| Commit message (Expand) | Author | Age |
|---|
| ... | |
| * | Philips GoGear SA9200 port. Working bootloader and normal builds, including s... | Mark Arigo | 2008-05-21 |
| * | 1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) | Maurus Cuelenaere | 2008-05-14 |
| * | Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up ... | Mark Arigo | 2008-05-13 |
| * | Gigabeat S RoLo: Properly execute firmware copy from an IRAM stub because the... | Michael Sevakis | 2008-05-08 |
| * | Split up DMA and ATA, but don't enable it (yet). | Maurus Cuelenaere | 2008-05-05 |
| * | 1) add support for ata-as-arm | Maurus Cuelenaere | 2008-05-03 |
| * | Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX... | Dave Chapman | 2008-05-02 |
| * | get rid of the last mr500 yellow (again :p ) | Jonathan Gordon | 2008-04-28 |
| * | add more registers for the tsc2100 | Jonathan Gordon | 2008-04-27 |
| * | Gigabeat S: Implement i2c driver - transmit works but no testing of receiving... | Michael Sevakis | 2008-04-27 |
| * | Move the Telechips TCC77x SSD1815 LCD driver up a level in the target tree - ... | Dave Chapman | 2008-04-27 |
| * | - change the usb class driver framework to allow for device classes with more... | Frank Gevaerts | 2008-04-26 |
| * | Commit whole Creative Zen Vision:M target tree + all related firmware/ | Maurus Cuelenaere | 2008-04-24 |
| * | Add a PMIC-based RTC driver for Gigabeat S. | Michael Sevakis | 2008-04-24 |
| * | A few preparations for the D2 PCM driver: move driver up to TCC780x level, mo... | Rob Purchase | 2008-04-21 |
| * | UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plu... | Michael Sevakis | 2008-04-18 |
| * | Add GPIO manager. Get the PMIC interrupt handling working (along with power b... | Michael Sevakis | 2008-04-12 |
| * | Add a "View I/O Ports" screen for imx31. Show all GPIO contents. | Michael Sevakis | 2008-04-11 |
| * | Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developmen... | Michael Sevakis | 2008-04-11 |
| * | Make the greyscale library work on the m:robe 100. Testing on target done by ... | Jens Arnold | 2008-04-07 |
| * | Iriver remote LCD driver: * Split out assembler parts. * Reintroduced the 2 t... | Jens Arnold | 2008-04-06 |
| * | D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I... | Rob Purchase | 2008-04-04 |
| * | Split out the PCF5060x register defines into a common header and create a gen... | Rob Purchase | 2008-04-04 |
| * | Fix red and clean up meg-fx firmware sources. Remove an unused file. | Michael Sevakis | 2008-03-30 |
| * | Revert "initial Meizu M6SL port" | Marcoen Hirschberg | 2008-03-27 |
| * | cleanup some ifdefs | Marcoen Hirschberg | 2008-03-27 |
| * | initial Meizu M6SL port | Marcoen Hirschberg | 2008-03-27 |
| * | use HAVE_ATA to decide if ata.c should be compiled | Marcoen Hirschberg | 2008-03-27 |
| * | Back-ported the iAudio remote LCD driver optimisations to X5 and M5. | Jens Arnold | 2008-03-26 |
| * | iAudio M3: Optimised LCD driver, with more/better assembly code. Speedup is ~... | Jens Arnold | 2008-03-25 |
| * | Revert accidental tree commit. /me needs a smaller enter key... | Jens Arnold | 2008-03-25 |
| * | Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 2... | Jens Arnold | 2008-03-25 |
| * | Add a complete priority inheritance implementation to the scheduler (all mute... | Michael Sevakis | 2008-03-25 |
| * | D2: Implement LCD driver framebuffer as per E200/Gigabeat F. Kill a few warni... | Rob Purchase | 2008-03-23 |
| * | iAudio M3: ADC driver, making buttons and battery voltage reading work. * Dis... | Jens Arnold | 2008-03-17 |
| * | Implement the playback event handling as a system-wide multi-purpose event sy... | Miika Pekkarinen | 2008-03-16 |
| * | More iAudio M3 work. Target build compiles, but same problem regarding plugin... | Jens Arnold | 2008-03-14 |
| * | Make ATA work on M3. | Jens Arnold | 2008-03-12 |
| * | More iAudio M3 work. Bootloader compiles, but doesn't work yet. | Jens Arnold | 2008-03-12 |
| * | Move some sh specific assembler files into the target tree | Nils Wallménius | 2008-03-04 |
| * | remove usb_benchmark. Its usefulness is extremely limited, and the usb stack ... | Frank Gevaerts | 2008-03-03 |
| * | move the ifp7xx usb serial driver files to more specific names, to make the "... | Frank Gevaerts | 2008-03-02 |
| * | revert done | Christian Gmeiner | 2008-02-17 |
| * | FS#8611: move hw_info for pp targets into target tree | Christian Gmeiner | 2008-02-17 |
| * | Gigabeat S mixer: Make some progress. Get the tick and core sleep working usi... | Michael Sevakis | 2008-02-05 |
| * | mrobe 100: real time clock (if anybody recognises the RTC chip let me know) | Robert Kukla | 2008-02-03 |
| * | H10 20GB: Assembly YUV blitting and dithering. | Michael Sevakis | 2008-01-26 |
| * | Initial Cowon D2 commit: | Rob Purchase | 2008-01-14 |
| * | - share adc reading code between h10 and mrobe100 | Robert Kukla | 2008-01-12 |
| * | Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 ... | Jens Arnold | 2008-01-12 |
