   0x07C4
 #define USB_PRODUCT_ID  0xA4A5
 
-#endif
diff --git a/firmware/export/config-ondiofm.h b/firmware/export/config-ondiofm.h
index 7a2b30d..b14f113 100644
--- a/firmware/export/config-ondiofm.h
+++ b/firmware/export/config-ondiofm.h
@@ -79,8 +79,6 @@
 #define CURRENT_USB         1  /* host powered in USB mode; avoid zero-div */
 #define CURRENT_BACKLIGHT   0  /* no backlight */
 
-#ifndef SIMULATOR
-
 /* Define this if you have a SH7034 */
 #define CONFIG_CPU SH7034
 
@@ -134,8 +132,6 @@
 #define BOOTFILE "ajbrec." BOOTFILE_EXT
 #define BOOTDIR "/"
 
-#endif /* SIMULATOR */
-
 #define HAVE_LCD_CONTRAST
 
 #define MIN_CONTRAST_SETTING        5
diff --git a/firmware/export/config-ondiosp.h b/firmware/export/config-ondiosp.h
index 134f7e3..452b47b 100644
--- a/firmware/export/config-ondiosp.h
+++ b/firmware/export/config-ondiosp.h
@@ -66,8 +66,6 @@
 #define CURRENT_USB         1  /* host powered in USB mode; avoid zero-div */
 #define CURRENT_BACKLIGHT   0  /* no backlight */
 
-#ifndef SIMULATOR
-
 /* Define this if you have a SH7034 */
 #define CONFIG_CPU SH7034
 
@@ -118,8 +116,6 @@
 #define BOOTFILE "ajbrec." BOOTFILE_EXT
 #define BOOTDIR "/"
 
-#endif /* SIMULATOR */
-
 #define HAVE_LCD_CONTRAST
 
 #define MIN_CONTRAST_SETTING        5
diff --git a/firmware/export/config-player.h b/firmware/export/config-player.h
index 5f6cf17..c60ee6a 100644
--- a/firmware/export/config-player.h
+++ b/firmware/export/config-player.h
@@ -58,8 +58,6 @@
 /* Hardware controlled charging */
 #define CONFIG_CHARGING CHARGING_SIMPLE
 
-#ifndef SIMULATOR
-
 /* Define this if you have a SH7034 */
 #define CONFIG_CPU SH7034
 
@@ -97,8 +95,6 @@
 #define BOOTFILE "archos." BOOTFILE_EXT
 #define BOOTDIR "/"
 
-#endif /* SIMULATOR */
-
 #define HAVE_LCD_CONTRAST
 
 #define MIN_CONTRAST_SETTING        5
diff --git a/firmware/export/config-recorder.h b/firmware/export/config-recorder.h
index 74a7ce7..88ff2c2 100644
--- a/firmware/export/config-recorder.h
+++ b/firmware/export/config-recorder.h
@@ -87,8 +87,6 @@
 /* Software controlled charging */
 #define CONFIG_CHARGING CHARGING_TARGET
 
-#ifndef SIMULATOR
-
 /* Define this if you have a SH7034 */
 #define CONFIG_CPU SH7034
 
@@ -123,8 +121,6 @@
 #define BOOTFILE "ajbrec." BOOTFILE_EXT
 #define BOOTDIR "/"
 
-#endif /* SIMULATOR */
-
 #define HAVE_LCD_CONTRAST
 
 #define MIN_CONTRAST_SETTING        5
diff --git a/firmware/export/config-recorderv2.h b/firmware/export/config-recorderv2.h
index 5ca9459..6a55644 100644
--- a/firmware/export/config-recorderv2.h
+++ b/firmware/export/config-recorderv2.h
@@ -93,8 +93,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a SH7034 */
 #define CONFIG_CPU SH7034
 
@@ -134,8 +132,6 @@
 #define BOOTFILE "ajbrec." BOOTFILE_EXT
 #define BOOTDIR "/"
 
