Fix red.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15476 a1c6a512-1295-4272-9138-f99709370657

4 files changed, 11 insertions, 11 deletions

diff --git a/firmware/target/arm/ipod/lcd-color_nano.c b/firmware/target/arm/ipod/lcd-color_nano.c
index 501c20d..5306925 100644
--- a/firmware/target/arm/ipod/lcd-color_nano.c
+++ b/firmware/target/arm/ipod/lcd-color_nano.c
@@ -106,7 +106,7 @@ void lcd_init_device(void)
     GPIOB_ENABLE |= 0x4; /* B02 enable */
     GPIOB_ENABLE |= 0x8; /* B03 enable */
     outl(inl(0x70000084) | 0x2000000, 0x70000084); /* D01 enable */
-    GPO32 |= 0x2000000;  /* D01 =1 */
+    GPO32_VAL |= 0x2000000;  /* D01 =1 */
 
     DEV_EN |= 0x20000;   /* PWM enable */
 
diff --git a/firmware/target/arm/ipod/lcd-gray.c b/firmware/target/arm/ipod/lcd-gray.c
index 55f1027..b9b5619 100644
--- a/firmware/target/arm/ipod/lcd-gray.c
+++ b/firmware/target/arm/ipod/lcd-gray.c
@@ -171,7 +171,7 @@ void lcd_init_device(void)
     GPIOB_ENABLE |= 0x4; /* B02 enable */
     GPIOB_ENABLE |= 0x8; /* B03 enable */
     outl(inl(0x70000084) | 0x2000000, 0x70000084); /* D01 enable */
-    GPO32 |= 0x2000000;  /* D01 =1 */
+    GPO32_VAL |= 0x2000000;  /* D01 =1 */
 
     DEV_EN |= 0x20000;   /* PWM enable */
 #endif
diff --git a/firmware/target/arm/sandisk/ata-c200_e200.c b/firmware/target/arm/sandisk/ata-c200_e200.c
index c9f97c0..91ff1d9 100644
--- a/firmware/target/arm/sandisk/ata-c200_e200.c
+++ b/firmware/target/arm/sandisk/ata-c200_e200.c
@@ -25,7 +25,7 @@
 #include "thread.h"
 #include "led.h"
 #include "disk.h"
-#include "pp5024.h"
+#include "cpu.h"
 #include "panic.h"
 #include "usb.h"
 
@@ -529,7 +529,7 @@ static void sd_card_mux(int card_no)
 #ifdef SANSA_E200
     if (card_no == 0)
     {
-        GPO32 |= 0x4;
+        GPO32_VAL |= 0x4;
 
         GPIOA_ENABLE     &= ~0x7a;
         GPIOA_OUTPUT_EN  &= ~0x7a;
@@ -541,7 +541,7 @@ static void sd_card_mux(int card_no)
     }
     else
     {
-        GPO32 &= ~0x4;
+        GPO32_VAL &= ~0x4;
 
         GPIOD_ENABLE     &= ~0x1f;
         GPIOD_OUTPUT_EN  &= ~0x1f;
@@ -554,7 +554,7 @@ static void sd_card_mux(int card_no)
 #else /* SANSA_C200 */
     if (card_no == 0)
     {
-        GPO32 |= 0x4;
+        GPO32_VAL |= 0x4;
 
         GPIOD_ENABLE     &= ~0x1f;
         GPIOD_OUTPUT_EN  &= ~0x1f;
@@ -566,7 +566,7 @@ static void sd_card_mux(int card_no)
     }
     else
     {
-        GPO32 &= ~0x4;
+        GPO32_VAL &= ~0x4;
 
         GPIOA_ENABLE     &= ~0x7a;
         GPIOA_OUTPUT_EN  &= ~0x7a;
diff --git a/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c b/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
index 5bd14c2..3a26c47 100644
--- a/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
+++ b/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
@@ -24,7 +24,7 @@
 #include "system.h"
 #include <string.h>
 #include "backlight-target.h"
-#include "pp5024.h"
+#include "cpu.h"
 
 /* Power and display status */
 static bool power_on   = false; /* Is the power turned on?   */
@@ -371,7 +371,7 @@ void lcd_init_device(void)
     lcd_init_gpio();
 /* Controller init */
     outl((inl(0x70000084) | (1 << 28)), 0x70000084);
-    GPO32 &= ~(1 << 28);
+    GPO32_VAL &= ~(1 << 28);
     DEV_INIT1 = ( (DEV_INIT1 & 0x03ffffff) | (0x15 << 26) );
     outl(((inl(0x70000014) & (0x0fffffff)) | (0x5 << 28)), 0x70000014);
     outl((inl(0x70000020) & ~(0x3 << 10)), 0x70000020);
@@ -419,9 +419,9 @@ void lcd_init_device(void)
 
 /* LCD init */
     /* Pull RESET low, then high to reset driver IC */
-    GPO32 &= ~(1 << 28);
+    GPO32_VAL &= ~(1 << 28);
     udelay(10000);
-    GPO32 |= (1 << 28);
+    GPO32_VAL |= (1 << 28);
     udelay(10000);
 
     lcd_display_on();