rk27xx - update config files

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30455 a1c6a512-1295-4272-9138-f99709370657

2 files changed, 23 insertions, 7 deletions

diff --git a/firmware/export/config.h b/firmware/export/config.h
index e1ce15a..8addb62 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -139,6 +139,7 @@
 #define SDL_PAD            46
 #define MPIO_HD300_PAD     47
 #define SANSA_FUZEPLUS_PAD 48
+#define RK27XX_GENERIC_PAD 49
 
 /* CONFIG_REMOTE_KEYPAD */
 #define H100_REMOTE   1
@@ -309,6 +310,7 @@ Lyre prototype 1 */
 #define USBOTG_AS3525   3525 /* AMS AS3525 */
 #define USBOTG_AS3525v2 3535 /* AMS AS3525v2 FIXME : same as S3C6400X */
 #define USBOTG_S3C6400X 6400 /* Samsung S3C6400X, also used in the S5L8701/S5L8702/S5L8720 */
+#define USBOTG_RK27XX   2700 /* Rockchip rk27xx */
 
 /* Multiple cores */
 #define CPU 0
@@ -769,6 +771,9 @@ Lyre prototype 1 */
 #elif CONFIG_USBOTG == USBOTG_AS3525v2
 #define USB_STATUS_BY_EVENT
 #define USB_DETECT_BY_CORE
+#elif CONFIG_USBOTG == USBOTG_RK27XX
+#define USB_STATUS_BY_EVENT
+#define USB_DETECT_BY_CORE
 #endif /* CONFIG_USB == */
 #endif /* HAVE_USBSTACK */
 
diff --git a/firmware/export/config/rk27generic.h b/firmware/export/config/rk27generic.h
index 6ed7353..b2c74bd 100644
--- a/firmware/export/config/rk27generic.h
+++ b/firmware/export/config/rk27generic.h
@@ -13,7 +13,7 @@
 

 /* Define bitmask of input sources - recordable bitmask can be defined

    explicitly if different */

-#define INPUT_SRC_CAPS (SRC_CAP_LINEIN)

+/* #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FM) */

 

 /* define the bitmask of hardware sample rates */

 #define HW_SAMPR_CAPS   (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \

@@ -61,6 +61,7 @@
 #define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)

 

 #define CONFIG_NAND NAND_RK27XX

+#define HAVE_SW_TONE_CONTROLS

 

 /* commented for now */

 /* #define HAVE_HOTSWAP */

@@ -90,7 +91,7 @@
 /* TODO: #define HAVE_LCD_SLEEP_SETTING */

 #endif

 

-#define CONFIG_KEYPAD IPOD_4G_PAD

+#define CONFIG_KEYPAD RK27XX_GENERIC_PAD

 

 /* Define this to enable morse code input */

 #define HAVE_MORSE_INPUT

@@ -107,18 +108,17 @@
 #define CONFIG_LCD LCD_SPFD5420A

 

 /* Define the type of audio codec */

-/* #define HAVE_RK27XX_CODEC */

+#define HAVE_RK27XX_CODEC

 

 /* #define HAVE_PCM_DMA_ADDRESS */

 

 /* Define this for LCD backlight available */

 #define HAVE_BACKLIGHT

 #define HAVE_BACKLIGHT_BRIGHTNESS

-

-/* Main LCD backlight brightness range and defaults */

 #define MIN_BRIGHTNESS_SETTING      0

 #define MAX_BRIGHTNESS_SETTING      31

-#define DEFAULT_BRIGHTNESS_SETTING  18

+#define DEFAULT_BRIGHTNESS_SETTING   20

+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG

 

 /* Define this if you have a software controlled poweroff */

 #define HAVE_SW_POWEROFF

@@ -147,6 +147,17 @@
 /* define this if the unit can be powered or charged via USB */

 #define HAVE_USB_POWER

 

+/* USB On-the-go */

+#define CONFIG_USBOTG USBOTG_RK27XX

+

+/* enable these for the experimental usb stack */

+#define HAVE_USBSTACK

+

+#define USE_ROCKBOX_USB

+#define USB_VENDOR_ID 0x071b

+#define USB_PRODUCT_ID 0x3202

+#define HAVE_BOOTLOADER_USB_MODE

+

 /* Define this if your LCD can set contrast */

 /* #define HAVE_LCD_CONTRAST */

 

@@ -160,7 +171,7 @@
 #define CPU_FREQ        200000000

 

 /* define this if the hardware can be powered off while charging */

-#define HAVE_POWEROFF_WHILE_CHARGING

+/* #define HAVE_POWEROFF_WHILE_CHARGING */

 

 /* Offset ( in the firmware file's header ) to the file CRC */

 #define FIRMWARE_OFFSET_FILE_CRC 0