Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30891 a1c6a512-1295-4272-9138-f99709370657

5 files changed, 180 insertions, 6 deletions

diff --git a/firmware/export/audiohw.h b/firmware/export/audiohw.h
index e40ee6e..6bf4d71 100644
--- a/firmware/export/audiohw.h
+++ b/firmware/export/audiohw.h
@@ -74,8 +74,8 @@
 #include "cs42l55.h"
 #elif defined(HAVE_IMX233_CODEC)
 #include "imx233-codec.h"
-#elif defined(HAVE_TDA1543)
-#include "tda1543.h"
+#elif defined(HAVE_DUMMY_CODEC)
+#include "dummy_codec.h"
 #endif
 #if (CONFIG_PLATFORM & PLATFORM_HOSTED)
 /* #include <SDL_audio.h> gives errors in other code areas,
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 0d0617b..65c27ce 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -141,6 +141,7 @@
 #define SANSA_FUZEPLUS_PAD 48
 #define RK27XX_GENERIC_PAD 49
 #define HM60X_PAD          50
+#define HM801_PAD          51
 
 /* CONFIG_REMOTE_KEYPAD */
 #define H100_REMOTE   1
@@ -463,6 +464,8 @@ Lyre prototype 1 */
 #include "config/rk27generic.h"
 #elif defined(HM60X)
 #include "config/hifimanhm60x.h"
+#elif defined(HM801)
+#include "config/hifimanhm801.h"
 #elif defined(SDLAPP)
 #include "config/sdlapp.h"
 #elif defined(ANDROID)
diff --git a/firmware/export/config/hifimanhm60x.h b/firmware/export/config/hifimanhm60x.h
index 88af364..6ac4380 100644
--- a/firmware/export/config/hifimanhm60x.h
+++ b/firmware/export/config/hifimanhm60x.h
@@ -17,7 +17,7 @@
                          SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
                          SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
 
-#define HAVE_TDA1543
+#define HAVE_DUMMY_CODEC
 #define CODEC_SLAVE
 /* define this if you have a bitmap LCD display */
 #define HAVE_LCD_BITMAP
diff --git a/firmware/export/config/hifimanhm801.h b/firmware/export/config/hifimanhm801.h
new file mode 100644
index 0000000..d0e805d
--- /dev/null
+++ b/firmware/export/config/hifimanhm801.h
@@ -0,0 +1,171 @@
+/*
+ * This config file is for HiFiMAN HM-60x reference design
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 80
+
+#define MODEL_NAME   "HiFiMAN HM-801"
+
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \
+                         SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
+                         SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
+
+#define HAVE_DUMMY_CODEC
+#define CODEC_SLAVE
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you can flip your LCD */
+/* #define HAVE_LCD_FLIP */
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you can invert the colours on your LCD */
+/* #define HAVE_LCD_INVERT */
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)
+
+#define CONFIG_NAND NAND_RK27XX
+#define HAVE_SW_TONE_CONTROLS
+
+/* commented for now */
+/* #define HAVE_HOTSWAP */
+
+#define NUM_DRIVES 2
+#define SECTOR_SIZE 512
+
+/* for small(ish) SD cards */
+#define HAVE_FAT16SUPPORT
+
+/* LCD dimensions */
+#define LCD_WIDTH  220
+#define LCD_HEIGHT 176
+#define LCD_DEPTH  16   /* pseudo 262.144 colors */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+/* Define this if the LCD can shut down */
+/* #define HAVE_LCD_SHUTDOWN */
+
+/* Define this if your LCD can be enabled/disabled */
+/* #define HAVE_LCD_ENABLE */
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+   should be defined as well. */
+#ifndef BOOTLOADER
+/* TODO: #define HAVE_LCD_SLEEP */
+/* TODO: #define HAVE_LCD_SLEEP_SETTING */
+#endif
+
+#define CONFIG_KEYPAD HM801_PAD
+
+/* Define this to enable morse code input */
+#define HAVE_MORSE_INPUT
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+#define CONFIG_LCD LCD_HX8340B
+
+/* #define HAVE_PCM_DMA_ADDRESS */
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+#define MIN_BRIGHTNESS_SETTING      0
+#define MAX_BRIGHTNESS_SETTING      31
+#define DEFAULT_BRIGHTNESS_SETTING   20
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* TODO: Figure out real values */
+#define BATTERY_CAPACITY_DEFAULT 4000 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN     3000 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX     4100 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC      50 /* capacity increment */
+#define BATTERY_TYPES_COUNT        1 /* only one type */
+
+/* Hardware controlled charging with monitoring */
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+/* define current usage levels */
+/* TODO: #define CURRENT_NORMAL
+ * TODO: #define CURRENT_BACKLIGHT  23
+ */
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_RK27XX
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+
+#define USE_ROCKBOX_USB
+#define USB_VENDOR_ID 0x071b
+#define USB_PRODUCT_ID 0x3202
+#define HAVE_BOOTLOADER_USB_MODE
+
+/* Define this if your LCD can set contrast */
+/* #define HAVE_LCD_CONTRAST */
+
+/* The exact type of CPU */
+#define CONFIG_CPU RK27XX
+
+/* I2C interface */
+#define CONFIG_I2C I2C_RK27XX
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ        200000000
+
+/* define this if the hardware can be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+#define STORAGE_NEEDS_ALIGN
+
+/* Define this if you have adjustable CPU frequency */
+/* #define HAVE_ADJUSTABLE_CPU_FREQ */
+
+#define BOOTFILE_EXT "rk27"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
diff --git a/firmware/export/tda1543.h b/firmware/export/dummy_codec.h
index 6561f08..b85ec8f 100644
--- a/firmware/export/tda1543.h
+++ b/firmware/export/dummy_codec.h
@@ -19,11 +19,11 @@
  * KIND, either express or implied.
  *
  ****************************************************************************/
-#ifndef __TDA1543_H_
-#define __TDA1543_H_
+#ifndef __DUMMY_CODEC_H_
+#define __DUMMY_CODEC_H_
 
 #define VOLUME_MIN   -1
 #define VOLUME_MAX   0
 
 
-#endif /* __TDA1543_H_ */
+#endif /* __DUMMY_CODEC_H_ */