summaryrefslogtreecommitdiff
path: root/firmware/target (follow)
Commit message (Expand)AuthorAge
* Samsung YP-S3: add backlight-target.h for the YP-S3 (contains target specific...Bertrik Sikken2009-08-15
* Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggledRafaël Carré2009-08-15
* Fix YellowKarl Kurbjun2009-08-14
* Hopefully get all of the touchscreen drivers to act the same so release event...Karl Kurbjun2009-08-14
* mrobe100: power off HDD (courtesy of lowlight) ~2h extra playtime Robert Kukla2009-08-14
* don't treat extremely quick transfers as errorsFrank Gevaerts2009-08-13
* M:Robe 500: Forgot one.Karl Kurbjun2009-08-13
* M:Robe 500: Put more interrupts in iram, reduce stack usage when ARM/DSP tran...Karl Kurbjun2009-08-13
* TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 ...Rob Purchase2009-08-12
* M:Robe 500: Put the irq stack and fiq stack in iram. Reduce memory for fiq s...Karl Kurbjun2009-08-12
* Fix endpoint allocationFrank Gevaerts2009-08-11
* Sansa AMS: identify interrupts with no source setRafaël Carré2009-08-11
* Remove the comment also, Thanks to Rafaël Carré for spotting.Thomas Martitz2009-08-10
* Fix FS#10486 - "fuze screen not drawn correctly on backlight turn-on if playl...Thomas Martitz2009-08-10
* M:Robe 500: Get MPEGPlayer running at 320x240. Screen is zoomed so larger vi...Karl Kurbjun2009-08-10
* Samsung YP-S3: add beginning of a low-level NAND driver and update bootloader...Bertrik Sikken2009-08-09
* Fix ZVMKarl Kurbjun2009-08-09
* M:Robe 500: Start Building at 640x480 by default.Karl Kurbjun2009-08-09
* Apply FS#10447 - e200v2 lcd driver cleanup by Michael ChicoineBertrik Sikken2009-08-08
* Samsung yp-s3: clean up the lcd and button driver (making things static, rena...Bertrik Sikken2009-08-08
* Samsung YH925: Battery calibration for charging and dischharging.Thomas Martitz2009-08-07
* Samsung YH925: Support for battery monitoring and charging. Discharge curve n...Thomas Martitz2009-08-07
* Revert static-ing of iim_prod_rev, this function is never used so it causes a...Bertrik Sikken2009-08-06
* Various files: make functions static if they're local or make sure there is a...Bertrik Sikken2009-08-06
* Samsung YP-S3: allow player to stay powered up without the USB cable plugged ...Bertrik Sikken2009-08-05
* Samsung YP-S3: update backlight brightness curve again (can't go all the way ...Bertrik Sikken2009-08-02
* Pluginlib: Add support for general buttons. Add menu and quit buttons to Rev...Karl Kurbjun2009-08-02
* Fix red: only use SW_VOLUME_MIN if HAVE_SW_VOLUME_CONTROL is definedMaurus Cuelenaere2009-08-01
* * Move DSP_CALLBACK_* enum to sound.hMaurus Cuelenaere2009-08-01
* Samsung YP-S3: update backlight brightness curve so backlight is still on at ...Bertrik Sikken2009-08-01
* Meizu: update backlight brightness curve so backlight is still on at the mini...Bertrik Sikken2009-08-01
* Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/...Mark Arigo2009-08-01
* Samsung YP-S3: implement button lightsBertrik Sikken2009-08-01
* Samsung YP-S3: implement headphones detectionBertrik Sikken2009-08-01
* Ingenic Jz4740 timer driver: fix stupid mistakeMaurus Cuelenaere2009-08-01
* M:Robe 500/M66591: Add support for full-speed USB transfers, and fix the UART...Karl Kurbjun2009-08-01
* Samsung YP-S3: implement button driver for the touch keys (and the hold/power...Bertrik Sikken2009-08-01
* Meizu M3: check LCD_STATUS in the lcd driver instead of using delay loopsBertrik Sikken2009-07-30
* Start of a Rockbox port to the Samsung YP-S3.Bertrik Sikken2009-07-29
* Fix FS#5230 - reinit the opto-i2c after disabling hold so the buttons work againJonathan Gordon2009-07-29
* Meizu: fix mask for GPIO function selection used for fmradioBertrik Sikken2009-07-27
* Jz4740 timer driver: only init timer in timer_set() when start is trueMaurus Cuelenaere2009-07-27
* Jz4740 PCM driver: do 32-bit or 16-bit burst sizes if 16-byte ones won't fit ...Maurus Cuelenaere2009-07-27
* Jz4740 PCM driver: check whether pcm_callback_for_more isn't NULL (fixes metr...Maurus Cuelenaere2009-07-27
* Re-work D2 power off behaviour.Rob Purchase2009-07-26
* initial commit of remote support for m:robe 100 courtesy of lowlight; simulat...Robert Kukla2009-07-26
* Ingenic Jz4740 targets: turn backlight on when an exception occurs and EXTEND...Maurus Cuelenaere2009-07-26
* Onda VX747: don't fully init the LCD when not doing an USB_BOOT compile (fixe...Maurus Cuelenaere2009-07-26
* D2: Fix the POWER button check after an exception/panic. Make this power the ...Rob Purchase2009-07-25
* Revert r22034 since the backlight handling functions are not consistently nam...Rob Purchase2009-07-25
generated by cgit v1.1 at 2026-05-23 14:11:47 +0000