summaryrefslogtreecommitdiff
path: root/firmware/export/config/vibe500.h (follow)
Commit message (Collapse)AuthorAge
* Get rid of USE_ROCKBOX_USBAmaury Pouly2015-01-08
| | | | | | | | | | | Except for unfinished or experimental ports, it isthe case that USE_ROCKBOX_USB and HAVE_USBSTACK are both defined or both undefined. Furthermore, it is a leftover of some early developments on the USB stack and doesn't make sense anymore. Change-Id: Ic87a865b6bb4c7c9a8d45d1f0bb0f2fb536b8cad Reviewed-on: http://gerrit.rockbox.org/1091 Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
* Implement lcd_get_dpi() for all bitmap targets.Thomas Martitz2014-03-03
| | | | | | | DPI values are autogenerated from the resolution and collected display size values. These values are inserted as comments as well. Change-Id: Id03aedf9af18348f773dfce002805e480f6751e8
* PP: Do not use ATA DMA in bootloaderMarcin Bukat2013-01-24
| | | | | | | | | | The build of bootloader with HAVE_ATA_DMA fails because of missing commit_discard_dcache(). This seems to be bigger problem as bootloader builds don't call cache_init() also which seems wrong. but I know too little about the PP platform to judge. For now use ATA DMA only in regular builds. Change-Id: I82873cb1771f5a95ebfbef91ce26744e3abd743c
* Re-enable PP502x ATA DMABoris Gjenero2013-01-24
| | | | | | | | | | | | | | | | PP502x ATA DMA was disabled in 55fab77 because it caused various instability on all targets using it. This instability is fixed in 583c948 via FS#12391. Here, ATA DMA is enabled for all PP502x targets except nano1g and hdd6330. For nano1g, there may be other causes of instability and more testing is needed. ATA DMA does not work on hdd6330. Change-Id: I786b9edb19e74e6eb957ab205ea026f0969200ac Reviewed-on: http://gerrit.rockbox.org/340 Tested-by: David Hooper <dave@beermex.com> Tested-by: Boris Gjenero <boris.gjenero@gmail.com> Reviewed-by: Szymon Dziok <b0hoon@o2.pl> Tested-by: Szymon Dziok <b0hoon@o2.pl> Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
* Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROLNils Wallménius2012-05-09
| | | | | | | | Also move the definition to config.h Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff Reviewed-on: http://gerrit.rockbox.org/234 Reviewed-by: Nils Wallménius <nils@rockbox.org>
* TARGET_TREE is not needed anymoreRafaël Carré2012-01-07
| | | | | | spotted by jhMikeS git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31597 a1c6a512-1295-4272-9138-f99709370657
* Rework powermgmt to enable code re-use on appliation and sims.Thomas Martitz2012-01-03
| | | | | | | | | | | | | | | | | | | | | * Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application) to break powermgmt.c's assumption about the ability to read battery voltage. There's now additionally percentage (android) and remaining time measure (maemo). No measure at all also works (sdl app). If voltage can't be measured, then battery_level() is king and it'll be used for power_history and runtime estimation. * Implement target's API in the simulator, i.e. _battery_voltage(), so it doesn't need to implement it's own powermgmt.c and other stubs. Now the sim behaves much more like a native target, although it still changes the simulated battery voltage quickly, * Other changes include include renaming battery_adc_voltage() to _battery_voltage(), for consistency with the new target functions and making some of the apps code aware that voltage and runtime estimation is not always available. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
* Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA ↵Andree Buschmann2011-03-01
| | | | | | DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29476 a1c6a512-1295-4272-9138-f99709370657
* AB_REPEAT_ENABLE was never defined to 2Rafaël Carré2010-07-18
| | | | | | There's only 2 possibilities: defined or undefined git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27483 a1c6a512-1295-4272-9138-f99709370657
* Add LBA48 support to all targets with ATA, except archoses whose USB bridge ↵Torne Wuff2010-04-09
| | | | | | | | | chip can't handle it. The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
* Switch on hotkey on several targets. Stole the WPS Show Track Info key for ↵Jeffrey Goode2010-04-02
| | | | | | most of them. Made up a free key for the rest. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25433 a1c6a512-1295-4272-9138-f99709370657
* FS#11081 - Hotkey patch. Many targets supported, but some keymaps need work ↵Jeffrey Goode2010-04-01
| | | | | | before they can be switched on git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25414 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: remove the old bootloader code (actually a lack of ↵Szymon Dziok2010-03-23
| | | | | | code) and make the main-pp.c acting like a true bootloader for the DAP. It's the first step to integrate the DAP with the RBUtil. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25311 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: clean up the power off, enable poweroff while charging.Szymon Dziok2010-03-01
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24987 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: Enable recording.Szymon Dziok2010-02-21
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24805 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: add RTC alarm.Szymon Dziok2010-02-17
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24728 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: Full RTC support.Szymon Dziok2010-02-17
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24726 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: correct main keymaps, enable full keyboard editing, ↵Szymon Dziok2010-02-11
| | | | | | enable morse input. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24600 a1c6a512-1295-4272-9138-f99709370657
* Packard Bell Vibe 500: Enable ATA DMA as in r24405.Szymon Dziok2010-02-10
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24585 a1c6a512-1295-4272-9138-f99709370657
* PBell vibe 500: ROLO fixSzymon Dziok2010-01-30
| | | | git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24385 a1c6a512-1295-4272-9138-f99709370657
* Add initial Packard Bell Vibe 500 port, by Szymon Dziok Frank Gevaerts2010-01-18
Author: Szymon Dziok Flyspray: FS#10912 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24276 a1c6a512-1295-4272-9138-f99709370657
generated by cgit v1.1 at 2026-05-20 17:08:39 +0000