diff options
| -rw-r--r-- | firmware/drivers/ata.c | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/firmware/drivers/ata.c b/firmware/drivers/ata.c index 397cb9a..2dca175 100644 --- a/firmware/drivers/ata.c +++ b/firmware/drivers/ata.c @@ -1022,7 +1022,15 @@ static int ata_power_on(void) int rc; ide_power_enable(true); - sleep(HZ/50); /* allow voltage to build up */ + sleep(HZ/4); /* allow voltage to build up */ + + /* Accessing the PP IDE controller too early after powering up the disk + * makes the core hang for a short time, causing an audio dropout. This + * also depends on the disk; iPod Mini G2 needs at least HZ/5 to get rid + * of the dropout. Since this time isn't additive (the wait_for_bsy() in + * ata_hard_reset() will shortened by the same amount), it's a good idea + * to do this on all HDD based targets. */ + if( ata_hard_reset() ) return -1; @@ -1235,7 +1243,7 @@ int ata_init(void) if (!ide_powered()) /* somebody has switched it off */ { ide_power_enable(true); - sleep(HZ/50); /* allow voltage to build up */ + sleep(HZ/4); /* allow voltage to build up */ } /* first try, hard reset at cold start only */ |