summaryrefslogtreecommitdiff
path: root/firmware/target/arm/as3525 (follow)
Commit message (Expand)AuthorAge
* Slightly increase CVDD2 on AMSv2.Michael Giacomelli2017-06-14
* Do some housekeeping with fat.h and SECTOR_SIZEMichael Sevakis2017-03-12
* Improve radio RDS driver and frameworkMichael Sevakis2017-02-11
* Slightly increase CVDD1 for Clip ZipMihail Zenkov2017-02-07
* sd-as3525v2: simplify logic and cleanupMihail Zenkov2017-01-27
* AMS: Return ascodec to interrupt-based I2C2 driverMichael Sevakis2017-01-25
* as3525v2: use the new USB DesignWare driverCástor Muñoz2016-08-15
* Increase CVDD1 only for Clip+ version 0Mihail Zenkov2016-08-11
* Increase CVDD1 for Clip+ to prevent ATA errorMihail Zenkov2016-08-10
* as3525: reverting I2C2 to non-interrupts versionMihail Zenkov2016-04-05
* Fix checking for CONFIG_CHARGINGMihail Zenkov2016-04-04
* Enable voltage scaling on AMSv2.Michael Giacomelli2016-03-27
* AMSv2: additional delay for voltage scalingMihail Zenkov2016-03-27
* AMSv2: DBOP frequency divided by 2Mihail Zenkov2016-03-27
* Slightly increase VDD2 on AMSv2.Michael Giacomelli2016-03-24
* sd-as3525v2: prevent DTO error and DMA problemsMihail Zenkov2016-03-18
* sd-as3525v2: exit with error if transfer failureMihail Zenkov2016-03-18
* sd-as3525v2: Limit number of retryMihail Zenkov2016-03-18
* Enable frequency scaling on AMSv2 devices.Mihail Zenkov2016-01-21
* Make sure the system is boosted before enabling USB hardware.Michael Giacomelli2016-01-18
* Increase button delays in preperation for frequency scaling.Michael Giacomelli2016-01-18
* Change the clipv2 button driver to use fixed delays rather than processor cyc...Michael Giacomelli2016-01-18
* AMS: Change DMA transfer size for audio.Mihail Zenkov2015-06-01
* AMS: Fix pop-clicks noise on play/stop.Mihail Zenkov2015-04-09
* Fix a race condition in as3525 I2C driver caused by stacked ISRs.Michael Sevakis2015-03-16
* Get rid of stupid _backlight_* function namesMarcin Bukat2015-01-12
* Get rid of USE_ROCKBOX_USBAmaury Pouly2015-01-08
* Fix compilation on amsv1.Michael Giacomelli2014-09-29
* Add various additional AS3525v2 SOC voltages to the debug screen.Michael Giacomelli2014-09-28
* Don't enable the current sink for the Clip Zip backlight until its actually n...Mihail Zenkov2014-09-28
* Rewrite filesystem code (WIP)Michael Sevakis2014-08-30
* Add missing kernel.h includes (hopefully all of them), take #3.Thomas Martitz2014-01-05
* Add missing kernel.h includes (hopefully all of them), take #2.Thomas Martitz2014-01-05
* Add missing kernel.h includes (hopefully all of them).Thomas Martitz2014-01-05
* Do not include kernel.h in system.h.Thomas Martitz2014-01-05
* Cleanup MV/MD macros a little.Michael Sevakis2013-08-17
* AMS: make sure ROM clock is always onRafaël Carré2012-11-12
* Revert my previous commit disabling the internal ROM clock during normalMichael Giacomelli2012-07-22
* lcd-ssd1303: Fix big oops putting height where there should've been width.Michael Sevakis2012-05-19
* ssd1303: make sure sansa clip and whatever others clip updates properly.Michael Sevakis2012-05-19
* remove debug-target.hRafaël Carré2012-05-07
* Sansa AMS: more compat irq namesRafaël Carré2012-05-07
* sansa AMS: i2s_reset() is never usedRafaël Carré2012-05-06
* Make INITDATA_ATTR work on everything that has INIT_ATTR enabled for code.Michael Sevakis2012-05-01
* AMSv1: rename USB interrupt handlerRafaël Carré2012-04-30
* usb-s3c6400: merge the 2 driversRafaël Carré2012-04-28
* sansa clip+: properly reset display using the reset pinBertrik Sikken2012-03-19
* AMSv2: add proper definitions for charge currentBertrik Sikken2012-03-04
* Revise the PCM callback system after adding multichannel audio.Michael Sevakis2012-03-03
* lcd drivers: Convert lcd_[remote_]framebuffer to a pointerJonathan Gordon2012-02-28
generated by cgit v1.1 at 2026-04-25 22:25:23 +0000