summaryrefslogtreecommitdiff
path: root/firmware/export/config/sansafuzev2.h (follow)
Commit message (Collapse)AuthorAge
* as3525v2: use the new USB DesignWare driverCástor Muñoz2016-08-15
| | | | | | Targets: sansaclipplus, samsaclipv2, sansaclipzip, sansafuzev2. Change-Id: I7773528a4e26707dd33fe9cb8948750d49570701
* Update runtime estimation after recent power optimizations.Michael Giacomelli2016-04-22
| | | | | | | Values taken from Mihail's Clip Zip, should be similar on all AMSv2 devices. Change-Id: I9432ecffea94afae224391a86f1d3fa46cd87bc0
* AMS: enable SD card support in bootloaderMihail Zenkov2016-04-20
| | | | | | | With this changes rockbox can be loaded from SD card when internal storage can't be mount (due to hardware or software problem). Change-Id: I32b20d3f341566364def747a708a54ba6b4a7f8b
* AMSv2: enable voltage scalingMihail Zenkov2016-04-13
| | | | Change-Id: I8d64b8578d28884e326f8b43100b3b4691f95acf
* AMS: power off while charging enabledMihail Zenkov2016-04-07
| | | | Change-Id: Icddf1ea0a03f0426e0cf9b99f05ea065f532fed5
* Disable voltage scaling.Michael Giacomelli2016-03-27
| | | | | | Crashes immediately. Something was wrong with the last commit. Change-Id: Ie8a05095369a6312dc151e0a393e97d3a3fc7a09
* Enable voltage scaling on AMSv2.Michael Giacomelli2016-03-27
| | | | | | | | | Voltage is reduced when the CPU is unboosted, resulting in a large reduction in power consumption. In analogy with the AMSv1 voltage scaling code (currently disabled due to problems with SD cards), I have defined a config file option to enable/disable it. Change-Id: Ia89c31ec06dd012354b4d53435e7b5b36243b206
* Enable frequency scaling on AMSv2 devices.Mihail Zenkov2016-01-21
| | | | | | | | | | Voltage scaling is not yet enabled, but will follow once we are sure these changes are stable. Preliminary testing suggests a large increase in battery life, which will be further improved by voltage scaling. Patch by Mihail Zenkov with help from myself and others on the forums. Change-Id: I171d20bbee19a48c13cd14efb0d023883cc8c687
* usb: finally get rid of USE_ROCKBOX_USB in Sansa bootloader, use bootloader usbAmaury Pouly2015-01-08
| | | | | | | | For some reason, the bootloader and config files didn't define HAVE_BOOTLOADER_USB_MODE, also remove the special cases in usb.c which they implied. Change-Id: I68c29be7d03627e64cac4ff7678e0c211e087a8c
* Get rid of USE_ROCKBOX_USBAmaury Pouly2015-01-08
| | | | | | | | | | | Except for unfinished or experimental ports, it isthe case that USE_ROCKBOX_USB and HAVE_USBSTACK are both defined or both undefined. Furthermore, it is a leftover of some early developments on the USB stack and doesn't make sense anymore. Change-Id: Ic87a865b6bb4c7c9a8d45d1f0bb0f2fb536b8cad Reviewed-on: http://gerrit.rockbox.org/1091 Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
* Implement lcd_get_dpi() for all bitmap targets.Thomas Martitz2014-03-03
| | | | | | | DPI values are autogenerated from the resolution and collected display size values. These values are inserted as comments as well. Change-Id: Id03aedf9af18348f773dfce002805e480f6751e8
* Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROLNils Wallménius2012-05-09
| | | | | | | | Also move the definition to config.h Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff Reviewed-on: http://gerrit.rockbox.org/234 Reviewed-by: Nils Wallménius <nils@rockbox.org>
* TARGET_TREE is not needed anymoreRafaël Carré2012-01-07
| | | | | | spotted by jhMikeS git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31597 a1c6a512-1295-4272-9138-f99709370657
* Rework powermgmt to enable code re-use on appliation and sims.Thomas Martitz2012-01-03
| | | | | | | | | | | | | | | | | | | | | * Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application) to break powermgmt.c's assumption about the ability to read battery voltage. There's now additionally percentage (android) and remaining time measure (maemo). No measure at all also works (sdl app). If voltage can't be measured, then battery_level() is king and it'll be used for power_history and runtime estimation. * Implement target's API in the simulator, i.e. _battery_voltage(), so it doesn't need to implement it's own powermgmt.c and other stubs. Now the sim behaves much more like a native target, although it still changes the simulated battery voltage quickly, * Other changes include include renaming battery_adc_voltage() to _battery_voltage(), for consistency with the new target functions and making some of the apps code aware that voltage and runtime estimation is not always available. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
