prepared an empty MMC driver

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5065 a1c6a512-1295-4272-9138-f99709370657

4 files changed, 292 insertions, 0 deletions

diff --git a/firmware/drivers/ata.c b/firmware/drivers/ata.c
index 05000b0..21d97aa 100644
--- a/firmware/drivers/ata.c
+++ b/firmware/drivers/ata.c
@@ -30,6 +30,9 @@
 #include "string.h"
 #include "hwcompat.h"
 
+/* skip whole file for an MMC-based system, FIXME in makefile */
+#ifndef HAVE_MMC 
+
 /* Uncomment the matching #define to use plain C code instead if the tweaked 
  * assembler code for disk reading or writing should cause problems. */
 /* #define PREFER_C_READING */
@@ -1170,3 +1173,5 @@ int ata_init(void)
 
     return 0;
 }
+
+#endif /* #ifndef HAVE_MMC */
\ No newline at end of file
diff --git a/firmware/drivers/ata_mmc.c b/firmware/drivers/ata_mmc.c
new file mode 100644
index 0000000..a366957
--- /dev/null
+++ b/firmware/drivers/ata_mmc.c
@@ -0,0 +1,280 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2002 by Alan Korr
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include <stdbool.h>
+#include "ata.h"
+#include "kernel.h"
+#include "thread.h"
+#include "led.h"
+#include "sh7034.h"
+#include "system.h"
+#include "debug.h"
+#include "panic.h"
+#include "usb.h"
+#include "power.h"
+#include "string.h"
+#include "hwcompat.h"
+
+/* use file for an MMC-based system, FIXME in makefile */
+#ifdef HAVE_MMC 
+
+#define SECTOR_SIZE     512
+#define Q_SLEEP 0
+
+/* for compatibility */
+bool old_recorder = false; /* FIXME: get rid of this cross-dependency */
+int ata_spinup_time = 0;
+static int sleep_timeout = 5*HZ;
+char ata_device = 0; /* device 0 (master) or 1 (slave) */
+int ata_io_address = 0; /* 0x300 or 0x200, only valid on recorder */
+static unsigned short identify_info[SECTOR_SIZE];
+
+static struct mutex ata_mtx;
+
+static bool sleeping = true;
+
+static char ata_stack[DEFAULT_STACK_SIZE];
+static const char ata_thread_name[] = "ata";
+static struct event_queue ata_queue;
+static bool initialized = false;
+static bool delayed_write = false;
+static unsigned char delayed_sector[SECTOR_SIZE];
+static int delayed_sector_num;
+
+static long last_user_activity = -1;
+long last_disk_activity = -1;
+
+
+int ata_read_sectors(unsigned long start,
+                     int incount,
+                     void* inbuf)
+{
+    int ret = 0;
+
+    mutex_lock(&ata_mtx);
+
+    last_disk_activity = current_tick;
+
+    led(true);
+    sleeping = false;
+
+    /* ToDo: action */
+    (void)start;
+    (void)incount;
+    (void)inbuf;
+
+    led(false);
+
+    mutex_unlock(&ata_mtx);
+
+    /* only flush if reading went ok */
+    if ( (ret == 0) && delayed_write )
+        ata_flush();
+
+    return ret;
+}
+
+
+
+int ata_write_sectors(unsigned long start,
+                      int count,
+                      const void* buf)
+{
+    int ret = 0;
+
+    if (start == 0)
+        panicf("Writing on sector 0\n");
+
+    mutex_lock(&ata_mtx);
+    sleeping = false;
+    
+    last_disk_activity = current_tick;
+
+    led(true);
+
+    /* ToDo: action */
+    (void)start;
+    (void)count;
+    (void)buf;
+
+    led(false);
+
+    mutex_unlock(&ata_mtx);
+
+    /* only flush if writing went ok */
+    if ( (ret == 0) && delayed_write )
+        ata_flush();
+
+    return ret;
+}
+
+extern void ata_delayed_write(unsigned long sector, const void* buf)
+{
+    memcpy(delayed_sector, buf, SECTOR_SIZE);
+    delayed_sector_num = sector;
+    delayed_write = true;
+}
+
+extern void ata_flush(void)
+{
+    if ( delayed_write ) {
+        DEBUGF("ata_flush()\n");