-#endif /* SIMULATOR */
-
 #define HAVE_LCD_CONTRAST
 
 #define MIN_CONTRAST_SETTING        5
diff --git a/firmware/export/config-sa9200.h b/firmware/export/config-sa9200.h
index 2ab538e..ce23318 100644
--- a/firmware/export/config-sa9200.h
+++ b/firmware/export/config-sa9200.h
@@ -134,9 +134,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5024 */
 #define CONFIG_CPU PP5024
 
@@ -194,4 +191,3 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
diff --git a/firmware/export/config-sim.h b/firmware/export/config-sim.h
new file mode 100644
index 0000000..0656da3
--- /dev/null
+++ b/firmware/export/config-sim.h
@@ -0,0 +1,80 @@
+/* This config file is for all simulators, and is used in addition to the
+   target specific configs */
+
+#undef CONFIG_CPU
+
+#undef HAVE_FMADC
+
+#undef NEED_ATA_POWER_BATT_MEASURE
+
+#undef CONFIG_I2C
+
+#undef HAVE_PCM_DMA_ADDRESS
+
+#undef FLASH_SIZE
+
+#undef CPU_FREQ
+
+#undef HAVE_ATA_POWER_OFF
+
+#undef CONFIG_LCD
+
+#undef CONFIG_LED
+
+#undef ROM_START
+
+#undef FIRMWARE_OFFSET_FILE_LENGTH
+#undef FIRMWARE_OFFSET_FILE_CRC
+#undef FIRMWARE_OFFSET_FILE_DATA
+
+#undef AMS_OF_SIZE
+
+#undef HAVE_MULTIDRIVE
+#undef NUM_DRIVES
+#undef HAVE_HOTSWAP
+
+#undef CONFIG_STORAGE
+
+#undef CONFIG_USBOTG
+
+#undef USB_HANDLED_BY_OF
+
+#undef HAVE_USBSTACK
+#undef USE_ROCKBOX_USB
+#undef USB_VENDOR_ID
+#undef USB_PRODUCT_ID
+#undef USB_NUM_ENDPOINTS
+#undef HAVE_USB_HID_MOUSE
+
+#undef HAVE_ADJUSTABLE_CPU_FREQ
+
+#undef MI4_FORMAT
+#undef BOOTFILE_EXT
+#undef BOOTFILE
+#undef BOOTDIR
+
+#undef BOOTLOADER_ENTRYPOINT
+
+#undef FLASH_ENTRYPOINT
+
+#undef FLASH_MAGIC
+
+#undef HAVE_EEPROM
+#undef HAVE_EEPROM_SETTINGS
+
+#undef HAVE_HARDWARE_BEEP
+
+#undef HAVE_POWEROFF_WHILE_CHARGING
+
+#undef INCLUDE_TIMEOUT_API
+
+#undef HAVE_FLASHED_ROCKBOX
+
+#undef IPOD_ACCESSORY_PROTOCOL
+
+#undef HAVE_WHEEL_POSITION
+
+#undef HAVE_LCD_MODES
+
+#undef HAVE_SPEAKER
+
diff --git a/firmware/export/config-tpj1022.h b/firmware/export/config-tpj1022.h
index cdb1eb9..89e3d6d 100644
--- a/firmware/export/config-tpj1022.h
+++ b/firmware/export/config-tpj1022.h
@@ -88,8 +88,6 @@
 /* define this if the unit can be powered or charged via USB */
 /*#define HAVE_USB_POWER*/
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -139,4 +137,3 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-#endif
diff --git a/firmware/export/config-view.h b/firmware/export/config-view.h
index 4ba5d91..7b13bf7 100644
--- a/firmware/export/config-view.h
+++ b/firmware/export/config-view.h
@@ -135,9 +135,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-/** Non-simulator section **/
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5024 */
 #define CONFIG_CPU PP6100
 