* Remove USBOTG_AS3525v2Rafaël Carré2011-12-31
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31502 a1c6a512-1295-4272-9138-f99709370657
* AMSv2: enable USBRafaël Carré2011-12-13
| | | | | | This will help debugging, and can be disabled for releases if needed git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31226 a1c6a512-1295-4272-9138-f99709370657
* AS3525v1/v2:Michael Sevakis2011-12-08
| | | | | | | | | | | | | | | | | | Fix problems with volume of recorded material by converting 14-bit samples to 16-bit. Remove duplicate samples from recorded data and support proper samplerate since ADC runs 1/2 the codec clock. Support monitoring mono on both output channels by feeding data manually to I2SOUT under the right conditions. DMA is no longer used for recording since frames must be processed as described above but it does allow full-duplex audio. Miscellaneous change includes a proper constant (HW_SAMPR_DEFAULT) to reset the hardware samplerate when recording is closed. PP5024 and AS3525 have different default recording rates (22kHz and 44kHz respectively) but both have half-speed ADC. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31180 a1c6a512-1295-4272-9138-f99709370657
* Finally submit GUI boost (FS#8668). With this change the CPU is boosted ↵Andree Buschmann2011-11-11
| | | | | | (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30967 a1c6a512-1295-4272-9138-f99709370657
* Lower the maximum brightness of the fuzev2 backlight even more.Frank Gevaerts2011-07-31
| | | | | | | The previous maximum (20) still causes excessive heat for some people, and measurements (using a digital camera and a white screen) show that the maximum brightness in the OF corresponds to 12 in rockbox, so we use 12 now. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30227 a1c6a512-1295-4272-9138-f99709370657
* A few people have reported problems running the fuzev2 LCD at max ↵Michael Giacomelli2011-05-18
| | | | | | brightness. I don't have one of these players, but as a precaution lets lower the max brightness a bit until someone figures out why. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29896 a1c6a512-1295-4272-9138-f99709370657
* powermgmt.h: include config.hRafaël Carré2010-09-03
| | | | | | | | AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time The amount of current each target draws from the charger is defined in powermgmt-target.h git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
* The new Fuzev2 use the same FM chip than some Clip+Rafaël Carré2010-07-20
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27502 a1c6a512-1295-4272-9138-f99709370657
* AB_REPEAT_ENABLE was never defined to 2Rafaël Carré2010-07-18
| | | | | | There's only 2 possibilities: defined or undefined git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27483 a1c6a512-1295-4272-9138-f99709370657
* as3525*: enable USB stack in bootloader (but not USE_ROCKBOX_USB yet)Rafaël Carré2010-06-18
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26927 a1c6a512-1295-4272-9138-f99709370657
* FS#11402 by me : sd_enable for Sansa AMSv2Rafaël Carré2010-06-16
| | | | | | | Gets a bit more battery life Adjust current usage, it was a bit too low for Clipv2/Clip+ git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26866 a1c6a512-1295-4272-9138-f99709370657
* Fuzev1/v2 : lcd_set_flip()Rafaël Carré2010-05-29
| | | | | | FS#11329 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26372 a1c6a512-1295-4272-9138-f99709370657
* fuzev2: lcd_enable and lcd_invert() work fineRafaël Carré2010-05-27
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26343 a1c6a512-1295-4272-9138-f99709370657
* as3525v2: RTC alarmRafaël Carré2010-05-22
| | | | | | | A specific poweroff function needs to be used for wake-up to work Disable RTC in bootloaders for consistency with other Sansas git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
* Revert r26060. A better fix was found. The acceleration should be fixed once ↵Thomas Martitz2010-05-19
| | | | | | for all now. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26175 a1c6a512-1295-4272-9138-f99709370657
* as3525 usb: build as3525v2 file based on CONFIG_USBOTG, and fix warningsRafaël Carré2010-05-18
| | | | | | | | build it on fuzev2 and clipv2 too, it should be the same controller as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need to check for it in the .c file git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
* fuzev2: current estimation assuming same battery capacity than v1Rafaël Carré2010-05-13
