imx233: rewrite icoll to use new register headers

Change-Id: I0bf30849d18a8493627025b383ce75ce524777ab

2 files changed, 9 insertions, 28 deletions

diff --git a/firmware/target/arm/imx233/icoll-imx233.c b/firmware/target/arm/imx233/icoll-imx233.c
index 0d78533..1bd363e 100644
--- a/firmware/target/arm/imx233/icoll-imx233.c
+++ b/firmware/target/arm/imx233/icoll-imx233.c
@@ -113,7 +113,7 @@ static uint32_t irq_count[INT_SRC_NR_SOURCES];
 struct imx233_icoll_irq_info_t imx233_icoll_get_irq_info(int src)
 {
     struct imx233_icoll_irq_info_t info;
-    info.enabled = !!(HW_ICOLL_INTERRUPT(src) & HW_ICOLL_INTERRUPT__ENABLE);
+    info.enabled = BF_RDn(ICOLL_INTERRUPTn, src, ENABLE);
     info.freq = irq_count_old[src];
     return info;
 }
@@ -145,7 +145,7 @@ void irq_handler(void)
         do_irq_stat();
     (*(isr_t *)HW_ICOLL_VECTOR)();
     /* acknowledge completion of IRQ (all use the same priority 0) */
-    HW_ICOLL_LEVELACK = HW_ICOLL_LEVELACK__LEVEL0;
+    HW_ICOLL_LEVELACK = BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0;
 }
 
 void fiq_handler(void)
@@ -155,23 +155,21 @@ void fiq_handler(void)
 void imx233_icoll_enable_interrupt(int src, bool enable)
 {
     if(enable)
-        __REG_SET(HW_ICOLL_INTERRUPT(src)) = HW_ICOLL_INTERRUPT__ENABLE;
+        BF_SETn(ICOLL_INTERRUPTn, src, ENABLE);
     else
-        __REG_CLR(HW_ICOLL_INTERRUPT(src)) = HW_ICOLL_INTERRUPT__ENABLE;
+        BF_CLRn(ICOLL_INTERRUPTn, src, ENABLE);
 }
 
 void imx233_icoll_init(void)
 {
     imx233_reset_block(&HW_ICOLL_CTRL);
-    /* disable all interrupts */
+    /* disable all interrupts:
+     * priority = 0, disable, disable fiq */
     for(int i = 0; i < INT_SRC_NR_SOURCES; i++)
-    {
-        /* priority = 0, disable, disable fiq */
-        HW_ICOLL_INTERRUPT(i) = 0;
-    }
+        HW_ICOLL_INTERRUPTn(i) = 0;
     /* setup vbase as isr_table */
     HW_ICOLL_VBASE = (uint32_t)&isr_table;
     /* enable final irq bit */
-    __REG_SET(HW_ICOLL_CTRL) = HW_ICOLL_CTRL__IRQ_FINAL_ENABLE;
+    BF_SET(ICOLL_CTRL, IRQ_FINAL_ENABLE);
 }
 
diff --git a/firmware/target/arm/imx233/icoll-imx233.h b/firmware/target/arm/imx233/icoll-imx233.h
index d1bf8a1..e44b67f 100644
--- a/firmware/target/arm/imx233/icoll-imx233.h
+++ b/firmware/target/arm/imx233/icoll-imx233.h
@@ -24,24 +24,7 @@
 #include "config.h"
 #include "system.h"
 
-/* Interrupt collector */
-#define HW_ICOLL_BASE           0x80000000
-
-#define HW_ICOLL_VECTOR         (*(volatile uint32_t *)(HW_ICOLL_BASE + 0x0))
-
-#define HW_ICOLL_LEVELACK       (*(volatile uint32_t *)(HW_ICOLL_BASE + 0x10))
-#define HW_ICOLL_LEVELACK__LEVEL0   0x1
-
-#define HW_ICOLL_CTRL           (*(volatile uint32_t *)(HW_ICOLL_BASE + 0x20))
-#define HW_ICOLL_CTRL__IRQ_FINAL_ENABLE (1 << 16)
-#define HW_ICOLL_CTRL__ARM_RSE_MODE     (1 << 18)
-
-#define HW_ICOLL_VBASE          (*(volatile uint32_t *)(HW_ICOLL_BASE + 0x40))
-#define HW_ICOLL_INTERRUPT(i)   (*(volatile uint32_t *)(HW_ICOLL_BASE + 0x120 + (i) * 0x10))
-#define HW_ICOLL_INTERRUPT__PRIORITY_BM 0x3
-#define HW_ICOLL_INTERRUPT__ENABLE      0x4
-#define HW_ICOLL_INTERRUPT__SOFTIRQ     0x8
-#define HW_ICOLL_INTERRUPT__ENFIQ       0x10
+#include "regs/regs-icoll.h"
 
 #define INT_SRC_SSP2_ERROR  2
 #define INT_SRC_VDD5V       3