D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed).

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 11 insertions, 13 deletions

diff --git a/bootloader/telechips.c b/bootloader/telechips.c
index 4c8b6ef..da04101 100644
--- a/bootloader/telechips.c
+++ b/bootloader/telechips.c
@@ -43,7 +43,7 @@
 #include "common.h"
 
 #if defined(COWON_D2)
-#include "i2c.h"
+#include "pcf50606.h"
 #define LOAD_ADDRESS 0x20000000 /* DRAM_START */
 #endif
 
@@ -97,11 +97,11 @@ void show_debug_screen(void)
            how such a beast is going to work. Since it needs I2C read/write,
            it can't easily go on an interrupt-based tick task. */
         {
-            unsigned char buf[] = { 0x2f, (0xE<<1) | 1, /* ADC start for X+Y */
-                                    0, 0, 0 };
             int x,y;
-            i2c_write(0x10, buf, 2);
-            i2c_readmem(0x10, 0x2e, buf, 5);
+            unsigned char buf[5];
+            
+            pcf50606_write(PCF5060X_ADCC2, (0xE<<1) | 1); /* ADC start X+Y */
+            pcf50606_read_multiple(PCF5060X_ADCC1, buf, 5);
             x = (buf[2] << 2) | (buf[3] & 3);
             y = (buf[4] << 2) | ((buf[3] & 0xC) >> 2);
             printf("X: 0x%03x Y: 0x%03x",x,y);
@@ -111,10 +111,8 @@ void show_debug_screen(void)
             lcd_hline(x-5, x+5, y);
             lcd_vline(x, y-5, y+5);
 
-            buf[0] = 0x2f;
-            buf[1] = (0xF<<1) | 1;   /* ADC start for P1+P2 */
-            i2c_write(0x10, buf, 2);
-            i2c_readmem(0x10, 0x2e, buf, 5);
+            pcf50606_write(PCF5060X_ADCC2, (0xF<<1) | 1); /* ADC start P1+P2 */
+            pcf50606_read_multiple(PCF5060X_ADCC1, buf, 5);
             x = (buf[2] << 2) | (buf[3] & 3);
             y = (buf[4] << 2) | ((buf[3] & 0xC) >> 2);
             printf("P1: 0x%03x P2: 0x%03x",x,y);
@@ -188,13 +186,13 @@ void* main(void)
     {
         int(*kernel_entry)(void);
 
-        /* wait for button release to allow debug statememts to be read */
-        while (button_read_device()) {};
+        /* wait for hold release to allow debug statements to be read */
+        while (button_hold()) {};
     
         kernel_entry = (void*) loadbuffer;
         
-        /* allow entry to the debug screen if hold is on */
-        if (!button_hold()) rc = kernel_entry();
+        /* allow entry to the debug screen if still holding power */
+        if (!(button_read_device() & POWEROFF_BUTTON)) rc = kernel_entry();
     }
 #endif
     show_debug_screen();