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25979 a1c6a512-1295-4272-9138-f99709370657
* as3525v2: disable adjustable CPU frequencyRafaël Carré2010-05-10
| | | | | | | When the rest of the code is confirmed to work properly without CPU frequency changes, it will be possible to reliabily test set_cpu_frequency() git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: FM - tested on 2 different modelsRafaël Carré2010-05-05
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25818 a1c6a512-1295-4272-9138-f99709370657
* FS#11172 - Fuzev2: Read the scrollwheel scrollwheel via IRQThomas Martitz2010-04-27
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25736 a1c6a512-1295-4272-9138-f99709370657
* Revert part of r25489 as it didn't fix the problem, that the CPU frequency ↵Thomas Martitz2010-04-05
| | | | | | debug screen shows the wrong frequency after boot, properly. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25492 a1c6a512-1295-4272-9138-f99709370657
* as3525v2: Move codec into iram freeing 1MB for the audio buffer and also a ↵Thomas Martitz2010-04-05
| | | | | | small decoding speedup (iram seems to be 50% faster than dram when boosted and the same when unboosed). 32k is still reserved for the core and can be readjusted if needed. Codecs don't appear to ever need the 1MB (usually <350k only). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25491 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: Use 40MHz as unboosted frequency. The lcd speed and ui ↵Thomas Martitz2010-04-05
| | | | | | responsiveness is good at this freq. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25489 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: use RGB565SWAPPED (pointed out by amiconn) => 91fpsRafaël Carré2010-04-05
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25478 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: Scrollwheel works like a charm :)Thomas Martitz2010-04-01
| | | | | | Move scrollwheel parsing function into separate file as it's reused. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
* FS#11081 - Hotkey patch. Many targets supported, but some keymaps need work ↵Jeffrey Goode2010-04-01
| | | | | | before they can be switched on git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25414 a1c6a512-1295-4272-9138-f99709370657
* as3525v2: adjustable CPU freq : CGU_PROC is identical to as3525 after allRafaël Carré2010-04-01
| | | | | | | Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot Tested on fuzev1/Clip+ git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
* fuzev2 FM doesn't work (yet), don't try to record from itRafaël Carré2010-03-29
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25393 a1c6a512-1295-4272-9138-f99709370657
* as3525v2 : recording (FM only, no microphone yet)Rafaël Carré2010-03-29
| | | | | | | | | Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517 Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: fix backlight brightnessRafaël Carré2010-03-29
| | | | | | PMU registers are write-only git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25377 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: edit configRafaël Carré2010-03-28
| | | | | | | correct USB product ID remove a define which is common to all as3525v2 and then built-in in the driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25367 a1c6a512-1295-4272-9138-f99709370657
* Fuzev2: fix normal build: enable charging properly, disable FM, use as3525v2 cpuRafaël Carré2010-03-27
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25354 a1c6a512-1295-4272-9138-f99709370657
* A tiny bit more Sansa Fuze v2 work.Thomas Martitz2010-03-16
| | | | | | | | | | - buttonlight works - backlight turns on (quite weak though and no brightness adjustment/backlight off functional) - don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this - deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well - still no working bootloader/no lcd or buttons git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
* AS3525v2: disable cpu frequency changesRafaël Carré2010-03-04
| | | | | | | CGU_PROC looks different from as3525v1 and there have been reports of Clip+ becoming warm when boosted git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25020 a1c6a512-1295-4272-9138-f99709370657
* Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely ↵Thomas Martitz2010-02-25
untested. Compilation shows a warning for the first argument of the lcd_bitmap() call in show_logo(). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24911 a1c6a512-1295-4272-9138-f99709370657
generated by cgit v1.1 at 2026-05-13 05:48:57 +0000