index
:
rockbox
2048sp5
duke3d
master
puzzles
puzzlesmanual
quake5
wolf3d
working
xracer
My Rockbox tree
Franklin Wei
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
firmware
/
export
/
config
(
follow
)
Commit message (
Expand
)
Author
Age
*
Fix FS#9193. Remove recording source <Mic> for iPod Video and iPod nano 1G. T...
Andree Buschmann
2010-05-30
*
Fuzev1/v2 : lcd_set_flip()
Rafaël Carré
2010-05-29
*
Apply FS#9194 - LCD invert for Sansa c200/c200v2
Bertrik Sikken
2010-05-28
*
fuzev2: lcd_enable and lcd_invert() work fine
Rafaël Carré
2010-05-27
*
Clipv1 battery capacity is 330mAh
Rafaël Carré
2010-05-24
*
as3525v2: RTC alarm
Rafaël Carré
2010-05-22
*
fuzev1: don't enable RTC in the bootloader
Rafaël Carré
2010-05-22
*
Revert r26060. A better fix was found. The acceleration should be fixed once ...
Thomas Martitz
2010-05-19
*
Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power ...
Michael Sevakis
2010-05-18
*
Clip+: reboot on USB insert
Rafaël Carré
2010-05-18
*
Build overlay plugins for all targets with PLUGIN_BUFFER <= 0x10000 bytes
Rafaël Carré
2010-05-18
*
as3525 usb: build as3525v2 file based on CONFIG_USBOTG, and fix warnings
Rafaël Carré
2010-05-18
*
plugins: changes for targets with small plugin buffer (Clipv1)
Rafaël Carré
2010-05-18
*
as3525v2: add usb driver stub, enable usb phy&core init
Amaury Pouly
2010-05-18
*
Clip+: boot to OF if USB is connected
Rafaël Carré
2010-05-17
*
as3514/as3543 fixes
Rafaël Carré
2010-05-17
*
Do s/SWAP_WORDS/ATA_SWAP_WORDS/ to prevent namespace clashes.
Maurus Cuelenaere
2010-05-17
*
HD200 - use optimised read&write routines from ata-as-coldfire.S and drop hd2...
Marcin Bukat
2010-05-17
*
Gigabeat S: Not defining HAVE_POWEROFF_WHILE_CHARGING is far too disruptive g...
Michael Sevakis
2010-05-15
*
- Move uisimulator/sdl/*.[ch] into the target tree, under firmware/target/hos...
Thomas Martitz
2010-05-15
*
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feat...
Michael Sevakis
2010-05-15
*
Enable recording on clipv1/m200v4/c200v2
Rafaël Carré
2010-05-14
*
Disable shutting down with the charger connected on the gigabeat s since it d...
Nils Wallménius
2010-05-14
*
clipv2: current usage estimation
Rafaël Carré
2010-05-13
*
fuzev2: current estimation assuming same battery capacity than v1
Rafaël Carré
2010-05-13
*
Fix r25970 red and yellow *and* a bug uncovered for pp5002 where pcm_play_dma...
Michael Sevakis
2010-05-12
*
PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to ...
Michael Sevakis
2010-05-12
*
Gigabeat F/X: Let us clear up confusion about just what the core frequency is...
Michael Sevakis
2010-05-11
*
as3525(v1) : correct CPU_FREQ
Rafaël Carré
2010-05-10
*
as3525v2: disable adjustable CPU frequency
Rafaël Carré
2010-05-10
*
Update current usage for Fuzev1/e200v2/Clipv1
Rafaël Carré
2010-05-09
*
Move c/h files implementing/defining standard library stuff into a new libc d...
Thomas Martitz
2010-05-06
*
Clip+: current usage estimation based on battery bench
Rafaël Carré
2010-05-05
*
Fuzev2: FM - tested on 2 different models
Rafaël Carré
2010-05-05
*
Clip+: use correct 290mAh battery capacity
Rafaël Carré
2010-05-05
*
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528...
Michael Sevakis
2010-05-04
*
FS#11172 - Fuzev2: Read the scrollwheel scrollwheel via IRQ
Thomas Martitz
2010-04-27
*
Add MPIO HD200 port - new files
Marcin Bukat
2010-04-26
*
i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz,...
Michael Sevakis
2010-04-23
*
Enable SW tone control on gigabeat S, since HW tone controls for its DAC are ...
Torne Wuff
2010-04-13
*
Add LBA48 support to all targets with ATA, except archoses whose USB bridge c...
Torne Wuff
2010-04-09
*
Gigabeat S: A little more housekeeping. Move source clock frequencies to conf...
Michael Sevakis
2010-04-09
*
Revert part of r25489 as it didn't fix the problem, that the CPU frequency de...
Thomas Martitz
2010-04-05
*
as3525v2: Move codec into iram freeing 1MB for the audio buffer and also a sm...
Thomas Martitz
2010-04-05
*
Fuzev2: Use 40MHz as unboosted frequency. The lcd speed and ui responsiveness...
Thomas Martitz
2010-04-05
*
Fuzev2: use RGB565SWAPPED (pointed out by amiconn) => 91fps
Rafaël Carré
2010-04-05
*
Clipv2: enable USB stack (and use correct product ID)
Rafaël Carré
2010-04-03
*
Switch on hotkey on several targets. Stole the WPS Show Track Info key for m...
Jeffrey Goode
2010-04-02
*
Fuzev2: Scrollwheel works like a charm :)
Thomas Martitz
2010-04-01
*
FS#11081 - Hotkey patch. Many targets supported, but some keymaps need work ...
Jeffrey Goode
2010-04-01
[next]