Fix up ZVM builds. It appeared to share common definitions with PP502x targets so use those. Remove one stale comment left behind in last commit.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19798 a1c6a512-1295-4272-9138-f99709370657

4 files changed, 19 insertions, 9 deletions

diff --git a/bootloader/gigabeat-s.c b/bootloader/gigabeat-s.c
index 15cbcbe..57eb18e 100644
--- a/bootloader/gigabeat-s.c
+++ b/bootloader/gigabeat-s.c
@@ -93,10 +93,7 @@ static void handle_usb(void)
     /* Check if plugged and pause to look at messages. If the cable was pulled
      * while waiting, proceed as if it never was plugged. */
     if (!usb_plugged() || !pause_if_button_pressed(true))
-    {
-        /* Bang on the controller */
         return;
-    }
 
     /** Enter USB mode **/
 
diff --git a/firmware/drivers/isp1583.c b/firmware/drivers/isp1583.c
index 2d98638..9e7d601 100644
--- a/firmware/drivers/isp1583.c
+++ b/firmware/drivers/isp1583.c
@@ -55,7 +55,7 @@ struct usb_endpoint
 };
 
 static unsigned char setup_pkt_buf[8];
-static struct usb_endpoint endpoints[NUM_ENDPOINTS];
+static struct usb_endpoint endpoints[USB_NUM_ENDPOINTS];
 
 static bool high_speed_mode = false;
 
@@ -366,7 +366,7 @@ static void setup_endpoints(void)
     usb_setup_endpoint(ep_index(0, DIR_TX), 64, 0);
     
     int i;
-    for(i = 1; i < NUM_ENDPOINTS-1; i++)
+    for(i = 1; i < USB_NUM_ENDPOINTS-1; i++)
     {
         usb_setup_endpoint(ep_index(i, DIR_RX), (high_speed_mode ? 512 : 64), 2); /* 2 = TYPE_BULK */
         usb_setup_endpoint(ep_index(i, DIR_TX), (high_speed_mode ? 512 : 64), 2);
@@ -375,7 +375,7 @@ static void setup_endpoints(void)
     usb_enable_endpoint(ep_index(0, DIR_RX));
     usb_enable_endpoint(ep_index(0, DIR_TX));
     
-    for (i = 1; i < NUM_ENDPOINTS-1; i++)
+    for (i = 1; i < USB_NUM_ENDPOINTS-1; i++)
     {
         usb_enable_endpoint(ep_index(i, DIR_RX));
         usb_enable_endpoint(ep_index(i, DIR_TX));
@@ -598,7 +598,7 @@ void usb_drv_cancel_all_transfers(void)
     logf("usb_drv_cancel_all_tranfers()");
     int i;
 
-    for(i=0;i<NUM_ENDPOINTS-1;i++)
+    for(i=0;i<USB_NUM_ENDPOINTS-1;i++)
         endpoints[i].halt[0] = endpoints[i].halt[1] = 1;
 }
 
@@ -608,7 +608,7 @@ int usb_drv_request_endpoint(int dir)
 
     bit=(dir & USB_DIR_IN)? 2:1;
 
-    for (i=1; i < NUM_ENDPOINTS; i++) {
+    for (i=1; i < USB_NUM_ENDPOINTS; i++) {
         if((endpoints[i].allocation & bit)!=0)
             continue;
         endpoints[i].allocation |= bit;
@@ -738,7 +738,7 @@ void usb_drv_set_address(int address)
 
 int dbg_usb_num_items(void)
 {
-    return 2+NUM_ENDPOINTS*2;
+    return 2+USB_NUM_ENDPOINTS*2;
 }
 
 char* dbg_usb_item(int selected_item, void *data, char *buffer, size_t buffer_len)
diff --git a/firmware/export/dm320.h b/firmware/export/dm320.h
index 4d6b9ac..0e16233 100644
--- a/firmware/export/dm320.h
+++ b/firmware/export/dm320.h
@@ -43,6 +43,14 @@
 #define PHY_IO_BASE2     0x00060000
 #define DM320_REG2(addr) (*(volatile unsigned int *)(PHY_IO_BASE2 + (addr)))
 
+/* USBOTG */
+#define USB_NUM_ENDPOINTS  3
+/* This needs to be 2048 byte aligned, but USB_QHARRAY_ATTR should take care
+ * of that */
+#define USB_QHARRAY_ATTR   __attribute__((section(".qharray"),nocommon,aligned(4)))
+#define USB_DEVBSS_ATTR    IBSS_ATTR
+
+
 /* Timer 0-3 */
 #define IO_TIMER0_TMMD            DM320_REG(0x0000)
 #define IO_TIMER0_TMRSV0          DM320_REG(0x0002)
diff --git a/firmware/target/arm/tms320dm320/creative-zvm/usb-creativezvm.c b/firmware/target/arm/tms320dm320/creative-zvm/usb-creativezvm.c
index 52e5a95..9b362f0 100644
--- a/firmware/target/arm/tms320dm320/creative-zvm/usb-creativezvm.c
+++ b/firmware/target/arm/tms320dm320/creative-zvm/usb-creativezvm.c
@@ -56,6 +56,11 @@ void usb_enable(bool on)
          usb_core_exit();
 }
 
+void usb_attach(void)
+{
+    usb_enable(true);
+}
+
 void IRAM_ATTR GIO7(void)
 {
 #ifdef DEBUG