| Commit message (Collapse) | Author | Age |
| |
|
|
|
|
|
|
|
|
| |
For Iriver h100 & h300 series we don't need always use WSPLL,
because in most cases WSPLL clock and SYSCLK has the same value,
and we have additional WSPLL errors to the output clock. Now that is fixed.
Change-Id: I04aebee659c57c45dc8603e409b9db42bdde534a
Reviewed-on: http://gerrit.rockbox.org/434
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Turn on 4x oversampling inside UDA1380 codec.
This allow will move the quantization noise to the higher frequencies,
that slightly improve the final sound quality.
Change-Id: Idf79cd877c526d8937a47c34e9c180d837a15db1
Reviewed-on: http://gerrit.rockbox.org/435
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Reviewed-by: Björn Stenberg <bjorn@haxx.se>
|
| |
|
|
| |
Change-Id: I9c1825296a788587b8d494d8514b3314847b0ff0
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is going right in since it's long overdue. If anything is goofed,
drop me a line or just tweak it yourself if you know what's wrong. :-)
Make HW/SW codec interface more uniform when emulating HW functionality
on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to-
DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX"
APIs are all in sound.c with none in DSP code any longer.
Reduce number of settings definitions needed by each codec by providing
defaults for common ones like balance, channels and SW tone controls.
Remove need for separate SIM code and tables and add virtual codec header
for hosted targets.
Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27652 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
| |
Remove audiohw_mute from header as well, and make this function static
to each driver (commented out when it was unused)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25733 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
playback and allow the use of a 256Fs clock signal directly at the SYSCLK input instead. This is required for the Meizus.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21975 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
adapt/implement it for the iriver h1xx/h3xx and the meizus.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21546 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
low-level duplication. A small test_sampr fix so it works on coldfire again.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19400 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
pre/post split initialization. Move some SoC-specific code like i2s_reset out of the codec drivers. Helps to unify drivers and it was only ever used to enable. I cannot possibly test everything so report (I'll be on call ;) or fix problems if any crop up.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19228 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
| |
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
have the same issue.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17630 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17516 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
have a return 0; --> kick it
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16300 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15904 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15902 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15727 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15720 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15687 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
| |
settings. Reduce max limit from 255% to 250% for cosmetic reasons, value of 255% was chosen because of (very) old restrictions in settings system anyway.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15057 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13684 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
|
|
| |
* unification of init and close
NOTE: audiohw_init is a void function now, because it never (can) fail
okay from JdGordon@irc
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13622 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13620 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13474 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
|
|
|
|
| |
* add mas35xx driver for all mas35xx targets. Later
mas35xx code from sound.c will move to this new driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13464 a1c6a512-1295-4272-9138-f99709370657
|
| |
|
|
| |
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13453 a1c6a512-1295-4272-9138-f99709370657
|
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
|