| Commit message (Collapse) | Author | Age |
| |
|
|
|
|
|
|
|
| |
actual drawing of the wps into apps/gui/wps_engine, things related to the actual screen are in apps/gui/music_screen.c (names are temporary unless noone comes up with anything better)
No real code changes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22062 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
| |
It adds a shortcut (combo or button) to directly go from the wps to the playlist viewer. The combos could possibly be improved on some targets, but I tried to keep a tad bit of consistency (was hardly possible).
I also added a corresponding touchscreen region and adapted cabbiev2.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22003 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
| |
a) check for trailing '|' so that it doesn't match wrong strings (a not-yet-existing "playlist" would match the existing "play")
b) don't recalculate the array length in each iteration
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21998 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
| |
* Move strncpy() from core to the pluginlib
* Introduce strlcpy() and use that instead in most places (use memcpy in a few) in core and some plugins
* Drop strncpy() from the codec api as no codec used it
* Bump codec and plugin api versions
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21863 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
remote wps might reserve the space for the statusbar even if its disabled
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21709 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20977 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
with & means that this will only get triggered if you hold down the area. cabbie WPS updated so the fwd/rwd icons will do that when held or skip fwd/back if just pressed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20974 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
hardware and can be used unconditionally (returning a 'c') or in a conditional. You can specify what to display if a target has the clock (the true case) and an alternative for targets without. This can be useful for e.g. the greyscale 160x128 WPSs or the Archos ones which work on players with and without the hardware. - Add the new tag to the WPS tag description in the manual. Change the headline to the less technical 'Time and Date' as per the discussion in IRC.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20961 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
| |
fwd/back buttons in the mr500 wps (a "button bar" will pop up for 2.5s when the screen is touched.)
icons by Johannes Voggenthaler
pitch screen icon is there but not used because that screen isnt fixed for the touhscreen yet
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20939 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
update the mr500 default wps to show how to do it (hint, press the shuffle/rep icon)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20937 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
|
| |
%T|x|y|width|height|action| <- setup a region (relative to the current viewport) where if pressed the "action" will be done (currently play/stop/prev/next/menu/browse work, suggestions for others to add and better names welcome)
%Tl<timeout> <- used as a conditional to say if the touchscreen was touched in the last <timeout>, use this to enable/disable button viewports or something... same syntax as other timeout tags
cabbiev2 for the mr500 has been modified to demonstrate the new tags. press the pause/play button to pause playback. press the rockbox logo to get back to the menu. pretty icons needed to make this more usable :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20753 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
|
| |
* Use events to notify things when the track has changed instead of the nasty has_track_changed()
* Event for when the mp3entry for the next track is avilable (which allows alot more tags to be static which means less redrawing in the WPS)
* virtually guarentee that the mp3entry sturct returned by audio_current/next_track() is going to be valid for the duration of the current track. The only time it wont be now is during the time between the codec finishing the previous track and the next track actually starting (~2s), but this is not an issue as long as it is called again when the TRACK_CHANGED event happens (or just use the pointer that gives)
It is still possible to confuse the WPS with the next tracks id3 info being displayed but this should fix itself up faster than it used to (and be harder to do)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20633 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
after the font is changed (with small changes by me)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20015 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19880 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
| |
pluginlib for use with greylib, and add source for a test scaled bmp
viewer using greylib.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19593 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19374 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19371 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19362 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19359 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19357 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19208 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19177 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
broken by r18773
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19113 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19111 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
are changed with the usual "back to browser" button (This button is ONLY stolen if the WPS you use uses this tag.
an example use:
%?mo<one|two|three>
meaning that when the WPS is first opened "one" will be displayed, pressing select will change it to showing two, pressing it again will show three, and once more will go back to showing one. The text there could be any wps tags (conditional viewports for example...)
There is no real limit on the amount of modes, but remember that if you create a WPS which uses this tag more than once that every use HAS to have the same amount of choices or bad things will happen.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19110 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
zero width causes a divide by zero, and a zero height simply doesn't make any sense, so we assume it was a mistake.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18863 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
| |
* Move the default value for %mv back into wps_parser.c where it belongs
* Add the debug line for the %mv tag
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18773 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
| |
being released to go back to false.
e.g %mv2 will stay true for 2 seconds or %mv3.5 is 3.5 seconds (same as the %t syntax)... if no number is specified it defaults to 1 second
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18769 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
being pressed (e.g %?mv<yes|no> ). It will stay true after its released for a little over half a second (not configurable unless someone comes up with a nice way to add a parameter to the tag? 1s is too long and .5s is too short...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18752 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
Closes FS#9327
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18362 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
several places it has been missing (as FS#6071).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18185 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
| |
cases when there are too many tokens, lines, sublines, viewports, strings, characters or conditional levels. This prevents the parser from failing silently or going on, as it used to do in those cases. Thanks to fml (Alexander Levin) for mentioning this issue.
I also changed the error types from #defines to an enum, for cleanliness.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18015 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
the code a little.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18008 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
though
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17957 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
into lcdwidth/lcdheight. Normal usercode should always use getwidth()/getheigth() as that returns the viewport width/height. Fixes issues that would have appeared in many places when introducing viewports with sizes != lcd sizes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17857 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
| |
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17789 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
|
| |
NOTE to WPS people....
%m has been removed, but (i think) because of the other %m tags it wont fail if you try loading a wps with %m|..|, it will just be ignored.
Also note that if the statusbar is enabled the default viewport is 8 pixels shorter than when its not, i.e (0,0) is really (0,8) if the statusbar is shown... I dont think this will be a major issue because almost no WPS show the bar and use bitmaps... text only WPS shouldnt be affected.
Please report problem screens in http://forums.rockbox.org/index.php?topic=17358.0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17763 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17760 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
** BREAKS CURRENT WPS's **
* %P has been removed, merged with the new %pb
* %pb is now %pb or %pb|bitmap|x|y|width|height| (any of those params can be - to use sane defaults... check wiki/task for more explaination)
* New %Vl and %Vd tags which are used to setup and display conditionaly displayed viewports (%Vl|<id>|<usual %V params>| to set up, then %Vd<id> to enable the viewport
* bumps the max allowed viewport count to 24
* you can setup 3 different progressbars in a WPS... max of one per viewport though
http://www.rockbox.org/tracker/task/9027?getfile=16785 is a simple perl script to convert old %P/%pb to the new %pb syntax
I'll commit changes to the cabbie wps soon which shows how to use %Vl/%Vd properly...
Reminder: %m will be removed soonish also so when fixing your WPS's remember to use conditional viewports to replace %m
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17759 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17698 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
actually set on 16-bit targets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17692 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(i.e %V|0|0|||||| )
default values are as follows:
width - lcd width - the x value
height - lcd height - y value
font - user font
fg colour - the themes fg colour on 16bit targets, black on greyscale targets
bg colour - the themes bg colour on 16bit targets, white on greyscale targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17690 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17582 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17280 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
errors. The reverting is moved from wps_parse() to wps_data_load().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16914 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
"backdrop.h", and correct remaining references to HAVE_LCD_REMOTE to HAVE_REMOTE_LCD
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16873 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16831 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
versions. Also remove a DEBUGF that should not have been left in.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16827 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16823 a1c6a512-1295-4272-9138-f99709370657
|