summaryrefslogtreecommitdiff
path: root/firmware/export/s3c2440.h (follow)
Commit message (Expand)AuthorAge
* s5l870x : use mmu-arm.SRafaël Carré2010-04-13
* Replace hard coded memory sizeBob Cousins2009-10-31
* Many more drivers for mini2440. Now the main binary compiles and runs.Dominik Wenger2009-10-26
* Working Bootloader for mini2440. Dominik Wenger2009-10-22
* Initial mini2440 port.Dominik Wenger2009-10-19
* Remove OHCI registers from s3c2440.h and move them to their own header. Since...Frank Gevaerts2009-07-12
* Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.hRafaël Carré2009-06-29
* Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is...Michael Sevakis2009-02-11
* Meg-FX: s3c register definitions really should be unsigned. Switch from 'int'...Michael Sevakis2008-12-04
* Updated our source code header to explicitly mention that we are GPL v2 orDaniel Stenberg2008-06-28
* This is a big chunk of code necessary to prepare for Gigabeat F flash loading...Karl Kurbjun2008-04-22
* Fix the FRAME offset calculation on Gigabeat (m:robe 500 too?).Michael Sevakis2007-10-23
* Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:RobeKarl Kurbjun2007-10-23
* Get rid of yellow plus an optimization I should have seen in the first place.Michael Sevakis2007-07-05
* Gigabeat: Use vectored IRQ mode interrupts and add a trap for unhandled ones.Michael Sevakis2007-07-05
* Setup LCD ourselves; move LCD buffer and TTB to free up 1.7MB of memoryGreg White2007-01-13
* fix typoMarcoen Hirschberg2006-11-05
* reduce the number of gigabeat warningsMarcoen Hirschberg2006-10-23
* update the gigabeat code and move to target_treeMarcoen Hirschberg2006-08-12
* gigabeat related changesMarcoen Hirschberg2006-03-02
generated by cgit v1.1 at 2026-04-25 06:13:57 +0000