@@ -190,8 +187,6 @@
 
 #define INCLUDE_TIMEOUT_API
 
-#endif /* SIMULATOR */
-
 /** Port-specific settings **/
 
 /* Main LCD backlight brightness range and defaults */
diff --git a/firmware/export/config-yh820.h b/firmware/export/config-yh820.h
index 4005ec0..4968960 100644
--- a/firmware/export/config-yh820.h
+++ b/firmware/export/config-yh820.h
@@ -106,9 +106,7 @@
 #define CONFIG_STORAGE STORAGE_ATA
 
 /* We're able to shut off power to the HDD */
-#ifndef SIMULATOR
 /* todo #define HAVE_ATA_POWER_OFF */
-#endif
 
 /* Define this if you have a software controlled poweroff */
 #define HAVE_SW_POWEROFF
@@ -139,8 +137,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -185,4 +181,3 @@
 
 #define ICODE_ATTR_TREMOR_NOT_MDCT
 
-#endif /* !SIMULATOR */
diff --git a/firmware/export/config-yh920.h b/firmware/export/config-yh920.h
index e5a0fc8..310fa13 100644
--- a/firmware/export/config-yh920.h
+++ b/firmware/export/config-yh920.h
@@ -113,9 +113,7 @@
 #define CONFIG_STORAGE STORAGE_ATA
 
 /* We're able to shut off power to the HDD */
-#ifndef SIMULATOR
 /* todo #define HAVE_ATA_POWER_OFF */
-#endif
 
 /* Define this if you have a software controlled poweroff */
 #define HAVE_SW_POWEROFF
@@ -146,8 +144,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -191,4 +187,3 @@
 
 #define ICODE_ATTR_TREMOR_NOT_MDCT
 
-#endif /* !SIMULATOR */
diff --git a/firmware/export/config-yh925.h b/firmware/export/config-yh925.h
index 4119118..55d46ae 100644
--- a/firmware/export/config-yh925.h
+++ b/firmware/export/config-yh925.h
@@ -110,9 +110,7 @@
 #define CONFIG_STORAGE STORAGE_ATA
 
 /* We're able to shut off power to the HDD */
-#ifndef SIMULATOR
 /* todo #define HAVE_ATA_POWER_OFF */
-#endif
 
 /* Define this if you have a software controlled poweroff */
 #define HAVE_SW_POWEROFF
@@ -143,8 +141,6 @@
 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER
 
-#ifndef SIMULATOR
-
 /* Define this if you have a PortalPlayer PP5020 */
 #define CONFIG_CPU PP5020
 
@@ -189,4 +185,3 @@
 
 #define ICODE_ATTR_TREMOR_NOT_MDCT
 
-#endif /* !SIMULATOR */
diff --git a/firmware/export/config-yps3.h b/firmware/export/config-yps3.h
index cd7cf50..fd8fde6 100644
--- a/firmware/export/config-yps3.h
+++ b/firmware/export/config-yps3.h
@@ -121,8 +121,6 @@
 /* Hardware controlled charging, software can monitor plug and charge state */
 #define CONFIG_CHARGING CHARGING_MONITOR
 
-#ifndef SIMULATOR
-
 /* Define this if your LCD can set contrast */
 //#define HAVE_LCD_CONTRAST
 
@@ -167,8 +165,6 @@
 //#define FLASH_ENTRYPOINT       0x00001000
 //#define FLASH_MAGIC            0xfbfbfbf1
 
-#endif /* SIMULATOR */
-
 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN
 
diff --git a/firmware/export/config.h b/firmware/export/config.h
index adc03d5..bb1c5ea 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -403,6 +403,11 @@ Lyre prototype 1 */
 /* no known platform */
 #endif
 
+/* keep this include after the target configs */
+#ifdef SIMULATOR
+#include "config-sim.h"
+#endif
+
 /* setup basic macros from capability masks */
 #include "config_caps.h"