early and not yet working support for H300 builds

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6718 a1c6a512-1295-4272-9138-f99709370657

2 files changed, 81 insertions, 1 deletions

diff --git a/firmware/export/config-h300.h b/firmware/export/config-h300.h
new file mode 100644
index 0000000..654d9c1
--- /dev/null
+++ b/firmware/export/config-h300.h
@@ -0,0 +1,74 @@
+/* define this if you have recording possibility */
+/*#define HAVE_RECORDING 1*/
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP 1
+
+/* LCD dimensions */
+#define LCD_WIDTH  220
+#define LCD_HEIGHT 176
+
+/* remote LCD */
+#define LCD_REMOTE_WIDTH  128
+#define LCD_REMOTE_HEIGHT 64
+
+#define CONFIG_KEYPAD IRIVER_H300_PAD
+
+#define CONFIG_REMOTE_KEYPAD H300_REMOTE
+
+/* Define this if you do software codec */
+#define CONFIG_HWCODEC MASNONE
+
+/* Define this if you have an remote lcd */
+#define HAVE_REMOTE_LCD
+
+#ifndef SIMULATOR
+
+/* Define this if you have a Motorola SCF5249 */
+#define CONFIG_CPU MCF5249
+
+#define CONFIG_I2C I2C_H100
+
+/* Type of mobile power */
+#define CONFIG_BATTERY BATT_LIPOL1300
+
+#define BATTERY_SCALE_FACTOR 16665 /* FIX: this value is picked at random */
+
+/* Define this if the platform can charge batteries */
+#define HAVE_CHARGING 1
+
+/* The start address index for ROM builds */
+#define ROM_START 0x11010
+
+/* Define this for LCD backlight available */
+#define CONFIG_BACKLIGHT BL_IRIVER /* port controlled */
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      11289600
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+#define CONFIG_LCD LCD_S1D15E06
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+#define USB_IRIVERSTYLE
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT ".iriver"
+#define BOOTFILE "rockbox" BOOTFILE_EXT
+
+/* Define this if you can control the S/PDIF power */
+#define HAVE_SPDIF_POWER
+
+#endif
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 6faaa49..c5b694e 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -45,9 +45,11 @@
 #define ONDIO_PAD       2
 #define IRIVER_H100_PAD 3
 #define GMINI100_PAD    4
+#define IRIVER_H300_PAD 3
 
 /* CONFIG_REMOTE_KEYPAD */
-#define H100_REMOTE 0 
+#define H100_REMOTE 0
+#define H300_REMOTE 1
 
 /* CONFIG_BATTERY */
 #define BATT_LIION2200  2200 /* FM/V2 recorder type */
@@ -60,6 +62,8 @@
 #define LCD_SSD1815  1 /* as used by Archos Recorders and Ondios */
 #define LCD_SSD1801  2 /* as used by Archos Player/Studio */
 #define LCD_S1D15E06 3 /* as used by iRiver H100 series */
+#define LCD_H300     4 /* as used by iRiver H300 series, exact model name is
+                          unknown at the time of this writing */
 
 /* CONFIG_BACKLIGHT */
 #define BL_PA14_LO  0 /* Player, PA14 low active */
@@ -94,6 +98,8 @@
 #include "config-ondiofm.h"
 #elif defined(IRIVER_H100)
 #include "config-h100.h"
+#elif defined(IRIVER_H300)
+#include "config-h300.h"
 #elif defined(ARCHOS_GMINI120)
 #include "config-gmini120.h"
 #elif defined(ARCHOS_GMINISP)