+        delayed_write = false;
+        ata_write_sectors(delayed_sector_num, 1, delayed_sector);
+    }
+}
+
+void ata_spindown(int seconds)
+{
+    sleep_timeout = seconds * HZ;
+}
+
+bool ata_disk_is_active(void)
+{
+    return !sleeping;
+}
+
+static int ata_perform_sleep(void)
+{
+    int ret = 0;
+
+    mutex_lock(&ata_mtx);
+
+    /* ToDo: is there an equivalent? */
+
+    sleeping = true;
+    mutex_unlock(&ata_mtx);
+    return ret;
+}
+
+int ata_standby(int time)
+{
+    int ret = 0;
+
+    mutex_lock(&ata_mtx);
+
+    /* ToDo: is there an equivalent? */
+    (void)time;
+
+    mutex_unlock(&ata_mtx);
+    return ret;
+}
+
+int ata_sleep(void)
+{
+    queue_post(&ata_queue, Q_SLEEP, NULL);
+    return 0;
+}
+
+void ata_spin(void)
+{
+    last_user_activity = current_tick;
+}
+
+static void ata_thread(void)
+{
+    static long last_sleep = 0;
+    struct event ev;
+    
+    while (1) {
+        while ( queue_empty( &ata_queue ) ) {
+            if ( sleep_timeout && !sleeping &&
+                 TIME_AFTER( current_tick, 
+                             last_user_activity + sleep_timeout ) &&
+                 TIME_AFTER( current_tick, 
+                             last_disk_activity + sleep_timeout ) )
+            {
+                ata_perform_sleep();
+                last_sleep = current_tick;
+            }
+
+            sleep(HZ/4);
+        }
+        queue_wait(&ata_queue, &ev);
+        switch ( ev.id ) {
+#ifndef USB_NONE
+            case SYS_USB_CONNECTED:
+                /* Tell the USB thread that we are safe */
+                DEBUGF("ata_thread got SYS_USB_CONNECTED\n");
+                usb_acknowledge(SYS_USB_CONNECTED_ACK);
+
+                /* Wait until the USB cable is extracted again */
+                usb_wait_for_disconnect(&ata_queue);
+                break;
+#endif
+            case Q_SLEEP:
+                last_disk_activity = current_tick - sleep_timeout + (HZ/2);
+                break;
+        }
+    }
+}
+
+/* Hardware reset protocol as specified in chapter 9.1, ATA spec draft v5 */
+int ata_hard_reset(void)
+{
+    int ret = 0;
+    
+    return ret;
+}
+
+int ata_soft_reset(void)
+{
+    int ret = 0;
+
+    return ret;
+}
+
+void ata_enable(bool on)
+{
+    (void)on;
+}
+
+unsigned short* ata_get_identify(void)
+{
+    return identify_info;
+}
+
+int ata_init(void)
+{
+    int rc = 0;
+
+    mutex_init(&ata_mtx);
+
+    led(false);
+
+    /* ToDo: Port setup */
+    // PAIOR |= 0x1680;
+
+
+    sleeping = false;
+    ata_enable(true);
+
+    if ( !initialized ) {
+
+        queue_init(&ata_queue);
+
+        last_disk_activity = current_tick;
+        create_thread(ata_thread, ata_stack,
+                      sizeof(ata_stack), ata_thread_name);
+        initialized = true;
+    }
+
+    return rc;
+}
+
+#endif /* #ifdef HAVE_MMC */
diff --git a/firmware/export/config-ondiofm.h b/firmware/export/config-ondiofm.h
index 646dedd..b7b557e 100644
--- a/firmware/export/config-ondiofm.h
+++ b/firmware/export/config-ondiofm.h
@@ -61,3 +61,6 @@
 /* Define this for different ADC channel assignment */
 #define HAVE_ONDIO_ADC
 
+/* Define this for MMC support instead of ATA harddisk */
+#define HAVE_MMC
+
diff --git a/firmware/export/config-ondiosp.h b/firmware/export/config-ondiosp.h
index 7e364f7..4189448 100644
--- a/firmware/export/config-ondiosp.h
+++ b/firmware/export/config-ondiosp.h
@@ -60,3 +60,7 @@
 
 /* Define this for different ADC channel assignment */
 #define HAVE_ONDIO_ADC
+
+/* Define this for MMC support instead of ATA harddisk */
+#define HAVE_MMC
+